What is Automotive Maintenance Knowledge?

How to Play Back the Dash Cam Footage on BYD Han?

To view the playback of the BYD Han dash cam, first remove the memory card and use a card reader to access and play the footage on a computer. Uses of a dash cam: It can record video images and audio during the car's operation, providing evidence for traffic accidents. Installing a dash cam can also help prevent staged accidents (insurance fraud), thereby avoiding unnecessary troubles and losses, and protecting the car owner's interests. Dash cam audio recording: Dash cams generally have audio recording functionality, but this can be turned on or off in the settings to protect privacy. As long as the audio recording feature is enabled, the dash cam can record sound, though it typically only captures audio inside the vehicle.

9

0

Share

Why is the car's warning light constantly on?

The reasons for the car's warning light being on include faults in the water temperature sensor, crankshaft sensor, oxygen sensor, spark plugs, ignition coil, etc. When the engine warning light comes on, it can be categorized into three scenarios: 1. The car cannot start, which might be due to a fuel pump or ignition component failure—immediate assistance should be sought; 2. The warning light is on, but there are no noticeable abnormalities while driving—this could simply be a sensor malfunction, allowing for continued driving at low to moderate speeds with caution; 3. The engine warning light is on, the vehicle can still be driven, but exhibits severe shaking, lack of power during acceleration, etc.—in such cases, the car should be stopped and rescue services called.

19

4

Share

How to turn on the high beam of the Lynk & Co 03?

To turn on the high beam of the Lynk & Co 03, locate the light control switch on the left side of the steering wheel. Rotate the switch to the high beam position, and the high beam indicator will appear on the dashboard. High beam operation tips: Pull the left lever toward the driver to activate the high beam, which will turn off when released as the lever automatically resets. Push the lever away from the driver to keep the high beam on continuously; manually pull the lever back to its original position to turn off the high beam. When to use high beams: Appropriate use of high beams can help with "road recognition" and serve as a reminder to oncoming vehicles.

10

3

Share

How to Turn on the Heater in H6 - Which Button to Press?

After starting the Haval H6, press the AC button on the center console to turn on the heater. Correct way to turn on the heater: After starting the Haval H6, wait for about 8-15 minutes until the water temperature rises to the normal level. Then, you can turn on the heater. Adjust the air conditioning circulation mode to internal circulation and switch to the heater mode. Precautions for using the heater: Do not turn on the heater immediately after starting the engine. Wait until the vehicle has traveled some distance and the water temperature gauge reaches half of the normal temperature before turning on the heater. When you first turn on the heater, select a low fan speed. Once the water temperature reaches the normal level, adjust the fan speed according to your personal preference.

9

2

Share

What does motorcycle cc equal to in terms of displacement?

Motorcycle cc refers to the displacement of the engine used in the motorcycle. Generally, the displacement of a motorcycle engine is 200cc, and the engine data may vary depending on the cooling method. Air-cooled engine: Due to the limitations of the cooling method, the horsepower of the engine cannot be overly exploited. If the engine horsepower is pushed too hard, the engine may overheat during operation, leading to cylinder seizure or crankshaft locking. Therefore, air-cooled engines have strict limits on compression ratios and maximum RPM. Liquid-cooled engine: There are fewer limiting factors on horsepower. Liquid cooling is more efficient than air cooling, allowing for higher horsepower output. During operation, a liquid-cooled engine can achieve higher RPMs.

20

2

Share

Can a China VI vehicle use China V fuel?

China VI vehicles can use China V fuel. China VI standard fuel is further processed fuel, not specifically produced for certain vehicle models. Here are some relevant details: 1. Since the fuel is not produced for specific vehicle models, whether it can be used is unrelated to the vehicle model. Additionally, the state has already considered this, and Sinopec and PetroChina have upgraded their fuel products to meet China VI emission standards before the implementation of the China VI emission standard. 2. The production and sale of gasoline are based on grade requirements. China V includes 89, 92, and 95 grades. As for which grade of fuel is suitable for a vehicle, it's easy to determine because each vehicle's manual will specify it. It's best to use the fuel that matches the vehicle; otherwise, it may harm the engine.

9

0

Share

What is Automotive Maintenance Knowledge?

How to Play Back the Dash Cam Footage on BYD Han?

Why is the car's warning light constantly on?

How to turn on the high beam of the Lynk & Co 03?

How to Turn on the Heater in H6 - Which Button to Press?

What does motorcycle cc equal to in terms of displacement?

Can a China VI vehicle use China V fuel?

How to Brake Correctly?

How to Obtain a B2 Driver's License with a C1 License?

What is the tire pressure for the Corolla Hybrid?

What is the reason why the Buick Envision cannot find Bluetooth?