What is aeolus car?

Can tires with small cracks after five years but minimal wear still be used?

Tires with small cracks after five years of use but minimal wear should not continue to be used. Below are specific guidelines for tire replacement: 1. Replacement time depends on conditions: For drivers with good driving habits, tires generally need to be replaced every 3-5 years or after traveling 60,000-80,000 kilometers. If driving conditions are harsh, such as frequently traveling on gravel roads or experiencing frequent traffic jams, sudden braking, or sharp turns, the replacement interval will be shorter. 2. Tire aging period: The primary material of tires is rubber, which undergoes natural aging. This typically manifests as the tires hardening and developing small cracks on the sidewalls. The natural aging period is usually 4-5 years. Tires that have been used for five years should be replaced promptly to avoid the risk of blowouts. 3. Check tire wear: If the tire wear is severe and the tread pattern is level with the wear indicators, the tires should be replaced. Otherwise, braking on wet or slippery roads will be more difficult, increasing the risk of losing control of the vehicle. Additionally, driving on rough surfaces may lead to tire blowouts.

11

3

Share

What Are the Most Practical Freebies to Ask for When Buying a Car from a 4S Shop?

When purchasing a car from a 4S shop, the most practical freebies to request are labor hour cards, maintenance vouchers, dash cams, or underbody armor. Below is a detailed introduction to automotive 4S shops: 1. Sales and After-Sales: 4S shops can be divided into sales and after-sales sections. Sales further include new car sales, used car sales, corporate client sales, and beauty/accessory sales. After-sales covers routine maintenance, insurance claim handling, manufacturer warranty claims, and auto insurance sales. 2. Brand Dealerships: As authorized dealerships, 4S shops must comply with automaker requirements regarding unified store design, standardized management, consistent service standards, cohesive brand culture, and aligned marketing campaign themes. Automakers also evaluate 4S shops' operational conditions since these dealerships represent the brand's culture and values, serving as consumers' primary touchpoint with the automotive brand.

12

0

Share

Is the Launch Gear in Toyota CVT Transmission Useful?

Yes, it is useful. The CVT transmission relies on the friction of the steel belt to transmit power. It consists of two sets of V-shaped pulley structures, each composed of two conical wheels. By changing the effective diameter, different transmission ratios can be achieved. Because of this, the CVT can achieve any transmission ratio within its range, keeping the engine at the most suitable operating conditions for better fuel economy. Additionally, the CVT has no shift gaps, making it very smooth. Below is more information about the CVT transmission: Introduction: CVT refers to a type of automotive transmission. The difference between CVT and stepped transmissions is that its transmission ratio is not a series of discrete points but a continuous range of values, resulting in excellent fuel economy, power performance, and smooth driving, while also reducing emissions and costs. Advantages: Since there are no traditional automatic transmission gears, there is no shift process, eliminating the associated shift shock. Therefore, the power output of the CVT transmission is linear, providing a very smooth driving experience.

2

3

Share

What do the internal and external air circulation modes in a car mean?

External circulation refers to the airflow between the outside and inside of the vehicle. The air blown by the fan comes from outside the car, and even when the fan is not turned on, air is still drawn into the car while driving, replenishing the fresh air inside. Internal circulation closes the airflow passage between the inside and outside of the car. Without the fan, there is no airflow circulation. When the fan is turned on, the air drawn in comes only from inside the car, creating an internal airflow cycle. Here is more information about internal and external circulation: 1. External circulation principle: When external circulation is activated, the car's fan draws air from outside into the car, allowing air from outside and inside the car to circulate. Even if the fan is not turned on, air will still enter the car while driving, providing fresh air from outside. 2. Internal circulation principle: When internal circulation is activated, it means the airflow passage between the inside and outside of the car is closed. Without the fan running, there is no airflow circulation inside the car. When the fan is operating, the air drawn in comes only from inside the car, ensuring that the airflow inside the car continues to circulate.

2

1

Share

Does the Avalon use Aisin 8AT?

The Avalon is equipped with the Aisin 8AT. The gear shifts of the Avalon's 8AT transmission are very smooth. This model is paired with a 2.5L engine, offering excellent fuel economy. It is a very good transmission, and only high-end cars opt for AT transmissions. The advantages of the Avalon are introduced as follows: Elegant exterior: The exterior is elegant and upscale, with a bold front grille, a sleek body, full body curves, and exquisite wheels, giving a sense of strength with softness. The overall look is very dynamic. Simple interior: The interior design is simple yet elegant, with seats and steering wheel made of genuine leather, providing comfort and softness. The multifunction steering wheel has numerous buttons, but the functional zones are very clear. The entire dashboard is very neat and well-organized, showing a sense of symmetrical beauty. Spacious space: In terms of space, both front and rear seats are very spacious, with body dimensions of 4975*1850*1450*2870mm.

19

5

Share

What are the documentation requirements for parallel-imported vehicles?

Parallel-imported vehicle documentation checklist is as follows: 1. Certificate of Imported Goods: Commonly known as customs clearance document. It contains the vehicle name, customs broker (not the sales company), VIN, engine number, production date, etc. All vehicle information is based on this document as it bears the official customs seal and cannot be falsified. 2. Inspection Sheet for Imported Motor Vehicles: Commonly called commodity inspection. Issued after CIQ (China Inspection and Quarantine) inspection, it states the customs broker, VIN, engine number, and bears the quarantine bureau's seal. 3. Compulsory Product Certification (Vehicle Conformity Certificate): For new models, the front shows the conformity certificate while the back contains the environmental compliance list. Older versions have conformity certificates on both sides with environmental lists as separate paper documents. 4. Invoice: Some come in triplicate, others in quadruplicate. It states the vehicle's invoiced price and taxpayer information. 5. Vehicle Purchase Tax Declaration Form: After the dealer issues the invoice, this information gets uploaded. The electronic information QR code can usually be printed from the "China Automotive Technology and Research Center" self-service system within 48 hours after invoice issuance.

15

0

Share

What is aeolus car?

Can tires with small cracks after five years but minimal wear still be used?

What Are the Most Practical Freebies to Ask for When Buying a Car from a 4S Shop?

Is the Launch Gear in Toyota CVT Transmission Useful?

What do the internal and external air circulation modes in a car mean?

Does the Avalon use Aisin 8AT?

What are the documentation requirements for parallel-imported vehicles?

Has Mustang Motors ceased production?

How are vehicle classes divided into ABCD?

What is a stallion car?

What are the maintenance items for electric vehicles?