What is Aston Martin?

Should the clutch be fully released on a downhill slope in Subject 2?

Whether to press or not doesn't matter, as long as you ensure the engine doesn't stall. Below is a detailed introduction about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve). In some regions, there is a sixth item: high-speed toll card collection. 2. Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and road driving within the test area, and possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle. Be able to accurately control the vehicle's driving position, speed, and route.

6

3

Share

How long after failing Subject 3 can you schedule the next attempt?

You can schedule it after a certain period. If you successfully book a driving test but fail to attend on time, your test result will be recorded as a fail, and you must wait 20 days before rescheduling. If you cannot attend the test due to unforeseen circumstances, you must cancel the appointment in advance: Due to upgrades in the driving management system, starting from June 1, 2012, according to Article 46 of Chapter 6 in the Ministry of Public Security's 'Motor Vehicle Driver's License Business Work Standards', which states 'if an applicant fails to attend the test at the scheduled time, the test result will be recorded as a fail,' candidates who cannot attend the Subject 2 or Subject 3 test at the scheduled time must have their driving school submit a written application to the respective subject supervisor at least 2 days in advance to cancel the test. If neither a written application is submitted nor the test is attended on time, the test result will be recorded as a fail, and you must wait 20 days before rescheduling.

13

4

Share

How to fold the side mirrors on both sides of the vehicle?

There are two ways to fold the side mirrors on both sides of the vehicle: manual and automatic. For manual folding, the driver must reach out the window or step out of the vehicle to fold the mirrors. Automatic folding is typically achieved by pressing the automatic folding button for the mirrors or rotating the button to the automatic folding position, after which both side mirrors will fold simultaneously. Below is additional information about mirrors: 1. Industry standards and characteristics of car mirrors: Car mirrors are important safety components, and their surface and shape are carefully designed. Therefore, the quality and installation of mirrors are subject to industry standards and cannot be altered arbitrarily. 2. The side mirrors reflect the rear and side areas of the vehicle, while the lower mirrors reflect the front and lower areas of the vehicle. The interior mirror reflects the rear and interior of the vehicle. Due to their different purposes, the mirror structures also vary. Generally, there are two types of mirror surfaces: flat mirrors, which, as the name suggests, have a flat surface—technically described as having an "infinite surface curvature radius R"—similar to household mirrors, providing an image of the same size as seen by the naked eye. These flat mirrors are commonly used as interior mirrors.

5

1

Share

Why is the engine exhaust pipe black?

The reasons for the blackening of the exhaust pipe are as follows: 1. Poor fuel quality. The quality of fuel directly affects the working efficiency of the engine, and a large amount of impurities not only hinder the normal operation of the engine but also serve as a source of blackening. 2. Insufficient mixing of fuel and air. Inadequate mixing leads to uneven combustion, naturally resulting in incomplete combustion. 3. Turbocharged direct-injection engines are relatively more prone to blackening. Due to the high speed of the turbocharger in turbocharged engines, the mixture of fuel and air varies significantly before and after the turbo kicks in, making it difficult to control the concentration of the air-fuel mixture. Poor adjustment can cause some fuel to burn incompletely, leading to blackening. 4. Faulty catalytic converter. If the catalytic converter is damaged, its secondary oxygen sensor cannot provide accurate data to the engine control unit, causing the air-fuel mixture to become either too lean or too rich. Particularly when the mixture is too rich, symptoms such as increased fuel consumption, incomplete combustion, and severe carbon buildup in the cylinders and spark plugs may occur.

17

0

Share

What to Do When the Car Door Squeaks While Opening and Closing?

Car parts between the door and the body may require lubrication over time. Here is relevant information: 1. The car door and body are connected by hinges, similar to a household door. It is normal for hinges to make noise after prolonged use. To ensure the smooth and silent operation of the hinges, it is recommended to apply lubricant every 2-3 months for maintenance. Additionally, there is another component connecting the door and the body, known as the door limiter. As the name suggests, it is used to restrict the degree to which the door can open—first, to limit the maximum opening angle, and second, to maintain a certain opening angle. 2. If the car has been in use for some time, it is advisable to check whether the door seal has aged. Since the seal is made of rubber, it will gradually deteriorate and wear out over time, leading to noticeable wind noise and friction sounds for passengers. If the seal is aged or damaged, it is recommended to replace it directly. Also, regularly clean the dust and rainwater from the gaps in the seal during daily use to prevent aging.

12

0

Share

What brand is stek?

One of the largest suppliers of automotive paint protection films in the world. Here are the details: 1. Introduction: STEK was founded in 1977 and is headquartered in Seattle, USA. As a company with over 40 years of experience in various protective films, STEK's products cover mobile phones, tablets, screens, window films, architectural films, and automotive paint protection films. In its early development, STEK collaborated with automobile manufacturers to develop OEM clear paint protection films, passing the testing standards of major car manufacturers, thereby establishing its R&D and production capabilities in the field of automotive paint protection films and becoming one of the largest suppliers of automotive paint protection films in the world. 2. Development: As one of the largest suppliers of automotive paint protection films in the world, STEK has its own R&D team and laboratory and collaborates with world-class material manufacturers to develop new products at any time. As a rare manufacturer that combines R&D and production capabilities, STEK, in addition to collaborating with automobile manufacturers, is also committed to developing STEK-exclusive brands and terminal stores, as well as OEM cooperation models.

20

3

Share

What is Aston Martin?

Should the clutch be fully released on a downhill slope in Subject 2?

How long after failing Subject 3 can you schedule the next attempt?

How to fold the side mirrors on both sides of the vehicle?

Why is the engine exhaust pipe black?

What to Do When the Car Door Squeaks While Opening and Closing?

What brand is stek?

How to Use a Vehicle Steering Wheel for Beginners?

Is the right-angle turn in Subject 2 a left turn or a right turn?

What do you need to prepare for the Subject 1 exam?

What car has a logo with two semicircles?