What is an Intelligent Connected Vehicle?

How to Turn on the Fog Lights of a Volkswagen Car?

To turn on the fog lights of a Volkswagen car: After rotating the light switch to position 1 or 2, pull the switch out to the first position to activate the front fog lights, and the symbol inside the switch will illuminate. Similarly, after rotating the light switch to position 1 or 2, pull the switch out to the second position to activate the rear fog lights, and the indicator light on the instrument cluster will illuminate. The Santana is a compact car under the Volkswagen brand, with exterior dimensions of 4475mm in length, 1706mm in width, and 1469mm in height, a wheelbase of 2603mm, and body structures available as a 4-door, 5-seat sedan or a 5-door, 5-seat hatchback. The Santana is equipped with a 1.5L naturally aspirated engine, featuring an L-type cylinder arrangement, and is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.

3

1

Share

How to Control Speed on Long Downhill Slopes?

Before entering a long downhill slope, reduce the vehicle speed to ensure a slow entry into the descent. Shift into an appropriate gear before the descent, typically second or third gear, and avoid shifting gears after entering the downhill section. Control the speed primarily using the engine's braking effect, supplemented by foot braking, and never coast in neutral. Adjust the speed to a controllable level based on the slope and curve conditions, and select the appropriate gear. Below are guidelines for gear usage on downhill slopes: 1. On downhill slopes, never coast in neutral; always engage an appropriate gear to utilize the engine's braking effect and reduce coasting speed. 2. On long downhill slopes, if the brakes fail, human reaction time is required, during which the downhill speed can increase rapidly. At certain speeds, it may become difficult to shift gears—older vehicles might handle it better, but modern vehicles could experience gear grinding. In such situations, failing to engage a gear promptly is extremely dangerous, as a second can be life-determining. Hence, shifting gears on long downhill slopes is essential for speed control. 3. Use brakes cautiously on downhill slopes. Before descending, test the brake performance to ensure it is functioning properly. If any faults are detected, resolve them before proceeding downhill.

10

3

Share

Is 'ON' On or Off?

"ON" means on, and "OFF" means off. Here is a related introduction to car buttons: 1. The "SEL" key is the menu selection confirmation button, usually located on the multifunction steering wheel. 2. The "OK" key has the exact same function as the "SEL" key, but some cars use "SEL" while others use "OK". 3. The "A/C" button is the compressor switch, short for Air Condition, which is the air conditioning cooling switch. 4. "VOL+/-" are the volume adjustment buttons. VOL is the abbreviation of the word "volume", meaning sound level, and it can adjust the volume of the car audio. 5. "MUTE" is the mute button, which can mute the sound with one press. 6. "MODE" is the mode-switching button. 7. "SET" on the multifunction steering wheel is the cruise control function button. 8. The button with an "OFF" under a circled "A" is the auto start-stop function switch. Pressing it can turn the engine auto start-stop function on or off.

6

5

Share

What procedures are required for transferring a driver's license across provinces?

First, you need to prepare your ID card and one-inch white-background color photos, then go to the local vehicle management office where you want to transfer your license to complete the transfer procedures. The driver's license test is an examination to obtain a motor vehicle driver's license, and the content and subjects of the test are uniform nationwide. Below is a related introduction to the driver's license test: 1. Test content: The test is divided into four parts: theoretical knowledge, field driving skills, road driving skills, and civilized driving knowledge. Chinese citizens aged 18 and above can take the test. 2. Passing standards: Subjects 1 and 4 are conducted in written form, with a full score of 100, and a score of 90 or above is considered passing. The field driving test is Subject 2, with a full score of 100, and a score of 80 or above is passing. Subject 3 is the road driving test, with a full score of 100. Depending on the type of vehicle being tested, the passing score is either 90 or above or 80 or above. Passing all four subjects will qualify you to obtain a driver's license.

12

5

Share

What is the latest time for vehicle annual inspection?

Vehicle annual inspection can be processed on the latest day of the inspection expiration date. Precautions for vehicle annual inspection: 1. Non-operational passenger cars (including non-operational passenger cars, non-operational small and micro passenger vehicles, excluding vans and vehicles with 7 seats or more) are exempt from inspection for 6 years. 2. Operational passenger vehicles must be inspected once a year within 5 years; after 5 years, they must be inspected every 6 months. Procedures for annual inspection: 1. Article 49 of the "Regulations on the Registration of Motor Vehicles" clearly stipulates that the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration place within three months before the expiration of the motor vehicle inspection validity period. 2. Before applying, the owner of the motor vehicle must settle all traffic violations and accidents related to the vehicle. 3. According to Article 47, Paragraph 4 of the "Administrative Measures for Motor Vehicle Registration", vehicles that fail to undergo safety technical inspection within the prescribed period will be given a warning or fined up to 200 yuan by the public security traffic management department, and the annual inspection can only be conducted after paying the fine.

2

5

Share

What Do the Plus and Minus Signs on an Automatic Transmission Mean?

Automatic transmission cars with plus and minus signs refer to the manual mode of the automatic transmission. The plus sign is for manually upshifting, and the minus sign is for downshifting. Below are the specific details: Specific operations for upshifting and downshifting with the plus and minus signs: Regardless of the current gear, pushing the gear lever toward the plus sign direction once will upshift by one gear. After pushing, the gear lever will automatically return to its original position, allowing repeated pushes to upshift further. Pulling the gear lever toward the minus sign direction once will downshift by one gear, and continuous pulls will result in continuous downshifting. Automatic transmissions with plus and minus signs indicate that the transmission is a manual-automatic (Tiptronic) transmission with manual functionality: While driving, shifting the gear lever from the D (Drive) position to the plus/minus side will simulate a manual transmission, preventing the transmission from automatically upshifting. Usage of the plus and minus signs in D mode: With the gear lever in the D position, moving it to the right will engage the manual mode. Pushing the lever upward once will upshift by one gear, while pulling it downward once will downshift by one gear. Note that upshifting may require certain speed and engine RPM conditions, whereas downshifting does not have such requirements.

19

3

Share

What is an Intelligent Connected Vehicle?

How to Turn on the Fog Lights of a Volkswagen Car?

How to Control Speed on Long Downhill Slopes?

Is 'ON' On or Off?

What procedures are required for transferring a driver's license across provinces?

What is the latest time for vehicle annual inspection?

What Do the Plus and Minus Signs on an Automatic Transmission Mean?

Can I Drive on the Highway with a Brand-New Car?

Where is the exhaust gas valve located on a BMW 730?

How Does an Anti-Roll Bar Work?

What Are the Possible Reasons for Hearing a Collision Sound While Reversing Without Visible Damage to the Car?