What is Hycan Auto?

2 Answers
MacJake
07/24/25 5:41am
GAC NIO New Energy Automotive Technology Co., Ltd. is the predecessor of Hycan Auto, established in April 2018, jointly held by GAC Group, GAC New Energy, NIO Capital, NIO Inc., and the founding team. Hycan is the brand name launched by GAC NIO in 2019. Hycan Auto currently has two models: the Hycan 007 and the Hycan Z03. The Hycan 007 is a pure electric mid-size SUV, produced based on GAC New Energy's GEP platform. Its body dimensions are 4879*1937*1680mm, with a 5-door, 5-seat SUV body structure. It has a top speed of 170km/h, equipped with a front-mounted single motor and matched with a single-speed transmission for electric vehicles. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Hycan Z03 is a pure electric compact SUV from Hycan Auto, with body dimensions of 4602*1900*1645mm and a 5-door, 5-seat SUV body structure. It also features a front-mounted single motor and a single-speed transmission for electric vehicles. The front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension.
Was this review help?
17
3
Share
Bridget
08/11/25 1:25am
Last time at the auto show, I paid special attention to HYCAN Auto, which is quite an interesting new energy brand. It was originally established through a collaboration between NIO and GAC Group, and later received investment from Zhujiang Investment Management. I had the chance to test drive their HYCAN 007—the fastback design really catches the eye, and the triple-screen setup inside the cabin delivers strong tech vibes. With a range exceeding 600 km and L2+ autonomous driving features, it's quite impressive. The newer HYCAN Z03, launched last year, targets a younger demographic, featuring fold-flat rear seats that turn into a double bed—very practical. What stands out is their user co-creation model, frequently involving owners in product development, something rarely seen among traditional automakers. Their Guangzhou factory has ramped up production, and there are plans to build dedicated supercharging stations.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Where is the air filter element of the Jeep Cherokee located?

The air filter element of the Cherokee is located in the engine compartment, inside the air filter housing on the left side of the engine. According to the maintenance manual, the air filter element should generally be replaced every 10,000 to 20,000 kilometers or every other service interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. The function of the air filter element: to filter out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing floating dust from being sucked into the engine, which accelerates wear on the piston group and cylinders. Air filter element: It is a type of filter, also known as an air filter cartridge, air cleaner, or air filter. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filtration device. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly problematic in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that a sufficient amount of clean air enters the cylinders. Using a dirty air filter in a car can cause insufficient engine air intake, leading to incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car air filter is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities from the air before it enters the cylinders, thereby reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Therefore, before air enters the cylinders, it must first pass through the fine filtration of the air filter. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have minimal dust and light blockage, it can be cleaned using high-pressure air blown from the inside out and reused. Severely dirty air filters should be replaced promptly.
1
1
Share

How to Install a Roof Rack on the New Qashqai?

The installation of a roof rack on the new Qashqai can be done in two ways: adhesive type and drilling type. The adhesive-type roof rack uses 3M adhesive for fixation, which is only suitable for aesthetic purposes and cannot truly function as a luggage rack. If you intend to use it, drilling installation is required. For drilling installation on the roof, it involves waterproofing and rust prevention work on the car body, so it is recommended to have it installed at a professional modification shop. The installation tutorial for the adhesive-type aluminum alloy roof rack is as follows: 1. First, clean the roof: Thoroughly clean the area around the roof rain gutter, preferably with a cloth soaked in alcohol. Be careful not to apply excessive force during the process to avoid damaging the car paint. 2. Assemble the roof rack: The purchased roof rack parts are usually packaged separately, so attach the black rubber ends to the aluminum alloy roof rack bars. Do not confuse the left and right sides, as both the rubber ends and the roof rack bars are marked with L (left) and R (right). Then, tighten the screws, with two small screws on each end. 3. Apply the 3M adhesive to the roof rack: Since the 3M adhesive is in the form of double-sided tape, first peel it off and stick it to the rubber ends of the roof rack. The front and rear rubber ends are of different sizes, and the corresponding 3M adhesive pieces also vary in size. Do not mix them up; compare the sizes before sticking. After sticking, press firmly to ensure it is flat. 4. Determine the installation position: Place the two roof rack bars on the roof, aligning them according to the L and R markings on each bar to the left and right sides of the roof, respectively. The end with the larger rubber piece should face the rear of the car, with the rear end about 5 cm away from the seam at the rear door of the roof. The side end should be about 1 cm away from the inner edge of the black rain gutter. Note that the roof rack is not installed on the rain gutter but about 1 cm inside it. 5. Final installation: After determining the position, place the roof rack on the roof and check from a distance if the position is appropriate. If not, make minor adjustments until the final position is confirmed, then mark it with a water-based pen. The most critical step is to have two people present during installation. One person holds one end, peels off the protective layer of the 3M adhesive on the roof rack, stands on the tire, and presses it onto the determined position. Then, apply firm pressure for about 20 seconds to complete the installation.
13
5
Share

How to Improve Car Audio Sound Quality?

To improve car audio sound quality, follow these methods: 1. Start with the audio source. For CD players, choose models that do not modify the signal, preferably those with high pre-output power levels to enhance the signal-to-noise ratio. Always use original CDs. 2. When selecting speakers, first determine the type of system you want, such as a music-quality system, and choose speakers with clear and soft sound quality. 3. For amplifiers, focus on matching the power, sensitivity, and impedance with the speakers. If you aim for a high-end audio system, consider using an electronic crossover. Additionally, select high-quality power cables, fuse holders, signal cables, and speaker wires for the system.
19
2
Share

How Long Does the Subject Three Video Review Take?

Subject Three video review takes 5 to 7 days. Below are the relevant details: Pre-driving inspection: This involves walking around the vehicle for inspection. The test vehicle has buttons installed at all four corners, which must be pressed during the walk-around inspection to complete the process. Light test: The light test ensures that drivers are familiar with using vehicle lights in various nighttime scenarios. Simply follow the system prompts to switch lights accordingly. Passing schools or intersections: When approaching schools, bus stops, or intersections, reduce speed upon hearing the prompt and maintain it below 30 km/h, applying brakes appropriately.
10
2
Share

How to Check the Tread Depth of Car Tires?

Methods to check the tread depth of car tires: 1. Prepare a tire tread depth gauge; 2. There are six triangular symbols around the sidewall of the tire. Following the direction indicated by the arrows, you can feel multiple raised steps in the tire grooves; 3. Insert the tip of the gauge into several main treads in the same cross-section of the tire tread to measure the depth. The braking, acceleration, and steering between the tire and the ground are all achieved through the tread patterns on the tire. The tread pattern has a significant impact on the tire. The deeper the tread, the greater the elasticity generated between the tread and the ground, resulting in stronger grip.
20
1
Share

Is the Mercedes-Benz GLA an SUV?

The Mercedes-Benz GLA is an SUV, specifically a compact SUV model. The GLA is equipped with three engines: a 1.6-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The 1.6-liter turbocharged engine has a maximum power of 115 kW, a maximum torque of 250 Nm, a maximum power speed of 5,300 rpm, and a maximum torque range of 1,250 to 4,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.