What is an 8-speed automatic manual transmission?

1 Answers
VonStella
07/29/25 7:47pm
An 8-speed automatic manual transmission refers to a car's transmission with 8 gear ratios. Below is an introduction to transmission-related content: 1. Multi-function switching: The transmission can switch between automatic and manual modes. When switched to manual mode, the 8th gear is the highest. 2. Function of the transmission: It changes the transmission ratio, expands the torque and speed of the driving wheels, allows the car to reverse, and facilitates gear shifting or power output. 3. Transmission maintenance methods: Replace the automatic transmission fluid every 12 months or 20,000 kilometers, avoid coasting in neutral, regularly check fluid levels, do not skip gears when upshifting, do not force the transmission into neutral, do not shorten the idle warm-up time, avoid gear grinding when shifting, and perform regular maintenance and cleaning of the automatic transmission.
Was this review help?
4
4
Share
More Forum Discussions

Why is there no sound from car music?

Car music may have no sound due to reasons such as circuit failure or audio system damage. Circuit failure: Due to aging of the circuit and possible cutting or friction from plastic inside, the circuit may become disconnected or have poor contact, resulting in no sound from the audio system. Setting issues such as adjusting the audio to left and right channels can also cause the audio system to produce no sound. Introduction to car audio systems: Car audio systems consist of two main parts: the head unit and the speakers. The head unit, professionally defined as the sound source, converts digital signals from music software into corresponding electrical signals. It is installed on the car's control panel and serves as the core of any audio system, as well as an important component of the sound system. Speakers are electroacoustic transducers that convert electrical energy into sound energy. Their importance in the car audio system is extremely prominent, as their quality directly affects the system's playback performance. The function of speakers is to convert electrical energy into sound energy, thereby moving air to produce audio that enters the human ear, resulting in a good listening experience.
19
5
Share

What do the air pressure indicators 1 and 2 on HOWO dashboard represent?

On HOWO dashboard, air pressure indicator "1" displays data from the "individual trip memory", while "2" shows data from the "cumulative trip memory". Here's more information about HOWO: 1. Positioning: HOWO is a model under SINOTRUK Jinan Truck Co., Ltd., China National Heavy Duty Truck Group, serving as one of SINOTRUK's flagship products. 2. Configuration: The basic configuration of HOWO dump truck includes 375HP EGR China III engine, sleeper air conditioning, HW15710 transmission, ZF8098 imported steering gear, AC16 axle, HF9-ton front axle, 1200 tires, and cargo box dimensions: 8200*2300*1000, designed with mining-type structure.
19
5
Share

What are the differences between Sagitar and Bora?

The differences between Sagitar and Bora are as follows: 1. Different production platforms. Sagitar's production platform is more advanced than Bora's, so whether it's chassis craftsmanship, laser welding length, or overall vehicle assembly quality, Sagitar surpasses Bora. 2. Different production technologies. Sagitar is the latest product of Volkswagen's PQ35 platform, while Bora is a product of Volkswagen's PQ34 platform. The new Bora is a hybrid developed by applying Sagitar's technology on the basis of Bora and incorporating the preferences of Chinese consumers, rather than being entirely new. Sagitar, on the other hand, is the fifth generation of Jetta, both in terms of technology and model, being larger and more advanced. If comparing which one is more worthwhile, naturally it's Sagitar. 3. Different configurations. Bora lacks rear air vents, while Sagitar features rear independent suspension.
2
1
Share

What is the wading depth of the Great Wall M4?

The safe wading depth of the Great Wall M4 is when the water level does not exceed half the height of the vehicle's tires. Below is an introduction to the Great Wall M4: Vehicle Dimensions: The Great Wall M4 has a body length, width, and height of 3995 mm, 1728 mm, and 1617 mm respectively, with a wheelbase of 2383 mm. The wheelbase is the distance between the centers of the front and rear wheels. In terms of exterior dimensions, the Great Wall M4 can be considered a typical compact SUV, with a 185mm ground clearance and relatively large tire size, indicating its off-road capability. Engine and Suspension: The Great Wall M4 is equipped with a 1.5L VVT all-aluminum engine developed by Great Wall, which is widely used in multiple products under the Great Wall brand. The vehicle features four-wheel disc brakes and a rear longitudinal arm torsion beam composite suspension, which, although semi-independent, aligns well with the Great Wall M4's positioning.
5
2
Share

What are the causes of Audi oil level sensor failure?

Audi oil level sensor failure causes are as follows: 1. The oil level sensor is faulty. 2. There is an open circuit or poor contact in the connection line between the oil level and the instrument panel. 3. The instrument panel itself is faulty. The treatment measures and fault analysis are as follows: 1. Treatment measures: Replace the oil level sensor, the fault indicator light will no longer illuminate, and the fault is eliminated. 2. Fault analysis: The engine oil level converts the oil surface height and temperature of the engine oil pan into a pulse signal whose width changes with the oil level, and inputs it into the instrument panel ECU. The ECU analyzes and calculates this pulse signal and then outputs a control signal to display the oil level and temperature on the instrument panel, and uses it as the basis for whether the low oil level warning light is illuminated. When the oil level sensor has no signal output, or the signal is not within the normal range, the ECU will illuminate the oil level sensor fault indicator light to remind the driver to repair the fault in time.
13
0
Share

Can I Schedule the Subject Three Test Right After Passing Subject Two?

You can schedule the Subject Three test right after passing Subject Two. As long as you have obtained your driving study certificate for at least 30 days, which means 30 days have passed since you passed Subject One, you are eligible to schedule the Subject Three test. Even if you have just completed Subject Two, you can still schedule Subject Three as long as this condition is met. Here is some information about Subject Three: 1. Subject Three is part of the motor vehicle driver's license examination, referred to as the road driving skills and safe civilized driving knowledge test. 2. The road driving skills test generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and night driving. The test content varies for different types of vehicles.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.