What is a Vehicle Certificate Number?

What is the correct way to install a license plate?

The correct way to install a license plate is: 1. Prepare the screw components and screw all the fixing screw components according to the fixing points of the license plate; 2. Align the license plate with the car's fixing points, straighten and align it, insert the screws into the holes, but do not tighten them; 3. Check that the license plate is in the correct position and tighten all the screws; 4. Press the cap onto the spacer to fix it, and the installation is complete. License plates, commonly known as tags, also refer to vehicle license plates, which are plates hung on the front and rear of the vehicle. They are usually made of aluminum, iron, plastic, or paper, and are engraved with the vehicle's registration number, registration area, or other relevant information.

17

5

Share

How to reset the tire pressure warning light on the car?

The method to reset the tire pressure warning light on the car is: Press and hold the SET button with the tire pressure symbol located at the front of the gear lever. The reasons for the tire pressure warning light appearing on the car are: 1. Tire leakage; 2. Tire pressure too high or too low; 3. System false alarm. Common warning lights on the car include: 1. Engine fault warning light; 2. Low oil or low oil pressure warning light; 3. ABS system fault light; 4. Brake system fault light; 5. Seat belt indicator light; 6. Low fuel warning light; 7. Battery and charging system fault light; 8. Trunk lid open and engine hood open warning lights.

10

4

Share

What is car gear dragging?

Car gear dragging occurs due to: 1. Aging of the gear shifting mechanism; 2. Aging of the synchronizer; 3. Poor driving habits that cause long-term damage to the vehicle. The symptoms of car gear dragging include: 1. The engine sound becomes muffled; 2. Slow response and lack of speed when accelerating; 3. The car jerks forward and backward when releasing the accelerator. Car gear dragging refers to the mismatch between the gear position and the actual driving conditions, which can be divided into: 1. Low gear high drag: Forces the engine to operate at excessively high RPM, putting undue pressure on engine components; 2. High gear low drag: The engine RPM is too low, resulting in weak power output and a tendency to stall.

19

4

Share

What is the difference between water and antifreeze?

The differences between water and antifreeze are: 1. Different freezing points: The freezing point of water is 32 degrees; the freezing point of antifreeze is -40 degrees. 2. Different boiling points: The boiling point of water is 100 degrees Celsius; the boiling point of antifreeze is 108 degrees Celsius. 3. Different functions: Water can cause rust in the engine's water passages and lead to scale buildup; antifreeze prevents the coolant from freezing and cracking the radiator when parking in cold winter. Antifreeze is a coolant containing special additives, mainly used in liquid-cooled engine cooling systems, with excellent properties such as preventing freezing in winter, preventing boiling in summer, and preventing scale and corrosion all year round. The boiling point of water is 100 degrees Celsius. When the temperature reaches 100 degrees Celsius, water evaporates into steam and cannot serve as a coolant.

11

0

Share

What are the causes of transmission failure?

The causes of transmission failure include: 1. Excessive transmission oil temperature, leading to stubborn dirt and impurities forming blockages, causing solenoid valves to operate poorly and fail to regulate oil pressure; 2. Wear or severe wear of internal transmission components, or damage to gear side surfaces; 3. Hardening and aging of transmission rubber sealing materials, resulting in leaks and reduced hydraulic pressure. The functions of a transmission are: 1. To change the transmission ratio and expand the range of torque and speed variation of the driving wheels; 2. To enable the vehicle to reverse while maintaining the engine's rotation direction; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitate gear shifting or power output.

16

1

Share

Can front fog lights be installed on a car?

Front fog lights cannot be installed on a car. From a legal perspective, private vehicle modifications are not allowed. If you want to modify fog lights, it is recommended to go to a 4S shop or a certified modification shop with a warranty, and choose original fog lights that match the vehicle model. During installation, pay attention to circuit safety issues such as switches, relays, fuse strips, and aftermarket lighting. Fog lights are yellow with a longer wavelength, which allows them to illuminate over a greater distance, providing better visibility in adverse weather conditions. The benefit of fog lights is this. Whether or not to install them is up to the owner. When purchasing a car, it is advisable to buy one with LED lights, which can not only directly replace fog lights but also indirectly enhance the car's grade.

10

2

Share

What is a Vehicle Certificate Number?

What is the correct way to install a license plate?

How to reset the tire pressure warning light on the car?

What is car gear dragging?

What is the difference between water and antifreeze?

What are the causes of transmission failure?

Can front fog lights be installed on a car?

What Causes Intermittent Engine Misfiring in Cars?

How to Remove the Steering Wheel?

Where is the Roewe RX5 MAX engine produced?

How to Determine When to Clean the Throttle Body?