What is Car Coolant?

What is the power of a tower crane?

QTZ40 tower crane: The power is 24.3KW. Below is relevant information about tower cranes: 1. Concept: The tower crane, also known as a "tower hoist," is the most commonly used lifting equipment on construction sites. It is assembled in sections (called "standard sections") to lift construction materials such as steel bars, wooden formwork, concrete, and steel pipes. Tower cranes are indispensable equipment on construction sites. 2. Working principle: The lifting mechanism is placed at the end of the counter-jib along with the counterweight. This arrangement serves two purposes: first, it acts as partial counterbalance, and second, it increases the distance between the rope drum and the tower top pulley, facilitating the smooth winding of the wire rope and preventing tangling. The amount of counterweight is inversely proportional to the length of the counter-jib, while the length of the counter-jib has a proportional relationship with the length of the jib. The counterweight is quite substantial, with light-duty tower cranes typically requiring at least 3–4 tons, and heavy-duty ones needing up to nearly 30 tons.

19

5

Share

Why is the Infiniti steering wheel so heavy?

Infiniti steering wheel is heavy for the following reasons: 1. Insufficient power steering fluid: Power steering fluid is the main power source for driving the car, so when the power steering fluid is insufficient, the car will naturally be difficult to drive, let alone turn and change direction. 2. Contaminated power steering fluid: If the car has difficulty turning the steering wheel when changing direction, it may be due to unclean mixed gas or impurities in the power steering fluid, which prevents the fluid from functioning normally and driving the car. 3. Power steering system failure: The steering wheel and the power steering system are closely related. When the steering wheel becomes heavy, it indicates poor internal circuit contact in the power steering system.

5

4

Share

What should you do when the chosen meeting position before encountering another vehicle is not ideal?

When the chosen meeting position before encountering another vehicle is not ideal, you should slow down, pass at a low speed, or stop to yield. More information about the Subject 1 test is as follows: 1. The Subject 1 test can be taken twice a day: If you fail the first test, you can apply for a retake immediately. Some places require a score of 85 or above to apply for an on-the-spot retake. If you still fail the retake, the test will be terminated, and you can schedule another test after 10 working days, paying a retake fee. Normally, there is no limit to the number of times you can schedule the Subject 1 test, meaning you can take it as many times as needed. 2. Nowadays, driving schools handle the test registration process: Students do not need to schedule the test themselves. The prerequisite for a successful Subject 1 test reservation is having sufficient study hours. Driving schools that handle the process will help students log study hours; otherwise, students must watch videos on an online platform to accumulate study hours themselves. You will receive an SMS notification once the test reservation is successful. If you want to reschedule, you can communicate with the driving school. You can cancel the test online up to two days before the scheduled test date, but if you want to cancel within two days of the test date, you must apply in person at the vehicle management office.

20

1

Share

What are the techniques for shifting gears without depressing the clutch in a car?

There are two main techniques for shifting gears without depressing the clutch in a car. Below is a detailed introduction to these two techniques: 1. Try to increase the engine speed before shifting: When the vehicle speed is high, the transmission gear speed is slightly higher than the engine speed, and the transmission's driving gear and driven gear are in a "meshing" state. At this time, it is possible to shift gears without depressing the clutch. 2. Quickly move the gear lever to a higher gear: When the engine speed and transmission speed are exactly the same, the gear lever can be switched to a higher gear. Meanwhile, shifting without depressing the clutch consumes more fuel, but the shifting speed is faster, and the vehicle has more power.

19

2

Share

What is the body length of the Chery Arrizo 5 PLUS?

The body length of the Chery Arrizo 5 PLUS is 4680mm. Here are the specific details about the Chery Arrizo 5 PLUS: 1. Body dimensions: The Chery Arrizo 5 PLUS is a compact sedan under the Chery brand, with dimensions of 4680mm in length, 1825mm in width, 1490mm in height, and a wheelbase of 2670mm. 2. Powertrain configuration: The Chery Arrizo 5 PLUS is equipped with a 1.5L naturally aspirated engine and a 1.5L turbocharged engine. The 1.5L naturally aspirated engine delivers 116 horsepower and a maximum torque of 143 N·m, with a maximum power output at 6150 rpm and peak torque available between 4000 rpm. This engine is paired with either a 5-speed manual transmission or a CVT transmission. The 1.5L turbocharged engine produces 156 horsepower and a maximum torque of 230 N·m, achieving maximum power at 5500 rpm and peak torque between 1750 to 4000 rpm. This engine is also paired with either a 5-speed manual transmission or a CVT transmission.

8

5

Share

Is the manual-automatic transmission CVT or AT?

Both CVT and AT can achieve manual-automatic transmission. Here is the relevant introduction about manual-automatic transmission: 1. Advantages: Mature technology - AT transmission is the most widely used and popular transmission in the market today. Its mature mechanical structure has been inherited, developed, and enhanced by many manufacturers. Good reliability - Traditional hydraulic automatic transmissions use torque converters, which can cushion the engine's power impact and, combined with planetary gears, ensure stable performance. 2. Disadvantages: Low transmission efficiency and high fuel consumption - Since the engine power needs to pass through the torque converter (or multi-plate clutch, etc.) to reach the gear set, part of the engine power is wasted. Therefore, compared to manual transmissions (including CVT transmissions), AT transmissions consume more fuel.

20

5

Share

What is Car Coolant?

What is the power of a tower crane?

Why is the Infiniti steering wheel so heavy?

What should you do when the chosen meeting position before encountering another vehicle is not ideal?

What are the techniques for shifting gears without depressing the clutch in a car?

What is the body length of the Chery Arrizo 5 PLUS?

Is the manual-automatic transmission CVT or AT?

Is a tire pressure of 245 normal?

Should I choose the Luxury Package or the Sport Package for the BMW X3?

What is the real fuel consumption of the Eado Blue Whale Edition 1.4t?

Is 15 liters per 100 kilometers high for car fuel consumption?