What is Automotive Voice Control?

How to Determine Which National Emission Standard a Vehicle Belongs To?

Knowing which national emission standard a vehicle belongs to can be done through the following methods: 1. Check the vehicle's environmental protection label, which has clear markings on the back; 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center to inquire; 3. Take the vehicle registration certificate to the vehicle management office for inquiry; 4. Refer to the vehicle's factory certificate for details. Emission standards refer to the national standards for motor vehicle pollutant emissions, which regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. These standards are categorized by letters: National I, National II, National III, National IV, National V, and National VI.

1

Share

What is the tire specification for the 2015 V3 Lingyue?

2015 V3 Lingyue tire specifications are 185/60R15 and 185/65R14. Taking 185/60R15 as an example, 185 indicates the tire width is 185mm, 60 represents the aspect ratio, R stands for radial tire, and 15 means the tire can be mounted on a 15-inch rim. The 2015 V3 Lingyue features a four-door, five-seater sedan body structure with dimensions of 4420mm in length, 1700mm in width, and 1415mm in height. It has a wheelbase of 2500mm, front track of 1460mm, rear track of 1465mm, a fuel tank capacity of 50 liters, trunk capacity of 420 liters, and a curb weight of 1100kg.

3

1

Share

Must engine oil be changed after exceeding one year?

Engine oil exceeding one year does not necessarily require immediate replacement and can still be used temporarily. However, it is essential to promptly visit a qualified maintenance facility to replace both the engine oil and oil filter. This prevents the degradation of the oil's lubrication, cooling, sealing, and cleaning functions, which could otherwise lead to engine damage. Engine oil consists of base oil and additives, with the base oil being the primary component that determines the fundamental properties of the lubricant. The steps for changing engine oil are as follows: 1. Lift the vehicle, remove the undercover, and place a container beneath the drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and use a funnel to add new oil through the filler port.

15

2

Share

Where is the Cabin Air Filter Located in a Mazda 3?

The cabin air filter in a Mazda 3 is located inside the glove compartment on the passenger side. The replacement procedure is as follows: 1. Access the glove compartment; 2. Remove the glove compartment clips; 3. Press down and squeeze the glove compartment to remove it; 4. Open the cover of the cabin air filter; 5. Pull out the old cabin air filter; 6. Install a new cabin air filter. Taking the 2020 Mazda 3 as an example, it belongs to the compact car category with body dimensions of: length 4662mm, width 1797mm, height 1445mm, wheelbase 2726mm, and a fuel tank capacity of 50 liters. The 2020 Mazda 3 is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 117PS, maximum power of 86kW, maximum torque of 148Nm, paired with a 6-speed manual transmission.

8

3

Share

What is the method to reset the maintenance reminder for the Ford Kuga?

Ford Kuga maintenance reminder reset method is: 1. Connect the external control computer to the vehicle's onboard computer; 2. Select the engine option on the external computer operation interface; 3. Choose the matching function and enter the function module; 4. The control module will prompt to accept the request and update the read data; 5. On the pop-up interface, select the maximum maintenance time value and modify the stored data to new data; 6. Click confirm to modify to new data. Taking the 2019 Ford Kuga as an example, it is a compact SUV with body dimensions of: length 4524mm, width 1838mm, height 1685mm, wheelbase 2690mm, front track 1563mm, rear track 1565mm, fuel tank capacity 60l, and body weight 1592kg.

10

4

Share

What brand of transmission is used in the Envision?

The transmission brand used in the Envision is SAIC-GM. SAIC General Motors Co., Ltd., established on June 12, 1997, is a joint venture between SAIC Motor Corporation Limited and General Motors Company. It has four major production bases located in Pudong Jinqiao, Yantai Dongyue, Shenyang Beisheng, and Wuhan Branch, comprising a total of four vehicle production plants and two powertrain plants, making it one of the important enterprises in China's automotive industry. The Envision is equipped with two types of transmissions: a 7-speed dual-clutch transmission and a 9-speed automatic transmission (9AT). The 1.5-liter turbocharged engine is paired with the 7-speed dual-clutch transmission, while the 2.0-liter turbocharged engine is matched with the 9AT. Dual-clutch transmissions are currently very popular, favored by many automakers and consumers alike. The structure of a dual-clutch transmission is similar to that of a manual transmission, with the only difference being the addition of an extra clutch and a shift control mechanism. Dual-clutch transmissions offer fast shifting speeds and high transmission efficiency, making them particularly suitable for use with small-displacement turbocharged engines. When using the Envision's transmission in daily driving, the following points should be noted: Do not delay transmission fluid changes for extended periods. Although many modern vehicles come with maintenance-free transmission fluid, 'maintenance-free' does not mean 'never change.' Prolonged failure to replace the transmission fluid can lead to damage to internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and may result in a noticeable jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming to demonstrate 'smooth' operation, may shift into reverse while the vehicle is still moving, which can cause significant damage to the transmission gears and, over time, lead to gear grinding or other failures. Do not frequently climb steep slopes in Drive (D) mode. When navigating steep inclines, automatic transmission vehicles can overheat due to high load or may upshift too early, resulting in insufficient power. In such cases, it is advisable to use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in Neutral (N) and placed onto the tow platform. Towing with a rope or directly dragging the vehicle should be avoided.

11

2

Share

What is Automotive Voice Control?

How to Determine Which National Emission Standard a Vehicle Belongs To?

What is the tire specification for the 2015 V3 Lingyue?

Must engine oil be changed after exceeding one year?

Where is the Cabin Air Filter Located in a Mazda 3?

What is the method to reset the maintenance reminder for the Ford Kuga?

What brand of transmission is used in the Envision?

How to reset the tire pressure light on the Atenza?

Which country does Ferrari belong to?

What to Do When the Hyundai One-Button Start Doesn't Respond?

What Size Tires Fit 16-Inch Rims?