What is an MPV?

Can a Car with Push-Button Start Be Locked Without Turning Off the Engine?

A car with push-button start cannot be locked without turning off the engine. For push-button start models, the vehicle must be turned off in P (Park) gear to completely cut off the power. If the engine is turned off without being in P gear, although the engine stops running, the vehicle cannot be powered off, and the doors cannot be locked. Therefore, if the engine is not turned off in P gear, you need to press the start button again before getting out of the car to completely cut off the power, allowing the doors and steering wheel to be locked. Using the push-button start when the car is in P or N (Neutral) gear does not harm the engine. However, turning off the engine while the car is in gear can cause some damage to the vehicle. Additionally, for safety reasons, it is best to press the brake pedal before using the push-button start to turn off the engine. The steps to turn off a push-button start car are as follows: Press the brake pedal, bring the vehicle to a smooth stop, shift the gear from D (Drive) to N (Neutral), engage the parking brake, release the foot brake, press the brake pedal again, shift the gear from N to P (Park), release the foot brake, and then press the push-button start key to turn off the power and complete the engine shutdown.

3

5

Share

How Often Should Carbon Deposits Be Cleaned in a Car?

Cleaning carbon deposits in a car depends on the situation. For cars driven in urban areas, it is recommended to clean every 20,000 to 30,000 kilometers, while for those driven on highways, every 30,000 to 40,000 kilometers is advisable. Below are the methods for cleaning carbon deposits: 1. Engine Drip Method: Utilize a small tool resembling an IV drip, where the cleaning agent is introduced into the engine through a tube. 2. Additive Method: Directly add a cleaning additive to the fuel tank. The drawback is that long-term use is required for noticeable effects. 3. Direct Engine Disassembly and Cleaning: This involves disassembling the engine for cleaning, which requires significant time and effort and demands a high level of expertise.

17

2

Share

Is Driving with an Expired License Considered Unlicensed Driving?

Strictly speaking, driving even one day after expiration constitutes unlicensed driving. However, there are two scenarios regarding an expired driver's license: one is when the validity period expires, within which the license can be renewed through inspection within one year and continue to be used. If it exceeds one year, the driver must retake the exams to obtain a new license. The other scenario is when only the inspection period has passed, which requires different handling procedures. When replacing a motor vehicle driver's license, the driver must undergo inspection by the traffic management department of the public security authority: 1. Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks must undergo inspection at the traffic management department within thirty days after the end of each scoring cycle. However, if there are no demerit points recorded during a scoring cycle, the inspection for that cycle is exempted. 2. Drivers holding licenses for vehicle types not specified in the third clause of this article, who are involved in a traffic accident resulting in death and bear equal or greater responsibility without having their license revoked, must undergo inspection at the traffic management department within thirty days after the end of the scoring cycle. 3. Motor vehicle drivers engaged in commercial transportation in a location other than their registered residence can directly undergo inspection at the transportation location after registering with the local vehicle management office for one year.

1

5

Share

Where is the cabin air filter located in the Honda Fit?

The cabin air filter in the Honda Fit is located inside the blower behind the glove compartment on the passenger side. To replace the filter, you need to remove the glove compartment and then open the cabin air filter cover. The cabin air filter is a crucial component of the air conditioning system and requires regular replacement. Typically, it should be replaced every 10,000 kilometers. Here are some key details about the cabin air filter: 1. The cabin air filter is an important part of the air conditioning system and needs to be replaced periodically. Most vehicles require replacement every 10,000 kilometers. 2. If the cabin air filter is not replaced for a long time, it can affect the efficiency of the air conditioning system and may produce unpleasant odors when the AC is turned on. 3. If you live in an area with poor air quality, you can purchase a cabin air filter capable of filtering PM2.5 particles. 4. When purchasing a cabin air filter, always opt for products from reputable brands and avoid cheap, low-quality filters. 5. The air conditioning system also requires regular cleaning and disinfection. Otherwise, bacteria can accumulate inside the system, posing health risks to passengers.

2

0

Share

What is the function of a car fuel injector?

The function of a car fuel injector: 1. A car fuel injector is a simple solenoid valve. When the electromagnetic coil is energized, it generates suction, lifting the needle valve to open the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that facilitates full combustion. 2. The fuel injector receives the injection pulse signal from the engine's electronic control unit to precisely control the fuel injection volume. 3. The fuel injector is a highly precise component that requires a large dynamic flow range, strong resistance to clogging and contamination, and excellent atomization performance.

15

0

Share

Why Should Brake Fluid Be Replaced?

Failure to replace brake fluid for an extended period can lead to its deterioration, which may result in brake system failure. Generally, brake fluid should be replaced every 2 years or approximately 60,000 kilometers. The following points should be noted during the use and replacement of brake fluid: 1. If mineral oil is mixed into the brake fluid, the entire brake fluid should be replaced. For example, if gasoline, diesel, or engine oil accidentally mixes into a brake system that uses synthetic brake fluid, the incompatibility of the fluids may significantly reduce braking effectiveness. 2. If water is mixed into or absorbed by the brake fluid, or if impurities or sediments are found in the brake fluid, do not proceed with the injection. In such cases, the brake fluid should be replaced or carefully filtered; otherwise, insufficient brake pressure may occur, affecting braking performance. 3. For vehicles equipped with a brake fluid level warning device, always monitor whether the warning indicator light is flashing and whether the warning sensor is functioning properly. If the brake fluid level is low, it should be replenished promptly. The stored brake fluid should be maintained between the marked minimum and maximum capacity lines. 4. During normal driving, if the braking force becomes inconsistent (sometimes light, sometimes heavy), the brake fluid should be replaced. Before replacement, the brake system should be thoroughly cleaned with alcohol.

12

0

Share

What is an MPV?

Can a Car with Push-Button Start Be Locked Without Turning Off the Engine?

How Often Should Carbon Deposits Be Cleaned in a Car?

Is Driving with an Expired License Considered Unlicensed Driving?

Where is the cabin air filter located in the Honda Fit?

What is the function of a car fuel injector?

Why Should Brake Fluid Be Replaced?

How to Maintain a Car Battery?

What are the differences between BYD DMp and DMi?

Is Cruise Control More Fuel-Efficient or Is Manual Driving More Fuel-Efficient?

Where are the motors used in Tesla produced?