What is AMT?

1 Answers
DiAmy
07/30/25 7:59am
Here is the relevant introduction about AMT: 1. The Automated Manual Transmission (AMT) is improved based on the traditional manual gear transmission; it is an electromechanical-hydraulic integrated automatic transmission that combines the advantages of both AT (Automatic) and MT (Manual). 2. AMT not only has the advantage of automatic shifting from hydraulic automatic transmissions but also retains the strengths of the original manual transmission, such as high gear transmission efficiency, low cost, simple structure, and easy manufacturing. It combines the advantages of both, making it an electromechanical-hydraulic integrated automatic transmission very suitable for China's national conditions. 3. AMT uses advanced electronic technology to transform the traditional manual transmission, not only retaining the original gear transmission's high efficiency and low cost but also possessing all the advantages of automatic shifting from hydraulic automatic transmissions.
Was this review help?
5
5
Share
More Forum Discussions

Will I be penalized for changing lanes over a solid white line at a traffic light?

Changing lanes by crossing a solid white line at a traffic light intersection is considered a traffic violation. Vehicles that change lanes by crossing a solid line will be fined and receive 3 demerit points. Below is the relevant content: According to Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Motor vehicles passing through intersections controlled by traffic signals shall proceed according to the following rules: 1. Drive according to the road: At intersections with marked guide lanes, enter the guide lane according to the intended direction of travel. 2. Roundabouts: Vehicles preparing to enter a roundabout shall yield to vehicles already in the intersection. 3. Turning precautions: When turning left, turn from the left side of the intersection center point. Turn signals must be used when turning, and low beams must be used when driving at night.
12
1
Share

What are the restricted hours for hazardous material vehicles?

The restricted hours for hazardous material vehicles are as follows: Hazardous chemical vehicles are mandated to rest between 0:00 and 6:00 at night, during which time they are prohibited from traveling on highways. Relevant information is introduced as follows: The "Safety Management Measures for Road Transport of Dangerous Goods" requires the safe, efficient, and convenient transportation of hazardous materials in multiple aspects. Currently, many provinces have adopted different measures for hazardous material vehicles on highways. Many provinces have responded to the call and imposed restrictions on hazardous material vehicles traveling on highways. In provinces such as Zhejiang, Hunan, Jiangsu, Guangdong, Hebei, Shaanxi, Jilin, Shanxi, Chongqing, Sichuan, Guangxi, and Liaoning, the prohibited hours for hazardous material vehicles on highways are from 0:00 to 6:00 daily. In addition, other provinces have also implemented different measures for hazardous material vehicles on highways. The specific measures are as follows: 1. Shandong Province: Prohibited hours are from 22:00 to 6:00 daily. 2. Hubei Province: Prohibited hours are from 0:00 to 6:00 daily, with sections such as the Huyu Expressway (Yidu Station-Baiyangtang Provincial Boundary Station), Enlai Expressway (Luozhentian Interchange-Exi South Station), and Enqian Expressway (Enlai Enqian-Chaoyang City) prohibiting hazardous material vehicles 24 hours a day. 3. Tianjin Province: Prohibited hours are from 22:00 to 6:00 daily, with the outer ring road prohibiting passage 24 hours a day. 4. Inner Mongolia: From Hohhot South to Horinger boundary, the prohibited hours for both directions at each toll station are from 17:00 to 6:00 daily. 5. Anhui Province: Prohibited hours are from 2:00 to 5:00 daily. 6. Heilongjiang Province: Prohibited hours are from 20:00 to 6:00 daily. 7. Ningxia Province and Gansu Province: Prohibited hours are from 0:00 to 5:00 daily.
4
2
Share

What Honor Does a Hongqi Car Driver Belong To?

Hongqi car drivers belong to the honor of model workers. Below are the evaluation criteria for Hongqi car drivers: 1. Service attitude: Use civilized language, maintain a consistent service attitude for both leaders and employees, be hardworking and not afraid of hardship or fatigue. 2. Vehicle appearance: Keep the interior and exterior of the vehicle clean and tidy daily, and promptly clean after rain or snow. 3. Work discipline: Do not be late when picking up or dropping off personnel, do not violate traffic rules, comply with work regulations, do not leave the post during working hours, attend safety meetings on time, and follow the center's safety regulations. It is strictly prohibited to park the vehicle in restaurants or public entertainment venues. 4. Safe driving: Speeding is strictly prohibited, as is driving while fatigued, driving under the influence of alcohol, and using official vehicles for private purposes. 5. Vehicle maintenance: Perform regular maintenance on time, detect and repair problems early, avoid reckless driving, and do not drive a faulty vehicle.
11
3
Share

What does traffic violation code 1356 mean?

Violation code 1356 means: Failing to slow down when passing through a pedestrian crossing. Article 47 of the Road Traffic Safety Law of the People's Republic of China states: When motor vehicles pass through pedestrian crossings, they shall slow down; when encountering pedestrians crossing the road, they shall stop to yield. When motor vehicles pass through roads without traffic signals and encounter pedestrians crossing the road, they shall yield. Article 3 of the Scoring Standards for Road Traffic Safety Violations: If a motor vehicle driver commits any of the following violations, 3 points will be deducted: Driving a motor vehicle through a pedestrian crossing without slowing down, stopping, or yielding to pedestrians as required. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the scoring classification code, the third and fourth digits are sequential codes, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category of the violation under the Road Traffic Law. Second digit: Scoring classification code, indicating the points deducted for the traffic violation. Third and fourth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates 3 points will be deducted, and "035" indicates the fifth item of the third violation under the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle violations, e.g., 1003. Codes starting with 2 indicate non-motor vehicle violations, e.g., 2002. Codes starting with 3 indicate pedestrian or passenger violations, e.g., 3030. Codes starting with 4 indicate highway violations, e.g., 4002. Codes starting with 5 indicate other regulations, e.g., 5005. Codes starting with 7 indicate provincial, autonomous region, or municipal implementation rules, e.g., 7008. Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to check motor vehicle violations: Visit the office halls of traffic police departments in various districts and counties to query through touch terminals. Log in to the public service websites of local public security traffic management bureaus, find the vehicle violation query section, enter the license plate number and engine number, and click to query. Call the hotline (area code + 114) to inquire. Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query.
19
5
Share

Why is there a buzzing sound from the electric motor in the right rear wheel after turning off the engine?

This situation is normal. It is the sound of the exhaust pipe contracting, and the noise will disappear after a few minutes. Models equipped with electronic parking brakes may also experience this phenomenon, which is the sound of the electronic parking brake motor and is also normal. Here is some extended information: 1. Working principle: The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking braking through the friction generated between the brake disc and brake pads. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button. 2. Thermal expansion and contraction of the car exhaust pipe: When the car is running, it burns gasoline, and through complex chemical reactions, part of the energy is converted into heat energy, which is discharged through the exhaust system. The muffler is basically at the end of this system and its function is to reduce the noise of the exhaust. The muffler has to withstand the impact of hot airflow when working, so it naturally heats up. After turning off the engine, due to thermal expansion and contraction, it will make a whirring sound for a while, sometimes quite loud, which is all normal.
20
5
Share

Can the Rearview Mirror Glass Be Replaced Separately?

The rearview mirror glass can be replaced separately, and the new glass can be installed directly. Here is some relevant information about rearview mirrors: 1. Classification of Rearview Mirrors: Rearview mirrors are categorized by their installation positions into exterior rearview mirrors, lower rearview mirrors, and interior rearview mirrors. By purpose, the exterior rearview mirrors reflect the rear and side of the car, the lower rearview mirrors reflect the front and lower part of the car, and the interior rearview mirrors reflect the rear of the car and the interior situation. Different purposes lead to different mirror structures. 2. Adjustment Methods for Rearview Mirrors: Adjust the left and right positions so that the left edge of the mirror just cuts off your right ear in the reflection, which means that under normal driving conditions, you cannot see yourself in the central rearview mirror. For the up and down positions, place the distant horizon in the center of the mirror. The key to adjusting the central rearview mirror is to place it horizontally in the middle and position your ear on the left. Place the distant horizon horizontally along the centerline of the central rearview mirror, then move it left or right so that the image of your right ear is just at the left edge of the mirror.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.