What is Gear Shifting Vibration?

1 Answers
LoganRose
07/30/25 1:15am
The main causes of gear shifting vibration are severe engine carbon deposits and issues with the vehicle's ignition system. Severe Engine Carbon Deposits: The most common cause of gear shifting vibration is excessive dirt in the throttle body or carbon buildup in the fuel injectors. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start the engine. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes the engine to vibrate. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also lead to such symptoms.
Was this review help?
15
5
Share
More Forum Discussions

Can the Audi Q2L be started remotely?

Audi Q2L cannot be started remotely. It does not have this function. Remote engine start: Remote engine start refers to starting the engine remotely using the remote key. The principle is very simple: the vehicle starts the engine based on the signal sent by the remote key. Car air conditioning: The car air conditioning device (air-conditioning-device), commonly referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers and reducing travel fatigue.
17
3
Share

Can Plug-in Hybrid Vehicles Operate Without Charging

Plug-in hybrid vehicles can operate without being plugged in as long as there is fuel available. Principle: For hybrid vehicles, there are mainly two types: plug-in hybrids and mild hybrids. True hybrid models are plug-in hybrids. For plug-in hybrid vehicles, they function both as fuel-powered cars and electric vehicles. If not charged, they operate in fuel-powered mode. Plug-in hybrid vehicles can also run in electric mode if there is no fuel but the battery has charge. Advantages: Plug-in hybrid vehicles use electric power for propulsion, typically offering a range of around 100 kilometers. Driving in electric mode is cost-effective, making charging a more economical option.
8
4
Share

What is the tire model specification of the Changan CS55?

The tire models for the Changan CS55 are 225/60R17 and 225/55R18. It is a model under Changan Automobile, with exterior dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, a wheelbase of 2650mm, and a body structure of a 5-door, 5-seat SUV. The Changan CS55 is equipped with a 1.5T turbocharged engine, paired with a 6-speed manual transmission and a 6-speed automatic transmission, delivering a maximum horsepower of 156, a maximum power of 115 kW, a maximum power speed of 5500 rpm, and a maximum torque of 225 Nm.
17
1
Share

Should You Shift to Neutral When Stalling on a Slope?

When a car stalls on a slope, it is necessary to shift the gear to neutral and then restart the engine. Here are some remedial measures for stalling on a slope: 1. When the vehicle stalls, immediately apply the emergency brake to prevent rolling back, then shift to neutral and engage the handbrake. 2. Quickly calm down, pause for a few seconds, and think about the sequence of operations for restarting. 3. When the car body starts to shake violently, hold the clutch steady and do not move it, then slowly release the brake. If the car starts to move forward, do not lift the clutch further; if the car remains stationary, lift the clutch a bit more until the car starts to move forward.
5
4
Share

Why does the car fail to start and make abnormal noises?

Car starting failure accompanied by abnormal noises can be caused by insufficient battery power, faulty spark plugs or ignition coils, engine motor idling, or poor fuel quality. Insufficient battery power: Check the battery's power status and charge it in time, as insufficient power can reduce its service life. Faulty spark plugs or ignition coils: Inspect the condition of the spark plugs and ignition coils, and replace them if necessary. Engine motor idling: Check the working condition of the engine and transmission, and inspect whether the flywheel ring gear is slipping. Poor fuel quality: Check the fuel quality and use guaranteed-quality gasoline to minimize damage.
19
2
Share

What is the general air pressure for motorcycles in bar?

Motorcycle tire pressure is generally between 2.2 to 2.5 bar. The front tire pressure can be maintained at 2.2 bar, while the rear tire pressure can be kept at 2.5 bar. Importance of motorcycle tire pressure: Motorcycle tire pressure is extremely important during regular use. It should be measured with a dedicated pressure gauge. Insufficient tire pressure increases rolling resistance, while excessive pressure can affect the vehicle's grip and increase the risk of tire blowouts. Tire pressure adjustment: During regular use, tire pressure may vary with external temperature changes. Within the normal range, it's advisable to slightly reduce tire pressure in summer to prevent blowouts, while slightly increasing pressure in winter.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.