What is a yard car?

What are the differences between imported and domestically produced Range Rover Evoque?

The latest model of domestically produced Evoque currently on sale is the 2020 version, while the latest imported Evoque on sale is the 2018 version. Taking these two models as examples, the specific differences include the following 5 points: 1. Different body dimensions: The imported Evoque measures 4370x1965x1609mm in length, width, and height, with a wheelbase of 2600mm; the domestically produced Evoque measures 4371x1904x1649mm, with a wheelbase of 2681mm. 2. Different sales prices: The imported Evoque is more expensive than the domestically produced one. 3. Different power: The imported Evoque is equipped with a 2.0T inline 4-cylinder turbocharged engine, matched with a 9-speed automatic transmission, with a maximum power of 177KW and a maximum torque of 340N·m; the domestically produced Evoque is equipped with a 2.0T inline 4-cylinder turbocharged engine, matched with a 9-speed automatic transmission, with a maximum power of 183KW and a maximum torque of 365N·m. 4. Different body types: The imported Evoque is a 2-door 4-seat SUV, while the domestically produced Evoque is a 5-door 5-seat SUV. 5. Different configurations: The imported Evoque uses LED light sources for both high and low beams, while the domestically produced Evoque, except for the Dynamic version, all models use xenon light sources.

20

0

Share

What is the normal tire pressure for Mercedes-Benz e300?

The normal tire pressure for Mercedes-Benz e300 is approximately between 2.4bar and 2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure for Mercedes-Benz E-Class will be displayed on the multifunction display screen. After driving for a few minutes, the current tire pressure of each tire will be shown in the maintenance menu of the multifunction display. Generally, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating localized wear of the central tread pattern, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity, increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, posing safety risks; increased movement of various parts of the tire, leading to abnormal heating due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage, excessive friction with the rim, damaging the bead area, and abnormal wear; exponentially increased friction between the tire and the ground, rapidly rising tire temperature, softening of the tire, and sharp decline in strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator lights up (a yellow symbol, an irregular circle without a seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm will sound if the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator will light up. At this time, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to come on. For sensor damage issues, only a new replacement can be installed.

13

1

Share

Will running a red light on a motorcycle result in penalties?

Running a red light will be captured by electronic surveillance cameras because motorcycles are classified as motor vehicles. According to Article 2 of the "Scoring Standards for Road Traffic Safety Violations," running a red light will result in a deduction of 6 points. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to move when the red light is on, prohibiting passage. Determining a red-light violation requires at least three pieces of photographic evidence: the vehicle not having left the stop line when the red light is on; the vehicle passing through the intersection when the red light is on; and the vehicle having crossed the line and continuing to move forward when the red light is on. Common scenarios of running a red light: When the red light is on, if the front wheel touches the stop line but the vehicle stops immediately, it is not considered running a red light. However, if the vehicle continues to move, it will be counted as running a red light. According to Article 3 of the "Scoring Standards for Road Traffic Safety Violations," if a vehicle completely crosses the stop line and stops on the pedestrian crossing after the red light turns on, this is not considered running a red light but is classified as over-the-line parking, which incurs a 3-point deduction. If the vehicle moves noticeably on the pedestrian crossing or obstructs pedestrian passage, it will be judged as running a red light. If the front wheel crosses the stop line and then reverses back behind the stop line when the red light is on, this constitutes illegal reversing, which may result in a fine. If this causes a rear-end collision, the driver will bear primary responsibility. If the vehicle crosses both the stop line and the pedestrian crossing and reaches the opposite side of the intersection after the red light turns on, this is considered running a red light. Ways to avoid running a red light: Follow arrow signals if available; otherwise, observe the circular light. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light starts flashing, if the vehicle is close and moving fast, it should proceed, as braking may not stop it in time to avoid crossing the stop line. If the vehicle is far away, moving slowly, or the intersection is congested, it should stop. When driving in the city, develop the habit of looking for traffic lights whenever approaching a crosswalk, stop line, or intersection.

11

2

Share

How Many Chances Are There for Subject 2 Test?

For the Subject 2 test, if you fail the first attempt, you are allowed one retake. If you do not take the retake or still fail the retake, the current test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduled attempts for Subject 2 and Subject 3 road driving skill tests must not exceed five. If the fifth rescheduled test is still failed, the passing scores of other subjects will be invalidated. The full score for Subject 2 is 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed if the following conditions are met: ① For applicants of large passenger vehicles, tractors, city buses, medium passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for large vehicles (A1, A2, A3, B1, B2) include: pile test, slope fixed-point parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, limited-width gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. The test items for small vehicles (C1, C2) include: reversing into a garage, parallel parking, slope fixed-point parking and starting (C2 has been canceled), right-angle turning, and curve driving (commonly known as S-curve)—five mandatory items (some regions include a sixth item: highway toll card collection).

9

3

Share

Can a Temporary ID Card Be Used for the Subject 1 Test?

A temporary ID card can be used for the test. The admission ticket and other documents are handled by the driving school, which will distribute them during the test. Electronic ID cards cannot be used for the test. If you do not have an ID card, you can apply for a temporary one, which holds the same validity as a formal ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the Subject 1 test can be taken twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the Subject 1 test will be terminated, and you can only reschedule the test after ten days. The Subject 1 test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point and a total score of 100. If you answer 11 questions incorrectly during the test, the system will automatically submit the paper and end the test. The Subject 1 test is computer-based and lasts 45 minutes. Subject 1 Test Content: Regulations on driving licenses and motor vehicle management; road traffic conditions and regulations; traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and cargo vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 Test Notes: During the test, students should pay attention to their attire—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, the identity verification station will assign a seat. Once seated, begin the test, ensuring the camera is aligned with you and adhering to test discipline. If you fail the first attempt, you can retake it on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it, the test will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five test attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. There are three subjects in the driving test: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 consists of two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include Subject 4.

9

4

Share

What is the tire size of the Golf car?

There are three types of Golf tire sizes: 225/45R17, 205/55R16, and 225/40R18. The numbers 205 and 225 represent the tire's section width in millimeters (205mm and 225mm, respectively). The numbers 45, 55, and 40 represent the tire's aspect ratio. The letter R stands for radial tire. The numbers 17, 18, and 16 represent the rim diameter in inches. The Golf uses Hankook tires. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, but do not completely remove them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are snug. The tire replacement is now complete. In addition to the size, the following common data is marked on the tire: Tire carcass ply material: Indicated by Chinese pinyin, such as M for cotton ply, R for rayon ply, N for nylon ply, G for steel ply, and ZG for steel radial ply tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F."

2

0

Share

What is a yard car?

What are the differences between imported and domestically produced Range Rover Evoque?

What is the normal tire pressure for Mercedes-Benz e300?

Will running a red light on a motorcycle result in penalties?

How Many Chances Are There for Subject 2 Test?

Can a Temporary ID Card Be Used for the Subject 1 Test?

What is the tire size of the Golf car?

What is the act of crossing double solid lines?

How to Match a Toyota Key?

What Causes the Squealing Noise When Braking?

How many seconds should the turn signal be on?