What is Automatic Parking?

2 Answers
McArthur
07/24/25 4:21pm
Automatic parking is an automated driving technology in vehicles equipped with an automatic parking system, which enables the car to park itself or park without a driver into a designated parking space. It assists drivers in parking the car faster, automatically, and more accurately. Below is additional information: 1. Principle: Cars with automatic parking technology are generally equipped with ultrasonic sensors, radars, cameras, and other devices. The radar or ultrasonic sensors measure environmental parameters for the system, which then evaluates and identifies available parking spaces. The radars or sensors installed around the car measure the distance and angle between the car body and surrounding objects. The system then calculates the operational process and adjusts the steering wheel rotation in coordination with the vehicle speed. The driver only needs to control the speed or may not need to perform any operation at all. 2. Operation: Different car brands and models come with varying automatic parking systems, and the specific operations may differ significantly. Potential buyers are encouraged to try out different models featuring automatic parking technology.
Was this review help?
9
0
Share
OmarLynn
08/11/25 9:03am
This automatic parking assist is an advanced feature built into the car that allows the vehicle to park itself into a parking space. I personally find it quite amazing: it's equipped with a bunch of sensors, like ultrasonic probes to scan the surrounding distance, and cameras to identify empty spots. Operating it is very simple: drive slowly past a parking space, and the system will prompt you after detecting it; choose between parallel or perpendicular parking mode; press a button, and the car will automatically steer the wheel, control the throttle and brakes, and glide into the parking space. The entire process relies on computer calculations to determine the optimal path and avoid obstacles. However, it's important to note that sensors may misjudge due to rain or fog, so you still need to keep an eye on it and not completely let go. This technology is now available in many high-end cars, and it may become more widespread in the future. It really makes driving much easier, especially when dealing with the headache of finding a parking spot in traffic jams.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What are the items for the first maintenance of JAC Refine S3?

JAC Refine S3 first maintenance items include: 1. Replace engine oil and oil filter; 2. Check if the coolant level meets the specified requirements; 3. Check the brake and clutch fluid levels; 4. Check if the power steering fluid level complies with the regulations; 5. Check for any oil leakage at the interfaces of various oil pipes in the system. Below is some relevant information: 1. Refine S3 undergoes a major maintenance at 60,000 kilometers, which typically includes replacing all auxiliary fluids (antifreeze, brake fluid, power steering fluid, transmission fluid), replacing spark plugs, and cleaning the engine from the intake to the exhaust system (throttle body, fuel injectors, fuel system, combustion chamber, intake valves, intake manifold, catalytic converter, lubrication system), in addition to changing the engine oil and filter. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. Car maintenance mainly covers the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the vehicle clean and in good technical condition, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. A car is a complex piece of machinery, and during operation, mechanical parts inevitably wear out, compounded by external human and environmental factors, leading to vehicle wear and tear.
6
3
Share

Are there regulations for car license plate screws?

There are regulations for car license plate screws. The fixing screws for car license plates are required to use M6 specification bolts. According to the "Motor Vehicle Safety Technical Inspection Items and Methods," during the registration inspection, the license plate and its installation must also meet the following requirements: 1. The vehicle should be equipped with front and rear license plate boards (frames) that meet the installation requirements for license plates, but motorcycles only need to have a rear license plate board (frame) that meets the installation requirements. The front license plate board (frame) should be located in the middle or right side of the front (according to the direction of the vehicle's movement), and the rear license plate board (frame) should be located in the middle or left side of the rear. 2. The license plate should be directly and securely installed on the vehicle using M6 specification bolts. 3. For vehicles manufactured on or after March 1, 2016, each license plate board (frame) [except for the front license plate board (frame) of three-wheeled vehicles and the rear license plate board (frame) of motorcycles] should have four license plate installation holes to ensure that the license plate can be directly and securely installed on the vehicle using M6 specification bolts.
8
0
Share

How Does the Tire Pressure Monitoring System Work?

The working principle of automotive tire pressure monitoring can be divided into two types, as detailed below: 1. Direct Tire Pressure Monitoring. The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. It then transmits the pressure data from inside the tire to a central receiver module via wireless transmitters, displaying the pressure data for each tire. When the tire pressure is too low or there is a leak, the system automatically triggers an alarm. 2. Indirect Tire Pressure Monitoring. The working principle of indirect tire pressure monitoring is: when the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotational speed compared to other wheels. By comparing the differences in rotational speeds between tires, the system monitors tire pressure. Essentially, the indirect tire pressure warning system relies on calculating the rolling radius of tires to monitor pressure. 3. Characteristics of Both Systems. Each type of tire pressure monitoring system has its pros and cons. The direct system offers more advanced features, enabling real-time measurement of the actual instantaneous pressure inside each tire and easy identification of the faulty tire. The indirect system is relatively cheaper to implement, as cars already equipped with 4-wheel ABS (each tire equipped with a wheel speed sensor) only require a software upgrade. However, the indirect system is less accurate than the direct system, cannot pinpoint the faulty tire, and involves extremely complex calibration. In certain scenarios, such as when both tires on the same axle have low pressure, the system may fail to function properly.
12
3
Share

How often should the tires on a Hyundai Elantra be replaced?

Under normal driving conditions, Elantra tires should be replaced when they reach the lower limit of usage, which is 60,000 kilometers or 3 years. In fact, the lifespan of tires is closely related to many factors, such as climate, road conditions, driving habits, installation, maintenance, and more. The following situations also warrant tire replacement: 1. Bulging or deformation: Bulging or deformation of a tire is a very dangerous condition. If such issues are found, it's best to take the car to a professional repair shop for inspection immediately. In most cases, tire replacement is recommended. These issues indicate that the internal metal coils of the tire have deformed or broken, and continuing to drive could lead to a blowout. 2. Severe wear: Each tire tread groove has a wear limit indicator, which is about 2mm thick. It is recommended to replace the tires when the tread thickness wears to 4mm above the limit indicator, or about 6mm from the deepest part of the groove. 3. Multiple patches: One or two patches won't affect tire use, but after more than three patches, it's advisable to replace the tire for safety reasons. At high speeds, the temperature inside the tire rises, and even well-patched tires with excessive damage can increase the risk of failure. 4. Sidewall puncture: A puncture in the sidewall is indeed more dangerous than one in the tread. If the damage is located below the tire marking near the wheel rim edge, the tire must be replaced because the steel wires in this area are very weak and almost impossible to repair.
11
1
Share

Can Air Filters Be Reused?

Air filters can be reused, but replacement is recommended. Using compressed air to blow or washing with water can remove thick accumulated dust, but it is difficult to clean the dust trapped inside the paper. The function of an air filter: to filter out particulate impurities in the air, ensuring that sufficient clean air enters the cylinders and preventing floating dust from being sucked into the engine, which accelerates wear on the piston group and cylinders. According to the vehicle's maintenance manual, the air filter should generally be replaced every 10,000–20,000 kilometers or during every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the buildup of throttle sludge. The position of the air filter varies depending on the intake system and engine structure, typically located in the air cleaner on the engine's intake pipe. There are two types of air filters in vehicles: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of wire mesh. Air filter: A type of filter, also known as an air cartridge, air cleaner, or element. It is primarily used in engineering vehicles, automobiles, agricultural machinery, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine inhales a large amount of air. If the air is not filtered, the suspended dust particles can enter the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles, ensuring sufficient and clean air enters the cylinders. A dirty air filter: Using an excessively dirty air filter while driving can restrict engine airflow, leading to incomplete fuel combustion, unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The automobile air cleaner is a device that removes particulate impurities from the air, consisting of one or more filter components. Its main function is to filter out harmful impurities from the air before it enters the cylinders, reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Thus, air must pass through the fine filtration of the air cleaner before entering the cylinders. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if minimal dust and minor clogging are found, it can be cleaned by blowing high-pressure air from the inside out and reused. Excessively dirty air filters should be replaced promptly.
17
5
Share

What vehicles can a C1 license drive?

According to China's "Regulations on the Application and Use of Motor Vehicle Driving Licenses": The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; and light, small, and mini special operation vehicles. Additionally, a C1 license can drive vehicles allowed by C2, C3, and C4 licenses, including small automatic transmission vehicles, light and mini automatic transmission cargo vehicles, low-speed cargo vehicles, and three-wheeled vehicles. Small vehicles refer to those with a total mass of less than 4.5 tons, seating no more than 9 people, and a vehicle length under 6 meters. C1 license examination subjects: There are a total of four subjects in the C1 license examination, conducted in the following order: traffic regulations and related knowledge (referred to as Subject 1), field driving (Subject 2), road driving (Subject 3), and safety and civilization knowledge (Subject 4). Passing standards: Subject 1 – Written test, full score of 100, passing requires 90 or above. Subject 2 – On-site, actual vehicle. Minimum requirement is 80, below 80 is failing. Subject 3 – Highway or simulated site, actual vehicle. Full score of 100, must achieve 90 or above to pass. Subject 4 – Written test, questions mainly in the form of cases, images, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions, full score of 100, passing requires 90. According to the "Motor Vehicle Driving License Business Work Standards" issued by the relevant authorities, motor vehicle driving licenses are classified into a hierarchical system, dividing licenses into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P. The permitted vehicle types for each different level of license are as follows: A1 license, permitted to drive large passenger vehicles; A2 license, permitted to drive tractors, heavy and medium full trailers, semi-trailer vehicle trains; A3 license, permitted to drive city buses with a capacity of 10 or more people; B1 license, permitted to drive heavy passenger vehicles; B2 license, permitted to drive heavy and medium cargo vehicles, etc.; C2 license, permitted to drive small and mini automatic transmission passenger vehicles, etc.; C3 license, permitted to drive low-speed cargo vehicles (originally four-wheel agricultural transport vehicles); C4 license, permitted to drive three-wheeled vehicles (originally three-wheel agricultural transport vehicles); D license, permitted to drive three-wheeled motorcycles with an engine displacement greater than 50ml; E license, permitted to drive two-wheeled motorcycles with an engine displacement greater than 50ml; F license, permitted to drive motorcycles with an engine displacement of 50ml or less; M license, permitted to drive wheeled self-propelled machinery; N license, permitted to drive trolleybuses; P license, permitted to drive trams.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.