What is C1?

1 Answers
McLiam
07/29/25 7:16pm
C1 driver's license is one of the codes for motor vehicle driving licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. The application age requirements are as follows: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. The permitted vehicle types are as follows: The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Vehicles that cannot be driven with a C1 license include: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
4
3
Share
More Forum Discussions

How to Check Tire Pressure in the 2021 Bora?

2021 Bora allows you to check tire pressure through the tire pressure option in the vehicle's central control screen settings menu. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts when tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of the actual pressure in all four tires like a direct system.
8
4
Share

Where is the car computer board located in a vehicle?

The onboard computer in a vehicle, also known as the engine control unit (ECU), is essentially a computer control module that processes simple electronic signals and performs basic calculations using logic gates and integrated circuit principles. Below is relevant information: 1. Specific details: It receives data from various sensors throughout the vehicle, processes this information through the computer control module, and then sends signals to the engine to control its operation (including functions like fuel injection systems and ignition timing). Typically, the onboard computer is installed either beneath the dashboard on the driver's side or near the wiper linkage. 2. Two installation methods: Factory-installed refers to computers that come as standard equipment when the vehicle is manufactured, usually with displays embedded in the control panel. Aftermarket installation refers to computers purchased and installed by the owner after purchasing the vehicle. Currently, there are some manufacturers in the domestic market that provide modification platforms.
10
4
Share

What causes the power relay failure in Haval H6?

Haval H6 power relay failure manifests in the following ways: 1. Insufficient power supply: Power failure due to severely depleted battery or sulfated/short-circuited battery plates, poor contact between battery terminals and cable clamps, or loose connections in the starting circuit. 2. Short circuit: Poor contact between commutator and brushes, open or short circuits in field windings or armature windings, grounded insulation brushes, or open/short circuits/grounding in solenoid switch coils along with contact burning. 3. Ignition failure: Faulty ignition switch with loose wiring or internal poor contact. Starting system circuit issues including open circuits, poor wire connections, or disconnections in the starting circuit.
8
2
Share

What is the torque specification for the cylinder head bolts on the LaCrosse 2.4?

The torque specification for the cylinder head bolts on the LaCrosse 2.4 is 12 kg. Below are the detailed specifications for the Buick LaCrosse: 1. Dimensions: The LaCrosse is a mid-size 4-door, 5-seater sedan under SAIC-GM-Buick, with a length of 5000mm, width of 1858mm, height of 1497mm, and a wheelbase of 2837mm. 2. Powertrain: The LaCrosse 2.4's engine delivers a maximum power of 137 kW at 6200 rpm, with a peak torque of 240 Nm, achieving a top speed of 205 km/h, paired with a 6-speed automatic transmission. 3. Suspension: It features 225/55R17 tires, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
14
2
Share

What is the wheel size of the Camry 2.5?

The Camry 2.5 comes with 16-inch wheels. Here are the specific details about the Camry: 1. Vehicle Positioning: The Camry is positioned as a mid-size sedan, with body dimensions of 4885×1840×1455mm and a wheelbase of 2825mm. 2. Powertrain: It is equipped with a 2.5L Dynamic-Force Engine, delivering a maximum output power of 154kw and a maximum torque of 250Nm, paired with a Direct-Shift 8-speed automatic transmission. 3. Features: The Camry is equipped with Toyota Safety Sense, including Pre-Collision System (PCS), Lane Departure Alert (LDA), Automatic High Beam (AHB), and Dynamic Radar Cruise Control (DRCC). Additionally, it features 12 various sensors to monitor the driving environment, such as Blind Spot Monitor (BSM), Rear Cross-Traffic Alert, and Panoramic View Monitor (PVM).
12
5
Share

What is an airbag inflator?

An airbag inflator is a device located inside the airbag. Airbags are equipped with inflators of different specifications. During a vehicle collision, the inflator fills the airbag with gas, causing it to deploy and protect the passengers. Below is relevant information: 1. SRS Airbag: The electronic airbag system is a passive safety (see vehicle safety performance) protection system. When used in conjunction with seat belts, it provides effective collision protection for occupants. In the event of a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%. 2. Overview: It is an auxiliary protective device in the airbag system, made of special nylon fabric with a rubber lining and filled with harmless helium gas during operation. During a collision, it takes about 0.03 seconds for the airbag to inflate. This extremely rapid inflation ensures that the airbag is in place in time when the passenger's body is restrained by the seat belt while the head continues to move forward.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.