What is Audi's Human-Machine Interaction System Called?

1 Answers
SanAndrew
07/29/25 9:05am
Audi's multimedia human-machine interaction system is called MMI. Features: In addition to providing route guidance for drivers, the MMI navigation system also has a special function: it can provide TMC real-time traffic flow information. Different levels of congestion are marked on the map in different colors, but not all roads have relevant information. Introduction: Audi's MMI multimedia human-machine interaction system first appeared in 2004, initially equipped in the Audi A6 of that time. This system is the third-generation MMI equipped by Audi and is the latest version currently used in domestic models (the latest version abroad is the fourth-generation MMI system equipped in the new A8). Its main control area is located behind the gear lever, closer to the driver, making it more convenient to operate.
Was this review help?
18
5
Share
More Forum Discussions

How to Release the Electronic Parking Brake in a Car?

The driver only needs to fasten the seatbelt inside the car, start the ignition, shift into D gear, and lightly press the accelerator pedal, and the electronic parking brake will automatically release. Due to the convenience of electronic parking brakes, many car models now use them to replace traditional mechanical handbrakes. In addition to automatically releasing when driving, the electronic parking brake can also automatically engage when the driver parks, turns off the engine, and unfastens the seatbelt. Below is the relevant introduction: 1. Definition of the electronic parking brake: The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking braking control through the friction generated between the brake disc and brake pads, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Technology of the electronic parking brake: The electronic parking brake is also known as the Electronic Parking Brake (EPB) system. The Electronic Parking Brake (EPB) system integrates the temporary braking during driving with the long-term braking after parking, and achieves parking braking through electronic control. 3. Function of the Auto Hold feature: The electronic parking brake extends from the basic parking function to the Auto Hold (AUTO-HOLD) feature. The application of the Auto Hold (AUTO-HOLD) technology eliminates the need for drivers to brake for a long time when the vehicle stops. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
1
4
Share

Where is the fuel tank cap switch located on the Cruze?

The Cruze does not have a separate fuel tank cap switch. The fuel tank cap switch is integrated with the central locking system. When the central lock is unlocked, the fuel tank cap switch can be opened. The central lock switch is located below the left side of the driver's seat. Below is extended information about the fuel tank and refueling: Cruze fuel tank capacity: The Chevrolet Cruze has a fuel tank capacity of 52 liters. Generally, small cars have a fuel tank capacity of 35 to 45 liters, while mid-size cars have a fuel tank capacity of about 55 to 75 liters. The fuel tank capacity is designed to allow driving for approximately 400 to 600 kilometers under normal conditions. Refueling precautions: Try not to wait until the fuel warning light comes on before refueling. Because the fuel pump is located inside the fuel tank, it generates high temperatures during continuous operation. Being immersed in fuel helps to effectively cool it down. When the fuel warning light comes on, it indicates that the fuel level is below the fuel pump. Refueling only when the light comes on will shorten the lifespan of the fuel pump. Having too little fuel or running out of fuel may even cause the fuel pump to burn out.
16
4
Share

Is entering a residential area over double yellow lines a traffic violation?

Entering a residential area over double yellow lines is a traffic violation. If caught by patrolling traffic police, you will face corresponding penalties. Crossing yellow lines, whether double or single, constitutes a reverse driving violation, typically resulting in a 200-yuan fine and 3 demerit points. Here are relevant details: 1. Function of yellow lines: Yellow lines separate lanes of opposing traffic directions. They are usually painted along the center of the road, acting like a divider that splits the road into two directions. Whether single or double yellow lines, solid lines strictly prohibit crossing, overtaking, turning, or U-turns. 2. Single solid yellow line: A single solid yellow line divides roads with only one lane in each direction or roads with one motor vehicle lane and one non-motor vehicle lane, indicating no crossing for overtaking or driving over the line. Crossing equals driving in the opposite direction. 3. Double solid yellow lines: Center double solid yellow lines divide roads with two or more lanes in each direction without a central divider. They strictly prohibit vehicles from crossing for overtaking or driving over the lines. Crossing them is equivalent to hitting a guardrail.
18
0
Share

What Are the Reasons Why a Car's Air Conditioning Is Not as Cold as Before?

There are several reasons why a car's air conditioning may not be as cold as before, including insufficient refrigerant or a leak, excessive pressure in the air conditioning system, a damaged evaporator temperature sensor, or a faulty pressure switch. Below are some explanations regarding car air conditioning: 1. Insufficient refrigerant or a leak: In most cases, the lack of cooling is due to insufficient refrigerant. You can first check the air conditioning pressure. If both the high and low pressures are low, it is likely a refrigerant shortage. Simply add refrigerant until the pressure is appropriate. 2. Excessive pressure in the air conditioning system: The car's air conditioning system operates under pressure due to the compressor. If too much refrigerant is added or there is a blockage in the pipes, the system pressure may become too high. In this case, the control system will disconnect the compressor's electromagnetic clutch, causing the compressor to shut down. The solution is simple: after confirming that the pressure exceeds the standard, release some refrigerant to restore normal pressure. 3. Damaged evaporator temperature sensor or pressure switch: The evaporator, also known as the evaporator box, is located in the air duct under the dashboard. Here, the refrigerant vaporizes and absorbs heat, producing low temperatures. When air flows through the narrow channels in the evaporator, it is cooled. The compressor stops when the temperature approaches the frost point. If this sensor is damaged and frequently gives false alarms about approaching the frost point, the compressor will shut down frequently.
5
2
Share

What to Do When Accumulating Over 12 Points on Your Driver's License?

After accumulating 12 points, the driver's license will be temporarily suspended, and within 15 days, you must report to the traffic management department at the place where the license was issued or where the violation occurred. You are required to participate in a 7-day theoretical course (Subject 1) and take the corresponding exam. Passing the exam will clear the points and return the driver's license; otherwise, you will need to continue studying and retake the exam. Here are the relevant details: 1. You cannot wait for the points to reset after reaching 12 points: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if a driver's license has points deducted, the driver must handle the violations and pay the fines within the current scoring cycle. Otherwise, the points will carry over to the next cycle. If 12 points are accumulated, the license will be suspended, and the driver must attend a designated course and pass the exam to clear the points. Otherwise, the points will not reset with the new scoring cycle. 2. Consequences of failing to attend the course on time: If you do not attend the course on road traffic safety laws, regulations, and related knowledge at the place where the license was issued or where the violation occurred within the specified time, or if you refuse to participate, the traffic management department of the public security authority will announce the suspension of your driver's license.
19
4
Share

Why is there no response when trying to start the Changan CS55 with the anti-theft lock engaged?

Changan CS55 failing to start may be due to incorrect gear position or a dead battery. No response when trying to start doesn't necessarily mean the car is broken. First, check if the gear position is correct. If the gear position is fine, press the horn. If it doesn't sound, the battery is dead. If it does sound, then it's another issue. Incorrect gear position: For automatic transmission vehicles, the gear must be in P (Park) or N (Neutral) when starting. If it's in R (Reverse) or D (Drive), the car won't start. Dead battery: This could be caused by leaving the headlights on for an extended period or the battery reaching the end of its lifespan. It's generally recommended to replace the battery every 2 years. Additionally, installing aftermarket accessories like high-power audio systems or DVD players can also lead to electrical circuit failures. Checking for a dead battery is simple—just press the horn to see if it sounds. Jump-starting with jumper cables: If another vehicle is available nearby, this method is time-saving, effort-saving, and cost-effective. You'll need another car that starts normally. Connect the positive terminals of both cars with jumper cables first, then the negative terminals. This will provide the necessary power. Be careful not to reverse the order. This way, the car can have power in a short time—simple and quick, isn't it?
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.