What is Front Wheel Camber?

1 Answers
DiFelicity
07/25/25 4:18pm
Camber is the angle of the wheel center plane relative to the vertical line of the ground. The front wheel camber can be adjusted in the following ways: 1. Check and adjust the tightness of the wheel hub bearing to meet the standard. 2. Check and replace the worn-out steering knuckle kingpin and its bushing. 3. Check and replace the steering knuckle with incorrect spindle angle. 4. If necessary, remove the front axle for deformation inspection and correction. 5. For the front wheel alignment of independent suspension, the wheel camber is adjusted by adding or removing shims between the upper arm shaft and the fixed frame as needed.
Was this review help?
8
1
Share
More Forum Discussions

What are the differences between shaft drive and chain drive?

The differences between shaft drive and chain drive are as follows: 1. Transmission efficiency varies: The mechanical efficiency of shaft drive gears exceeds 99%, while that of chains is only 95%. In other words, when the same force is applied to identical bicycles, a shaft-driven bicycle will travel farther than a chain-driven one. 2. Lifespan differs: The service life of shaft drive gears is several times longer than that of chain drives, capable of reaching hundreds of thousands of kilometers, typically requiring no maintenance for up to 10 years. In contrast, chain-driven bicycles will inevitably experience chain elongation and breakage after a period of use. 3. Lubrication environments vary: The gears of a shaft-driven bicycle are encased in a sturdy cast aluminum alloy housing, keeping the entire transmission system in a fully enclosed working environment where dirt cannot enter, and the oil and lubricant are retained without leakage. Chain-driven bicycles have exposed chains that can easily lose lubrication, even staining pants, so chains often rust when not lubricated.
16
4
Share

Why does the GL8 experience jerking and surging during low-speed acceleration?

GL8 experiencing jerking and surging during low-speed acceleration could be due to transmission issues. Common faults with this transmission include jerking during 5th to 4th gear downshift, lack of power during acceleration, no reverse gear, delayed gear engagement, inability to shift to 6th gear, reverse gear impact, engine idling, no acceleration, warning light illumination, and reports of solenoid valve or sensor faults. Introduction to the Buick GL8 model: 1. Positioning: The new-generation Buick GL8 Avenir family has body dimensions of 5219mm × 1878mm × 1799mm with a wheelbase of 3088mm. The design features include the new family-style winged chrome grille, floating roof, sculpted character lines, new rear styling, and front and rear wing-type LED lighting, showcasing elegant style. 2. Powertrain: The new-generation Buick GL8 family is equipped with General Motors' latest Smart Propulsion technology. The powertrain consists of the eighth-generation Ecotec 2.0T variable-cylinder turbocharged engine and a 9-speed HYDRA-MATIC intelligent transmission, delivering 174kW and 350Nm of robust power, with a combined fuel consumption of just 7.9L/7.8L per 100km.
6
4
Share

Musty Smell in Car on Rainy Days?

Solutions for musty smell in the car on rainy days are as follows: Method 1: Perfume Method. This method is more suitable when the odor in the car is not very severe. Sprinkle some perfume or place a bottle of perfume in the car, which not only reduces the odor but also adds a romantic touch. Method 2: Bamboo Charcoal Method. Bamboo charcoal has strong adsorption power, capable of absorbing moisture, chlorides, sulfides, formaldehyde, and other harmful substances, as well as deodorizing and purifying air and water quality. Placing a few packs in the car is an excellent deodorizing solution. Method 3: Sunlight Method. On a sunny day, park the car under the sun, set the air conditioning system to the warm air setting, turn the fan to the maximum, and leave the doors and windows fully open for more than ten minutes.
10
4
Share

How to distinguish between a one-way street and a straight lane?

One-way streets and straight lanes can be distinguished as follows: 1. The one-way street sign is a blue rectangle with a white arrow, usually found on the right side of narrow road entrances, indicating that the road allows traffic in only one direction. 2. The straight lane sign is a blue circle with a white arrow, typically located on the ground or at traffic lights, displayed on a vertical sign. More information about one-way streets and straight lanes is as follows: 1. A one-way street refers to a lane that allows traffic in only one direction. One-way street signs include left one-way, right one-way, and forward one-way. 2. Generally, at fork intersections, lanes marked with straight arrows on the ground indicate straight lanes.
11
3
Share

What brand is YEADA tires?

YEADA is the Chinese name for Yida Tires, a tire brand under Shandong Fengyuan Tire Manufacturing Co., Ltd. Here is more information about car tires: 1. Car tires support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Car tires are responsible for transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the vehicle's power, braking, and passing performance. They work together with the car suspension to mitigate the impact during driving and dampen the resulting vibrations. 3. Car tires can effectively prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
2
5
Share

How Does an Engine Work?

Engine working principle: Conversion of internal energy into mechanical energy. More information about engines is as follows: 1. An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. 2. The car engine is the device that provides power for the car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. 3. Depending on the power source, car engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.