What is Covered for Free During the Car Warranty Period?

1 Answers
AdalineLee
07/29/25 2:41pm
During the car warranty period, free coverage mainly applies to the core components of the vehicle, such as the engine, transmission, drivetrain, and chassis. However, the likelihood of failure in these components is relatively low, and the repair costs are high. Over five years, car owners rarely encounter issues with these core parts. Here are the details: 1. Concept: The car warranty period refers to the timeframe during which the car manufacturer promises to provide free repairs and maintenance for faults arising from quality issues when selling the product to consumers. 2. Conditions: Most car manufacturers now implement a new vehicle warranty period, 'two years or 60,000 kilometers, whichever comes first.' This means there are two conditions for the warranty period: one is a time limit of two years, and the other is a mileage limit of 60,000 kilometers. Once either of these conditions is met, the vehicle's warranty period is considered expired, and any subsequent normal maintenance or repairs will no longer be covered for free.
Was this review help?
14
2
Share
More Forum Discussions

Which type of engine oil is suitable for the Lynk & Co 03?

The Lynk & Co 03 uses fully synthetic engine oil with a viscosity grade of 0W-20. The Lynk & Co 03 is a compact sedan launched by Lynk & Co. In terms of power, this model is equipped with either a 1.5T or 2.0T turbocharged engine. Turbocharged engines require higher-performance engine oil for better protection. Here is more detailed information about this vehicle: 1. In terms of power, the Lynk & Co 03 is powered by the Drive-E series 1.5TD high-efficiency engine. The turbo kicks in at 1000 rpm, delivering 150 N·m of torque. At 1500 rpm, the engine reaches its peak torque of 265 N·m. The turbo responds quickly, providing fast low-speed response, making hill climbing and overtaking easier. The 0-100 km/h acceleration time is just 7.9 seconds. 2. The Lynk & Co 03 2.0TD is equipped with Volvo's Drive-E 2.0TD series engine, with a maximum power output of 140 kW (190 PS) and a peak torque of 300 N·m, paired with a 6-speed automatic transmission.
20
4
Share

How to Raise Car Seats?

There are two main methods to adjust the height of car seats: 1. Electric seats, which are adjusted via buttons, and 2. Manual seats, which are adjusted using a lever. Below are the relevant details: 1. Location of electric seat adjustment buttons: Electric seats are typically found in higher-end B-segment sedans. The buttons for adjusting the seat are located on the side of the seat, allowing the driver to adjust the height or forward/backward position. The height should be adjusted according to the driver's stature, ensuring there is at least a fist's worth of headroom and maintaining a clear field of vision. 2. Purpose of adjustment: This is to prevent the driver's head from hitting the roof on bumpy roads. Adjusting the height of manual seats is more cumbersome, requiring the driver to manually operate a lever. 3. Adjustment considerations: When adjusting the seat, it's not just about height but also the forward/backward position. The seat should be adjusted to the driver's optimal driving position—neither too far nor too close. If adjusted too far, the driver may not be able to brake promptly. If adjusted too close, the driver's body will be uncomfortably close to the steering wheel and may hinder ease of control.
20
3
Share

What are the major maintenance items for the Passat?

Passat's major maintenance is performed at 60,000 kilometers, with main items including replacement of engine oil, oil filter, cabin air filter, fuel filter, air filter, transmission fluid, brake fluid, spark plugs, and other related components. Below are the scope and purpose of automotive maintenance: Scope of automotive maintenance: Modern automotive maintenance mainly includes the maintenance of engine systems (engine), transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, etc. Purpose of automotive maintenance: The purpose of automotive maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate hidden dangers to prevent failures, slow down the deterioration process, and extend the service life.
4
3
Share

Where is the reversing camera trigger switch for Emgrand?

The reversing camera of Emgrand can be triggered simply by shifting into P gear. Below are the specific reasons why the reversing camera of Geely Emgrand may not display: Issue with the trigger switch: The trigger switch may not work due to poor contact or other faults, resulting in the reversing camera system not being activated. Camera malfunction: If the camera is faulty, the only solution is to replace the reversing camera. Wiring problems: Wiring issues are the most common cause of failure. Since the wiring harness for the reversing camera runs from the dashboard all the way to the trunk, the long route increases the likelihood of poor contact at some point along the harness or connectors, requiring careful inspection.
10
4
Share

What does L4 mean?

L4 refers to a standard inline 4-cylinder engine. The majority of small-displacement vehicles are equipped with L4 engines, and such cars are the most common, including models like Jetta, Santana, and Besturn. Generally, cylinder blocks can be categorized into the following three types: 1. General-type cylinder block: Its characteristic is that the oil pan mounting plane and the crankshaft rotation center are at the same height. The advantages of this cylinder block are its small body height, light weight, compact structure, ease of processing, and convenient crankshaft installation and removal. However, its disadvantage is relatively poor rigidity and strength. 2. Raised-type cylinder block: Its characteristic is that the oil pan mounting plane is lower than the crankshaft rotation center. Its advantages are good strength and rigidity, capable of withstanding greater mechanical loads. However, its disadvantages include poorer manufacturability, a bulky structure, and more difficult processing. 3. Tunnel-type cylinder block: In this type, the main bearing holes for the crankshaft are integral, using rolling bearings, with larger main bearing holes, and the crankshaft is installed from the rear of the cylinder block. Its advantages are a compact structure, good rigidity and strength, but its disadvantages include high precision requirements for processing, poorer manufacturability, and inconvenient crankshaft installation and removal.
20
2
Share

How Long Does It Take to Get the License After Passing Subject 4?

After passing Subject 4, you can receive the license on-site, usually within about 2 hours. Subject 4, also known as the Subject 4 theoretical test or driver's theoretical test, is part of the motor vehicle driver's license examination. The main content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-traffic accident handling knowledge. The Subject 4 test consists of 50 questions, presented in the form of case studies, images, animations, etc. The total score is 100, with a passing score of 90. After the implementation of the Ministry of Public Security's Order No. 123, Subject 3 was divided into two parts: the road test and the addition of a safety and common sense test, commonly known as "Subject 4," which assesses "driving ethics." Since this test is conducted after Subject 3, it is commonly referred to as Subject 4. Officially, there is no such term as Subject 4. Before the test, students can study traffic regulations through driver simulation test software on mobile or computer devices.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.