What is automotive paint composed of?

Can the daytime running lights of the Langdong be turned off?

The daytime running lights of the Langdong cannot be turned off. Daytime running lights are not meant for illuminating the road for the driver but rather to signal the presence of the vehicle to others, falling under the category of signal lights. Introduction to Daytime Running Lights: Daytime running lights, also known as daytime running lamps, are installed on the front sides of the vehicle to signal its presence during the day. Function of Daytime Running Lights: The primary purpose of daytime running lights is not aesthetic but to enhance the vehicle's visibility. Studies abroad have shown that using daytime running lights can reduce vehicle accidents by 12.4% and lower the fatality rate in accidents by 26.4%. In summary, the goal of daytime running lights is to improve traffic safety.

18

4

Share

What to Do If the ETC Expressway Card Is Lost?

ETC Expressway Card Loss Replacement Method: The vehicle owner should bring their ID card, original vehicle registration certificate, and copies to the bank counter to handle the card change or replacement service. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. ETC Device Activation Method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth directly. Turn on the phone's Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.

9

4

Share

Can I continue if I got 10 questions wrong in the Subject 1 test?

If you got 10 questions wrong in the Subject 1 test, you can still continue because there is still a possibility of passing with 90 points. However, if you get one more question wrong, you will fail directly. The Subject 1 test consists of 100 questions, including true/false and single-choice questions, with a full score of 100 points and a passing score of 90. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". The test content includes the most basic knowledge such as driving theory, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. Test process: Follow the instructions of the staff and receive your personal driving training file in order in the waiting room; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the test area; No loud noises are allowed in the test area; Regulation textbooks are not allowed in the examination room (or must be kept in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the examination room; Students who pass the test will leave the examination room after signing under the guidance of the staff at the exit; Students who fail the test can leave the examination room and wait for the driving school staff to notify them of the retake time.

17

0

Share

What is the cause of the Honda CR-V B1129 fault code?

Honda CR-V B1129 fault code indicates a driver's side door lock button switch signal malfunction. Introduction to automotive fault codes: Automotive fault codes are error codes generated by the vehicle's ECU (Engine Control Unit) after analyzing malfunctions. Most fault codes are caused by sensor failures or poor sensor performance, though some mechanical faults cannot be detected by the ECU. Common automotive fault codes and their causes: P0107: Manifold Absolute Pressure (MAP) sensor input voltage too low; P0108: MAP sensor input voltage too high; P0109: Intake Air Temperature (IAT) sensor circuit malfunction or intermittent MAP sensor circuit malfunction; P0110: IAT sensor circuit intermittent malfunction.

3

1

Share

How Much Horsepower Can Be Increased by Flashing the Lynk & Co 03's ECU?

Flashing the Stage 1 ECU program on the Lynk & Co 03+ can increase horsepower by 30 to 40. Below is a detailed introduction to the Stage 1 program: Function of the Stage 1 Program: The Stage 1 ECU flash adjusts parameters such as fuel injection or ignition timing within the tolerance range of the original factory components without modifying other hardware. Its purpose is to address minor vibration issues in first and second gears for some small-displacement vehicles. Precautions for Flashing the Stage 1 Program: It is essential to visit a professional maintenance facility for the Stage 1 ECU flash, as the process carries significant risks. Any errors during the procedure could potentially lead to other vehicle issues.

15

1

Share

Is the Audi Q3 four-wheel drive?

Audi Q3 is a four-wheel drive vehicle. Overview of four-wheel drive vehicles: A four-wheel drive vehicle is a car with front and rear differential-linked four-wheel drive. Since the engine power is transmitted to all four wheels, all four wheels can provide traction. In a regular two-wheel drive vehicle, if one of the driving wheels slips, the other driving wheels will also lose power. Drive configuration: Drive configuration refers to the arrangement of the engine and the number and position of the driving wheels. Most passenger vehicles have two rows of wheels, front and rear. The wheels that are directly driven by the engine to push (or pull) the car forward are the driving wheels. The most basic classification is based on the number of driving wheels, which can be divided into two-wheel drive and four-wheel drive.

9

2

Share

What is automotive paint composed of?

Can the daytime running lights of the Langdong be turned off?

What to Do If the ETC Expressway Card Is Lost?

Can I continue if I got 10 questions wrong in the Subject 1 test?

What is the cause of the Honda CR-V B1129 fault code?

How Much Horsepower Can Be Increased by Flashing the Lynk & Co 03's ECU?

Is the Audi Q3 four-wheel drive?

Why is the Bluetooth audio in the car very quiet?

Where is the best position for car mirrors?

What is the largest Volkswagen off-road vehicle called?

Why Does the Mercedes Dashboard Dim?