What is an engine mount rubber?

Why Is There a Gasoline Smell When Starting a Cold Engine?

Cold start gasoline smell may be caused by an oil leak somewhere or a faulty fuel injector. If the fuel injector is malfunctioning, gasoline cannot be fully atomized during a cold start, leading to incomplete combustion and resulting in a stronger gasoline smell in the exhaust. Additional Information: 1. If there is a leak in the car's fuel tank or fuel lines, consider whether the car has experienced a significant collision. Generally, owners can check for fuel tank leaks by observing whether there are oil drips on the ground where the car is parked or nearby. 2. Sometimes, during a cold engine start in winter, it may be harder to ignite due to the cold weather. This can cause some gasoline to be expelled through the exhaust pipe, resulting in a gasoline smell, which is a relatively normal phenomenon. Additionally, after the car is turned off, some unburned gasoline may remain. Since the car is in a closed state, the evaporated gasoline fumes can linger inside the car, also causing a gasoline smell.

16

2

Share

What is the difference between Dongfeng Nissan and Venucia?

The differences between Dongfeng Nissan and Venucia are as follows: 1. Dongfeng Venucia is a joint-venture independent brand under Dongfeng Nissan. Dongfeng Nissan is a joint venture between Dongfeng and Nissan, while Dongfeng Venucia is a joint-venture independent brand under Dongfeng Nissan. The main difference lies in the fact that Dongfeng Nissan is a joint-venture brand, while Dongfeng Venucia is an independent brand. Both companies are committed to creating a comfortable automotive life for consumers. 2. Different technologies and production lines. The relationship between these two brands can be described as 'localization of Nissan vehicles' and 'maximizing profits from existing technologies and platforms.' By rebranding 'Nissan' as 'Venucia,' the commercial value of Nissan remains unaffected. The difference is that Venucia utilizes outdated Nissan technologies and production lines for localization. In terms of both quality and technology, Venucia is considered 'outdated' by Nissan standards and is far inferior to 'Nissan.' Venucia is referred to as a 'joint-venture independent brand.' Naturally, Nissan is considered superior.

7

1

Share

What Are the Hidden Dangers of Flood-Damaged Vehicles?

Below are the hidden dangers of flood-damaged vehicles: 1. Rust and seizure of components, as water immersion causes rust in the moving mechanisms of these parts, especially in infrequently moved components like fuel tank caps. Once rusted shut, they are extremely difficult to handle and can only be opened through forceful means. 2. Malfunctioning electronic devices, with the biggest issue being the hidden dangers in electronic equipment. Symptoms may include intermittent failures or sudden malfunctions after a long period. Electronic devices more prone to damage include airbag control units, collision sensors, power seats, etc., all of which share the characteristic of being installed on the chassis. 3. Damage to the engine and transmission, as the fuel tank's position can also rust, making it inevitable for the engine to take in water.

15

4

Share

At what temperature does the engine coolant temperature warning light come on?

The temperature gauge ranges from 0-130 degrees Celsius, with the normal temperature being 90 degrees at the center. After the vehicle starts, the coolant temperature rises rapidly. Once the needle reaches the center position, the temperature stabilizes. Generally, it's best to start driving when the temperature reaches the middle position. The warning temperature typically occurs between 115-120 degrees Celsius. Additional information: 1. The car radiator, also known as the heat exchanger, is a key component of the vehicle's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. It is an integral part of the car engine. 2. Working principle: When the engine's coolant temperature is high, the water pump circulates the coolant repeatedly to lower the engine's temperature and protect it. In winter, if the coolant temperature is too low, the circulation stops to prevent the engine from becoming too cold.

2

4

Share

What are the key points of Subject 2?

The key points of Subject 2 are as follows: 1. Use first gear and idle speed throughout the process, do not press the accelerator to speed up, and drive steadily and slowly. 2. When parallel parking, if you cannot see the rear wheels in the rearview mirror, you can lean your head out or tilt your head to look at the rearview mirror. 3. When starting on a slope, be sure to stabilize the clutch and control the balance between the accelerator and clutch to avoid stalling or rolling back. 4. Before entering a sharp turn, slow down and straighten the wheels or align the car body, staying as close to the right side line as possible. 5. When driving on a curve, do not turn the steering wheel too sharply; after entering the curve, try to take a wider path. 6. During reverse parking, use first gear and reverse gear with idle speed, aim accurately, control the key points and timing, and know how to make minor adjustments to correct any deviations observed in the rearview mirror.

2

4

Share

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

The differences between wheel balancing and four-wheel alignment are as follows: 1. Wheel balancing adjusts the even weight distribution of the four wheels, while four-wheel alignment adjusts the suspension parameters. 2. Wheel balancing only requires removing the wheels, whereas four-wheel alignment requires lifting the entire vehicle. 3. Wheel balancing is generally needed every 3-6 months, while four-wheel alignment is not necessary unless specific issues arise. Additional relevant information is as follows: 1. Four-wheel alignment is based on the vehicle's four-wheel parameters and is adjusted to ensure good driving performance and reliability. Simply put, it involves adjusting the geometric angles of various parts such as the wheels, suspension system, and steering system to ensure the tires grip the road optimally, providing a smooth and comfortable driving experience. 2. Due to manufacturing imperfections, the wheel hubs and tires may not have perfectly even weight distribution. Uneven weight distribution can lead to issues like vehicle vibration, directional deviation, or a floating steering wheel while driving. If the car pulls to one side, it may be because the tires need wheel balancing.

1

Share

What is an engine mount rubber?

Why Is There a Gasoline Smell When Starting a Cold Engine?

What is the difference between Dongfeng Nissan and Venucia?

What Are the Hidden Dangers of Flood-Damaged Vehicles?

At what temperature does the engine coolant temperature warning light come on?

What are the key points of Subject 2?

What is the Difference Between Wheel Balancing and Four-Wheel Alignment?

What are the causes of insufficient cylinder pressure?

Where is the heater switch on the old Buick GL8?

What is the warranty period for the BYD Tang?

What is the difference between 1.6L and 1.6T?