···
Log in / Register

What is behind the front bumper of the Wildlander?

5 Answers
DelEmmanuel
09/01/25 2:21am

The component behind the front bumper of the Wildlander is called the front bumper lower shield, and slightly further back is the engine underguard. Function of the lower shield: To reduce the lift generated during high-speed driving, automotive designers have not only improved the car's exterior design but also installed a downward-sloping connecting panel below the front bumper. This panel integrates with the front skirt of the vehicle body, featuring appropriately sized air inlets to increase airflow and reduce underbody air pressure. Bumper protection methods: Use corner indicator posts to determine the bumper's position. The vertical markers at the bumper corners are indicator posts, helping to accurately identify the bumper's corner locations, prevent bumper damage, and enhance driving skills.

Was this review help?
11
1
Share
LaAdalynn
09/13/25 5:18am

As a Wildlander owner myself, I've been driving it for nearly three years, mostly in urban areas and on highways. There's quite a bit hidden behind the front bumper, primarily serving protective functions. There's the crash beam, a metal structure that absorbs collision impacts to safeguard the engine and passenger compartment. Then there's the radiator, resembling a large water tank, which helps cool the engine and prevent overheating; the fan is right beside it, spinning to blow air when the AC is on. During maintenance, I often inspect this area to ensure the cooling fins aren't clogged with dust, as that could affect fuel efficiency and AC performance. Once, after a minor accident where the front bumper was hit, upon disassembly, I found the crash beam intact without deformation, protecting the core internal components. Wiring harnesses also connect to sensors used for driver-assist features like forward collision warning. Overall, the design is practical and safe, giving me peace of mind while driving.

Was this review help?
2
4
Share
Expand All
VonMaya
09/13/25 5:20am

As an ordinary person who enjoys DIY car repairs, I'm quite familiar with the components behind the Wilanda's front bumper. There's the radiator and fan—the radiator helps dissipate heat, while the fan assists the air conditioning system. I've personally cleaned their blades to prevent dust buildup that could cause overheating. The crash beam is another crucial part, extremely sturdy, designed to absorb impact forces during collisions. I've checked the wiring connected to the radar system, which supports the automatic braking function. For maintenance, I regularly inspect the area behind the bumper for any damage to prevent leaks or other issues. The actual operation is straightforward as long as you have the right tools. I've even replaced bumper bulbs myself to ensure clear visibility during night driving. This area features a compact design, and proper maintenance can extend the vehicle's lifespan. DIY repairs save money and bring a sense of accomplishment.

Was this review help?
14
0
Share
Expand All
Avery
10/27/25 6:05am

The design behind the front bumper of the Wildlander reflects the vehicle's safety. It mainly includes an anti-collision beam, which absorbs energy during impacts to protect passengers. The radiator is responsible for engine cooling, preventing overheating damage. The fan assists in heat dissipation and automatically activates when the air conditioning is in operation. Radar sensors are integrated into the wiring harness for active safety systems such as pedestrian detection. Toyota engineers have arranged the components efficiently to ensure they work in synergy. The vehicle operates smoothly and reliably, providing a more reassuring driving experience.

Was this review help?
6
2
Share
Expand All
Marlene
12/10/25 6:21am

Safety is paramount while driving, and the structure behind the front bumper of the Wildlander contributes significantly to this. The anti-collision beam can withstand impacts and reduce accident injuries. The radiator maintains stable engine temperature to prevent malfunctions. The fan and condenser components control the air conditioning's cooling efficiency. Regular maintenance of these parts is crucial, such as checking the cleanliness of the radiator fins and preventing wiring aging. During high-speed driving, they ensure vehicle reliability. I always pay attention to the condition of the front section to prevent minor issues from turning into major failures. The radar system provides additional protection, with automatic braking reducing collision risks. The overall design makes driving more stable.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

What is the 0-100 km/h acceleration time of the Haval M6?

Haval M6's 0-100 km/h acceleration time is 12.96 seconds, which demonstrates remarkably strong power performance compared to other vehicles in its class. The 0-100 km/h acceleration refers to the time taken to accelerate from standstill to 100 kilometers per hour, serving as an intuitive indicator of a car's power. Typically, 1.6L compact sedans achieve 0-100 km/h acceleration times between 11 to 13 seconds, while 2.0T midsize sedans range from 7 to 8 seconds, and supercars mostly complete this acceleration in under 3.8 seconds. The Haval M6 is a compact SUV under the Haval brand, positioned as a value-for-money family vehicle. It is equipped with a 1.5T turbocharged engine across all variants, complying with the China VI emission standards, delivering a maximum power of 110 kW and a peak torque of 210 Nm. The transmission system is paired with either a 6-speed manual or a 7-speed wet dual-clutch gearbox.
6
1
Share

What is the solution for H4 headlights not focusing light?

H4 single-installation xenon lights have the biggest issues of light scattering and slow flickering. The solution is to install a lens. The structure of H4 model headlights combines high and low beams in one reflector bowl, which has two focal points. Replacing with xenon lights makes it difficult to align both focal points simultaneously, resulting in scattered light after modification for some vehicles. Here are specific details about H4 model headlights: 1. H4 headlights are a type of automotive headlight bulb specification and model. H4 is a dual-filament, three-pin bulb with both low and high beams in one bulb, typically rated at 55W for low beam and 60W for high beam; or 90W for low beam and 100W for high beam. 2. The performance of these headlights is relatively poor. The reflector bowl is too large, causing the emitted light to scatter excessively and not focus well. If modified with xenon or LED lights, the effect is comparatively worse with severe divergence, which can dazzle oncoming vehicles.
4
1
Share

How many liters of engine oil should be added for the Toyota Land Cruiser 4.0?

The Land Cruiser 4.0 requires 6 liters of engine oil. Below is relevant information about the Land Cruiser: 1. Introduction: The Land Cruiser is the LAND-CRUISER 200 produced by Toyota, an imported ORV off-road vehicle manufactured by Toyota. While inheriting the original design DNA, its appearance evolves towards a style with a "freshness and advancement" of the new era. It is a hardcore off-road vehicle with four-wheel drive, a wheelbase of 2850 mm, and four-wheel disc brakes. 2. Configuration: The Land Cruiser employs the latest technologies and features such as the Crawl Control low-speed cruise driving assist system, KDSS kinetic dynamic suspension system, HAC hill-start assist control system, and the adoption of the VVT-i system. These enhancements not only improve durability, reliability, and off-road performance but also achieve a higher sense of luxury and quality, truly making it a world-class SUV.
9
4
Share

Can a swollen battery still be recycled?

Once a battery is swollen, it is considered scrapped, and merchants will not attempt to repair it. Trade-in programs essentially recycle the lead and plastic at a discounted rate, regardless of the battery's condition. A swollen battery cannot and should not be repaired; it is recommended to replace it directly. This is because a swollen battery is prone to reverse polarity—where the positive terminal becomes negative and the negative terminal becomes positive—which can cause the charger to burn out and damage the controller. In the worst-case scenario, if the controller and charger lack comprehensive protection features, it could even lead to a vehicle fire. Battery swelling is one of the common causes of battery failure, typically manifesting as bulging on both sides. The primary reasons for swelling are excessive charging or discharging currents, leading to rapid temperature increases inside the battery. If the gas cannot vent in time, the pressure builds up until the battery swells or deforms. Upon discovering a swollen battery, prompt repair or replacement is necessary. During maintenance, it is crucial to inspect the charging system to ensure the charging voltage and current are within reasonable limits and that the generator and charging circuits are functioning properly.
2
3
Share

Deduction Criteria for Designated Starting Point

Deduction criteria for designated starting point: 1. Scoring standards for hill parking: After parking, if the right side of the vehicle is more than 30 cm away from the roadside line, 10 points will be deducted; if it is more than 50 cm away, 100 points will be deducted; crossing or touching the line will result in a 100-point deduction. If the front bumper is not aligned with the pole line after parking, and the deviation is within 50 cm, 10 points will be deducted; if the deviation exceeds 50 cm, 100 points will be deducted. Failing to fully engage the parking brake will result in a 10-point deduction. 2. Scoring standards for hill starting: Failing to start within 30 seconds will result in a 100-point deduction; stalling once during starting will deduct 10 points; if the gear is not in neutral or park when starting the engine, 100 points will be deducted. If the vehicle rolls back less than 30 cm during starting, 10 points will be deducted; if it rolls back more than 30 cm, 100 points will be deducted.
12
0
Share

What is the emission standard for 2009 cars?

2009 cars comply with the China IV emission standard. Below is relevant information about the China IV standard: 1. Introduction: The China IV emission standard is the national fourth-stage motor vehicle pollutant emission standard. Automobile emissions mainly include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), PM (particulate matter), etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it controls and reduces vehicle emissions to below specified limits. 2. Implementation timeline: In March 2009, the Industrial Policy Department of the Ministry of Industry and Information Technology convened a meeting with relevant enterprises to discuss the implementation of automobile emission standards (China III, China IV, China V), attended by major automotive manufacturers and engine producers. On December 21, 2010, the General Office of the Ministry of Environmental Protection of the People's Republic of China officially replied to the China Association of Automobile Manufacturers with the document Huan Ban Han [2010] No. 1390 "Reply Letter Regarding the Implementation Date of National Motor Vehicle Emission Standard Phase IV Limits".
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.