What is Ford's largest pickup truck?

What engine does the Luxgen URX use?

The Luxgen URX engine is produced by Dongfeng Motor Group at its Hangzhou Engine Plant, making it a domestically manufactured engine. The engine model for the Luxgen URX is F18, with a maximum power of 150kW, a maximum torque of 300 Nm, and a maximum horsepower of 204. For daily maintenance of the Luxgen URX engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.

16

3

Share

Does the Roewe 350 have anti-collision beams?

The Roewe 350 is equipped with anti-collision beams, featuring front and rear steel anti-collision beams and a reinforced USD body structure, known for its strong impact resistance. Taking the 2015 Roewe 350 as an example, it is a compact car with the following dimensions: length 4521mm, width 1788mm, height 1429mm, wheelbase 2650mm, front track 1543mm, rear track 1544mm, and a curb weight of 1290kg. The 2015 Roewe 350 is powered by a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, maximum power of 80kW, maximum torque of 135Nm, and is paired with a 5-speed manual transmission.

7

3

Share

How to Fold Down the Rear Seats in Elantra?

To fold down the rear seats in the Elantra: Open the trunk lid, and you will see a handle with a seat symbol at the top of the trunk. Pull the handle to fold down the rear seats. Note that only the higher trim versions of the Elantra have foldable rear seats; the rear seats in lower trim models cannot be folded down. Taking the 2020 Elantra as an example, it is a compact car with the following dimensions: length 4610mm, width 1800mm, height 1450mm, wheelbase 2700mm, and a curb weight of 1319kg. The 2020 Elantra is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, maximum torque of 211Nm, and maximum power of 95.6kW, paired with a 7-speed dual-clutch transmission.

9

2

Share

What Are the Reasons Why a Car's Air Conditioning Sometimes Suddenly Stops Cooling?

Car air conditioning sometimes suddenly stops cooling due to the following reasons: 1. Insufficient or too little refrigerant; 2. Excessive refrigerant; 3. Loose drive belt of the car's air conditioning compressor; 4. Excessive impurities in substandard refrigerant and refrigeration oil; 5. Moisture infiltration into the refrigeration system. The usage method of the air conditioning is: 1. Turn on the AC switch; 2. Adjust the air outlet selection knob—direct the air outlet upward when cooling and downward when heating; 3. Adjust the fan speed switch; 4. Adjust the air recirculation conversion knob; 5. Adjust the temperature control knob. The maintenance methods for the air conditioning are: 1. Clean the air conditioning vents promptly; 2. Maintain the air conditioning condenser in a timely manner; 3. Clean or replace the air conditioning filter element promptly.

7

0

Share

Does the Geely Emgrand GS have tire pressure monitoring?

Geely Emgrand GS is equipped with tire pressure monitoring. The functions of tire pressure monitoring are: 1. It will promptly alert when the tire is punctured, causing rapid or slow air leakage; 2. It will issue an alarm when the tire becomes loose, leading to unbalanced friction and causing the tire temperature to reach 70 degrees Celsius, thereby preventing tire blowouts; 3. It will alert when the tire pressure falls below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing tire temperature rise and blowouts. Taking the 2020 Geely Emgrand GS as an example, it is a compact SUV with body dimensions of 4440mm in length, 1833mm in width, 1573mm in height, a wheelbase of 2700mm, and a curb weight of 1365kg.

9

3

Share

Can You Continue Driving When the EPS Light Is On?

The EPS light on indicates a malfunction in the vehicle's Electric Power Steering system. In this situation, you should safely pull over as soon as possible and have the issue diagnosed at the nearest repair shop. Unlike hydraulic power steering systems that use hydraulic pumps, lines, and steering column valve bodies, electric power steering systems directly transmit motor-generated assistance to the steering system through a reducer using pure mechanical means. The working principle of electric power steering is: when the vehicle starts, the system activates. At speeds below a certain threshold, signals are sent to the control module, which then issues commands to the servo motor based on steering wheel torque, turning direction, and vehicle speed data. The servo motor outputs corresponding torque magnitude and direction to provide steering assistance. When not steering, the ECU doesn't send torque signals to the servo motor, causing its current to approach zero.

9

2

Share

What is Ford's largest pickup truck?

What engine does the Luxgen URX use?

Does the Roewe 350 have anti-collision beams?

How to Fold Down the Rear Seats in Elantra?

What Are the Reasons Why a Car's Air Conditioning Sometimes Suddenly Stops Cooling?

Does the Geely Emgrand GS have tire pressure monitoring?

Can You Continue Driving When the EPS Light Is On?

Do You Need to Press the Clutch When Using Paddle Shifters?

What are the steps for a manual transmission car at a red light?

What are the causes of the sunroof rattling in the 2018 Sagitar?

Where in Fujian does the license plate Min K belong to?