What is ilink tire?

What does a flashing red light in front of the car mean?

A flashing red light on the dashboard indicates that the vehicle has entered anti-theft mode. The functions of the electronic anti-theft device are as follows: 1. Anti-theft alarm function: This function means that after the owner remotely locks the doors, the alarm system enters the alert state. If someone attempts to pry open the door or use a key to open it, it will immediately trigger the anti-theft alarm, deterring thieves. 2. Door not closed: If the front door is not closed, the warning light will flash continuously for a few seconds. After locking the doors with the remote, if a door is not properly closed, the car lights will not stop flashing, and the horn will sound until the door is closed. 3. Vehicle locator: When the owner uses the remote to locate the car, the car horn will sound intermittently, accompanied by flashing car lights. 4. Remote central locking: When the remote sends the correct signal, the central locking system will automatically open or close. The electronic remote control device operates via remote, and the electronic key has a corresponding password.

2

Share

What is the function of the EGR valve?

The function of the EGR is exhaust gas recirculation. By introducing exhaust gas into the combustion chamber, it reduces the peak combustion temperature of the engine, thereby achieving the goal of reducing NOx emissions. Diesel vehicles use an external system, where a pipe connects the exhaust pipe to the intake pipe, and a valve is installed in the pipe to control the amount of exhaust gas entering. It can be seen that the EGR valve is the core component of the entire system, and how to precisely control and monitor it is the development direction of the EGR system. EGR: The full name is Exhaust Gas Recirculation, a technique (or method) in which part of the exhaust gas from internal combustion engines is separated after combustion and reintroduced into the intake side for re-combustion. EGR valves are divided into mechanical and electronic control types. The EGR valve guides the exhaust gas from the engine combustion back to the intake manifold to participate in combustion, thereby reducing the combustion chamber temperature, improving engine efficiency, enhancing the combustion environment, reducing engine load, effectively reducing NOx emissions, minimizing knock, and extending the service life of various components. The working principle of the EGR solenoid valve is as follows: The EGR solenoid valve has three air ports. When the EGR solenoid valve coil is not energized, the spring of the EGR valve presses the valve body upward, cutting off the atmospheric port. At this time, the intake manifold of the EGR solenoid valve is connected to the vacuum chamber of the EGR valve. When the EGR solenoid valve coil is energized, the EGR valve body moves downward, connecting the atmospheric port, while the intake manifold of the EGR valve is disconnected from the vacuum chamber. One side of the EGR valve diaphragm (lower part) is exposed to the atmosphere, and the other side with a spring is the vacuum chamber, whose vacuum degree is controlled by the EGR solenoid valve. Increasing the vacuum degree in the vacuum chamber causes the diaphragm to overcome the spring force and arch upward, increasing the valve opening and thus the exhaust gas recirculation flow. When the upper part loses vacuum, the diaphragm arches downward under the spring force, closing the valve and blocking exhaust gas recirculation. In addition, increasing the exhaust gas recirculation rate will reduce the total exhaust gas mass flow, so the total pollutant output in the exhaust emissions will be relatively reduced. The task of the EGR system is to ensure that the exhaust gas recirculation volume reaches the optimal condition at every operating point, keeping the combustion process in the most ideal state and ultimately minimizing the pollutant components in the emissions. Since changes in exhaust gas recirculation volume may have completely opposite effects on different pollutant components, the so-called optimal condition is often a compromise to achieve the best overall emission reduction of related pollutants. For example, although increasing the exhaust gas recirculation rate has a positive impact on reducing nitrogen oxide (NOx) emissions, it may also negatively affect the increase in particulate matter and other pollutant components. Control principle: The engine's operating conditions vary, and so do the requirements for EGR volume. To make the EGR system more effective, the amount of exhaust gas participating in EGR must be limited. As the load increases, the EGR volume also increases accordingly and can reach the optimal value. At idle and low load, NOx emission concentration is low, so EGR is not performed to ensure normal combustion. During warm-up, the engine temperature is low, and NOx emission concentration is also low. To prevent EGR from worsening the combustion process, EGR is not performed. At high load, high speed, or full throttle, EGR is not performed to ensure the engine's power performance. During acceleration, to ensure the vehicle's acceleration performance and necessary purification effect, EGR functions during the transition process. Control method: According to the design principle of EGR, EGR must be controlled and adjusted to achieve the expected effect in engine applications.

19

2

Share

What Are the Reasons Why a Car Key Cannot Start the Vehicle?

There are three reasons why a car key cannot start the vehicle: 1. The car steering wheel is locked. 2. The gear is not in the correct position. 3. The car itself has a malfunction. Detailed explanations are as follows: 1. The car steering wheel is locked. The steering wheel cannot be turned, and the key cannot be twisted either. This is a simple anti-theft feature of the vehicle, which happens to be at the intersection of key unlocking and lock cylinder torque. Just gently turn the steering wheel clockwise (or counterclockwise) and lightly twist the key to unlock it smoothly. Reminder: When parking, try to straighten the steering wheel before turning off the engine and removing the key. 2. The gear is not in the correct position. For automatic transmission cars, the gear must be placed in "P" (some cars include "N" gear) to start. Some cars cannot even remove the key unless the gear is in "P". Reminder: Develop good habits by placing the gear in "P" before turning off the engine. Check the gear position before starting. 3. The car itself has a malfunction. If the car still cannot start in "P" gear, or if the dashboard shows an abnormal gear position, it is recommended to seek repair promptly, as it could be due to a damaged electronic gear sensor or electro-pneumatic valve.

9

5

Share

How to Check Tire Pressure in Sagitar?

Here are the steps to check the tire pressure in Volkswagen Sagitar: 1. Pull the door handle in the Sagitar's cockpit to open the door and enter the driver's compartment. 2. Locate the vehicle's glove box at the illustrated position in the driver's compartment. 3. Pull the handle of the glove box to open it. 4. Inside the glove box, you will find a button labeled "SET", which is the tire pressure monitoring button. 5. Press this button to view the vehicle's tire pressure on the dashboard. Additional information: 1. The new Sagitar is equipped with a tire pressure monitoring system for accurate and timely tire pressure monitoring and alerts. You can monitor tire pressure anytime while driving to ensure safer journeys. After replacing tires or inflating them, press the SET button to reset the tire pressure. 2. The specified tire pressure values apply to cold tires. As tire temperature rises during driving, the pressure will be slightly higher than when cold (typically about 0.2 bar higher). 3. If the cold tire pressure meets the specified value, there is no need to reduce the pressure when the tires are hot. Doing so may result in under-inflation, which could lead to sudden tire bursts while driving. Over-inflation, especially during hot summer temperatures and high-speed driving, increases the risk of tire blowouts, potentially causing loss of vehicle control.

17

1

Share

Is the Soueast DX7 a joint venture car?

Soueast DX7 is not a joint venture car, but a compact SUV. Taking the Soueast DX7 2020 Xingyue DCT Luxury Edition as an example, its body dimensions are: length 4570mm, width 1905mm, height 1720mm, wheelbase 2700mm, minimum ground clearance 200mm, and fuel tank capacity 50 liters. The Soueast DX7 2020 Xingyue DCT Luxury Edition is equipped with a 1.5T turbocharged engine, with a maximum power of 145 kW and a maximum power speed of 5600 rpm, matched with a 7-speed dual-clutch transmission.

2

5

Share

What is the solution for the P0101 trouble code?

p0101 trouble code solution is: Contact your local dealer for inspection. The P0101 trouble code indicates an abnormal air flow sensor, and the reasons are: 1. PCV system leakage; 2. Oxygen sensor malfunction; 3. Exhaust leakage near the oxygen sensor or EGR leakage; 4. The air flow MAF sensor is too dirty; 5. Fuel injector blockage or insufficient fuel supply from the fuel pump. Trouble codes refer to: codes detected by the computer after a vehicle malfunction, helping technicians accurately locate and repair the faulty component. When clearing the code, it must be done strictly according to the specified method for the specific vehicle model, and the negative terminal of the battery should not be disconnected arbitrarily.

7

0

Share

What is ilink tire?

What does a flashing red light in front of the car mean?

What is the function of the EGR valve?

What Are the Reasons Why a Car Key Cannot Start the Vehicle?

How to Check Tire Pressure in Sagitar?

Is the Soueast DX7 a joint venture car?

What is the solution for the P0101 trouble code?

Solutions for Rear Displacement of the Right Front Wheel After a Collision

What is the ground clearance of the Vezel?

How to Reverse Without a Backup Camera?

How to reset the tire pressure warning light on Roewe 360?