What is Driving Test Subject Three?

1 Answers
OEmersyn
07/28/25 7:21pm
Driving Test Subject Three is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. The content of Driving Test Subject Three includes: vehicle preparation for the light simulation test, starting, driving straight, shifting gears up and down, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. Precautions for the Driving Test Subject Three: 1. Speed and gear mismatch: Avoid the mistakes of high gear at low speed and low gear at high speed during the test; 2. Deviation in straight driving: Maintain a reasonable speed and drive steadily without turning the steering wheel excessively during straight driving; 3. Parking more than 30cm from the curb: It is explicitly required in Subject Three that the distance from the curb when parking should not exceed 30cm.
Was this review help?
4
1
Share
More Forum Discussions

How to Clean Asphalt from Tires?

There are several methods to clean asphalt from tires: 1. Apply gasoline, kerosene, or engine oil to the contaminated area. After dissolution, it can be easily wiped off. 2. Rub with turpentine or benzene solution, then scrub with soapy water and rinse clean with water. 3. Use a tar remover, softening and wiping simultaneously to avoid corroding the tire. Below is relevant information about tires: 1. The main functions of tires include dry grip, hydroplaning resistance, providing comfort, reducing driving noise, impact resistance, wet grip, load capacity, handling performance, even wear, and mileage. 2. The tread primarily contacts the ground, the shoulder and sidewall provide support, and the bead contacts the rim to create a seal. 3. The internal structure of a tire consists of multiple layers of different materials, including tread patterns, cover layers, steel belts, stress-absorbing rubber strips, carcass plies, and an inner liner.
15
2
Share

What is the difference between Audi dkw and dta?

The differences between dkw and dta are as follows: In terms of maximum torque, the dkw has a maximum torque of 350 Nm, while the dta has a maximum torque of 320 Nm. In terms of maximum power, the dkw has a maximum power of 165 kW, while the dta has a maximum power of 140 kW. In terms of maximum horsepower, the dkw has a maximum horsepower of 224 PS, while the dta has a maximum horsepower of 190 PS. Both dkw and dta are sub-models of Volkswagen engines. The dkw engine is a four-cylinder, four-stroke engine that integrates advanced technologies such as direct fuel injection, turbocharging, and variable valve timing, achieving a balance between power and fuel economy with environmental protection. The dta engine is designed for the PN11 phase of China 6b emission standards, featuring an additional GPF (Gasoline Particulate Filter) in its exhaust treatment system, positioned right after the three-way catalytic converter.
7
0
Share

How Long Does It Take for Car Paint to Dry Completely in Winter?

Car paint typically takes about 1-3 days to dry completely in winter. The drying time depends on the type of paint used, mainly divided into two categories: 1. If using solid color paint commonly used for trucks, it generally takes about three days to dry completely at 25°C, and there is a strong odor after drying. 2. If higher-grade metallic or pearl paint is used, it takes approximately 24 hours to dry completely at room temperature (25°C). Additional Information: Here is some information about automotive metallic paint: 1. Metallic paint refers to a room-temperature curing coating that contains fine metal particles in the paint base. It is currently a popular type of automotive topcoat. 2. Metallic paint is suitable for surface protection on metals, wood, plastics, and building exteriors. It can also be used as a topcoat protective decoration for epoxy, polyurethane, acrylic series, and other coatings.
3
0
Share

Why does an automatic transmission car not move at idle and requires acceleration to move?

If an automatic transmission car does not move at idle without pressing the accelerator, there are two possible reasons: first, the throttle may be too dirty—check and clean the throttle (the throttle signal is the main control signal for the transmission); second, check if the transmission is too dirty, causing increased transmission resistance. Additional information: 1. Check the throttle: The car's throttle plays a crucial role. If the throttle is clogged, the vehicle's power will be affected. It is the key component that allows air to enter the engine, enabling gasoline and air to mix and burn efficiently. The cleanliness of the throttle directly determines the accuracy and smoothness of engine air intake. A dirty throttle can cause engine idle shaking, stalling, frequent jerking while driving, and significantly increased fuel consumption. Most importantly, it can damage the engine or even cause it to stop working. 2. Clean the throttle: There are two methods for cleaning the throttle—removal cleaning and non-removal cleaning. Removal cleaning involves taking it off and using a specialized cleaning agent, which is effective but more costly. Non-removal cleaning involves spraying a dedicated foam cleaner on the throttle, reducing disassembly time and avoiding damage to the vehicle.
2
2
Share

Why Can't the BMW Z4 Convertible Top Open?

The reasons and solutions for the convertible top not opening are as follows: 1. The motor controlling the convertible system has malfunctioned, which could be due to wiring issues or a dead battery. Solution: Take the car to a repair shop promptly for professional inspection to avoid unnecessary trouble during use. 2. There might be foreign objects blocking the convertible's operating track, preventing the top from opening. Solution: Simply clean the track in a timely manner. 3. For older vehicles, aging parts may also cause the convertible top to malfunction. Solution: Lubricate or replace the convertible parts promptly. Additional information: As of November 2019, convertible cars on the market are divided into hardtop and soft-top convertibles, each with its pros and cons: 1. Hardtop Convertible: Hardtop convertibles have a more rigid roof structure, providing better safety in rollovers and improved aerodynamics when the top is closed. However, they have smaller trunk space, are heavier, and consume more fuel. 2. Soft-top Convertible: Soft-top convertibles have a simpler structure, are less prone to damage, and take up less trunk space. However, their roofs offer less support, which can compromise passenger safety in rollovers.
16
1
Share

Where is the sunroof switch symbol located in a car?

The sunroof switch symbol is located at the front of the sunroof, near the windshield. Below is relevant information about car sunroofs: 1. Sunroof classification: Sunroofs are divided into panoramic sunroofs and regular sunroofs. The opening methods of sunroofs can be categorized into two types: rear-tilt style and rear-slide style. Car sunroofs can be broadly classified into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type, mainly used in sedans and commercial vehicles. 2. Sunroof function: Sunroofs effectively facilitate air circulation inside the vehicle, increasing fresh air intake while providing passengers with a sufficiently wide field of vision. 3. Operation method: Below the car sunroof there is a freely movable sunshade that can manually adjust light intensity when the sunroof is closed. When the car is powered on, the sunroof can be opened or closed by pressing and holding the open or close switch. Pressing and holding the tilt or tilt up button will raise the rear of the sunroof.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.