What is Gravity Oil Change?

How to Clean Carbon Deposits in Cars?

Engine disassembly and cleaning is the most effective method for removing carbon deposits. In addition to engine disassembly, there are several other methods to clean carbon deposits in cars: 1. Using a fuel injection cleaner. Hang a bottle tool above the engine, pour the cleaning agent into the bottle tool, and then introduce it into the engine through a conduit to achieve the purpose of cleaning carbon deposits. If the engine has severe carbon deposits, this method may cause blockage or damage to the catalytic converter system. 2. Machine cleaning. Inject the cleaning agent into a machine, then pressurize it into the combustion chamber, allowing the cleaning agent to react with and dissolve the carbon deposits, and then extract the waste liquid. This method is quite effective for severe carbon deposits and does not require engine disassembly. Methods to reduce carbon deposit formation: 1. Use high-quality fuel. Since the main components of carbon deposits are wax and gum deposits from the fuel, the lower the gum content in the fuel, the better. Although we cannot change the quality of the fuel, we can choose to avoid adding low-quality fuel of unknown origin. 2. Avoid driving at low RPM for extended periods. If necessary, you can periodically drive at high speeds. The principle of using high-speed driving to remove carbon deposits is to increase the gas flow speed, which can remove a small portion of loosely attached carbon deposits, and to raise the combustion temperature, allowing some carbon deposits in the cylinders to be burned off.

10

4

Share

Why doesn't the oil dipstick show after adding oil to an Audi car?

Audi models do not have an oil dipstick and need to check the oil level information through the central display. How to use the oil dipstick: Before checking, prepare a tissue and find the handle of the oil dipstick in the engine compartment; pull out the oil dipstick and use the tissue to wipe off the oil stuck to the dipstick head as much as possible. At this point, you can clearly see the scale marks on the oil dipstick; insert the cleaned oil dipstick back into place, making sure to push it all the way in, and then pull it out again. Note that when pulling out the oil dipstick, pay attention to the way you hold it. You can hold it vertically, tilted, or horizontally, but not upside down, as this will cause the oil on the dipstick to flow backward, affecting the accuracy of the oil level reading; check the oil stuck to the dipstick to determine the oil level position. If the oil level is below the MIN lower limit or above the MAX upper limit, it means the engine oil needs to be topped up or there is excess oil. Precautions when using the oil dipstick: It is not recommended to check the oil dipstick when the engine is hot. This is because, while the engine is running, the oil flowing between various components has not yet returned to the oil pan, which will result in a lower oil level reading on the dipstick.

14

2

Share

How Often Should a Motorcycle Chain Be Cleaned?

Motorcycle chains should be cleaned every 2,000 to 3,000 kilometers. During use, the chain is exposed to external environmental factors, causing debris such as dirt and dust to accumulate on its surface. This necessitates cleaning; otherwise, the subsequent lubrication process cannot be properly performed. A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars that control the front wheel. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.

17

1

Share

Can You Continue Driving with a Broken Air Suspension?

You can still drive normally with a damaged air suspension, but it will no longer be able to raise or lower the vehicle. Therefore, it is recommended to repair it immediately when this issue occurs. More details about air suspension are as follows: 1. Introduction: Air suspension involves adding an airbag or creating an air chamber inside the spiral spring. By adjusting the gas in the shock-absorbing airbag or air chamber, it helps change the shock-absorbing state and stabilize the vehicle's level. Conventional suspensions have springs, while air suspensions replace springs with airbags, providing better shock absorption and improving ride comfort. Air suspension raises and lowers the vehicle by inflating and deflating the airbags. 2. Structure: The air suspension system consists of a control computer, shock absorbers, air lines, an air distributor, and an air compressor. When the air suspension is active, the air compressor works to continuously deliver air into the air lines. Based on data feedback from the vehicle height sensors, the computer controls the distributor to allocate gas to the shock absorbers of the four wheels, causing changes. 3. Airbags: The component most prone to failure in an air suspension is the airbag. If the airbag is severely worn, it may leak, rendering the air suspension unusable. If the air suspension is broken, it is advisable to have it repaired at a 4S shop, and during the repair process, always use genuine original parts.

1

Share

Why is the cold air from the JETOUR X90's air conditioner not cooling?

JETOUR X90's air conditioner not cooling may be due to insufficient refrigerant or a dirty air filter. The reasons for the air conditioner not cooling include: 1. Compressor aging or damage: The cooling function of the air conditioner mainly relies on the compressor. If the compressor belt is loose, aged, or damaged, the air conditioner will only have the blower running, which blows natural air, resulting in no cooling effect. 2. Check if the air conditioner is in recirculation mode. The outside air mode will bring high-temperature air from outside into the car. Air vents: Cold air tends to sink, so check if the air vents are set to blow upward. 3. Too much or too little refrigerant can affect cooling performance. Too much refrigerant can hinder heat dissipation, while too little can reduce cooling efficiency. Over time, dust accumulates on the filter, blocking the cold air from entering the car. If the dryer in the air conditioning system absorbs too much moisture, the refrigerant's moisture may freeze in small passages, affecting the flow of refrigerant.

19

3

Share

How to Adjust the Time on a Land Rover Range Rover?

Here are the steps to adjust the time on a Land Rover Range Rover: 1. First, start the Range Rover and press the down button on the steering wheel, which is the button below "OK." You will see the time setting page appear on the dashboard. Then, select the hour option and click "OK." Each time you reach the desired number, press "OK" and proceed to the next step. 2. In addition to adjusting the dashboard time, you can also adjust the time on the central control screen. First, start the car, then select "Settings" (setting) on the central control screen. In the menu that appears, look for "System Settings" (system-setting) and select "Clock" (clock). Follow the prompts to adjust the time on the Range Rover. Since the dashboard and LCD screen times are not synchronized, you need to adjust them separately in two steps.

20

4

Share

What is Gravity Oil Change?

How to Clean Carbon Deposits in Cars?

Why doesn't the oil dipstick show after adding oil to an Audi car?

How Often Should a Motorcycle Chain Be Cleaned?

Can You Continue Driving with a Broken Air Suspension?

Why is the cold air from the JETOUR X90's air conditioner not cooling?

How to Adjust the Time on a Land Rover Range Rover?

Does the Wuling Hongguang Mini have a convertible version?

How many driving modes does the XPeng P7 have?

Does the Teramont have a particulate filter?

What does Haval's GDIT mean?