What is a Transmission Valve Body?

1 Answers
LeEvelyn
09/03/25 3:10am
About the introduction of transmission valve body: 1. The transmission valve body can be used for shifting between high and low gears. When the vehicle speed reaches a certain gear speed, the hydraulic oil pushes the valve body to automatically shift to that gear. The automatic transmission can automatically change the transmission ratio based on factors such as engine load and vehicle speed, providing the car with good power performance and fuel economy, while also reducing engine emissions. 2. The automatic transmission is easy to operate, significantly improving driving safety and reliability in heavy traffic. An electronically controlled automatic transmission typically consists of five parts: a torque converter, planetary gear transmission system, shift actuator, hydraulic control system, and electronic control system.
Was this review help?
5
1
Share
More Forum Discussions

Can I apply to change an out-of-town license plate to a local one on 12123?

Out-of-town license plate change to a local one can be processed on the Traffic Management 12123 platform. On the 12123 software, select the application for motor vehicle transfer. Once the online application is approved by the corresponding traffic management department, you will receive a notification. When the electronic files arrive at the local vehicle management office, bring your ID card, driving license, and the motor vehicle registration certificate to the corresponding vehicle management office to complete the re-registration procedures for the vehicle. After selecting a new license plate, the process of changing an out-of-town license plate to a local one is completed. Materials required for changing an out-of-town license plate to a local one include: proof of ownership and credentials for the motor vehicle undergoing transfer registration; motor vehicle registration certificate; motor vehicle files (verifiable through computer network); original and photocopy of the identity proof of the motor vehicle owner; legal proof and credentials of the motor vehicle owner's residence moving into the city. When transferring an out-of-town license plate back to a local one, it is important to note that before applying for the transfer, you must ensure that all traffic violations of the vehicle have been completely resolved. Additionally, check the local emission standards for vehicle relocation. If the emission standards do not meet the local requirements, the vehicle cannot be transferred from out-of-town to local.
6
3
Share

Are the Three Major Components of the Shuake from Nissan?

The engine of the Shuake car belongs to Nissan. The Shuake car is a domestic vehicle of a Japanese brand. Below are detailed introductions about the Shuake car: 1. Overview: The new Shuake has significant changes in the front face. Its front grille features dual chrome-plated horizontal bars, and the headlights have been completely redesigned. Additionally, high-end models are equipped with LED daytime running lights and front fog lights on both sides of the front bumper. Moreover, the new car still adopts a sliding door design, with side turn signals integrated into the exterior rearview mirror covers. 2. Powertrain: The new Shuake is equipped with a 1.6L and a 1.5L engine, with the 1.5L engine featuring new ISS intelligent start-stop technology. The maximum power is 75kW/6000rpm, and the maximum torque is 135Nm/4400rpm.
19
2
Share

How to Handle Obstacles on the Left When Parallel Parking?

Solutions for encountering obstacles on the left when parallel parking: 1. Get as close to the parking space as possible when passing by: When driving past a parallel parking space, the vehicle should be closer to the space than in a spacious area. The appropriate proximity depends on the position of the obstacle on the left. If there is no additional space on the left, try to get as close to the parking space as possible, but not too close, as extreme proximity may cause the side mirrors to scrape. 2. Swing the front of the car to the left when passing the parking space: As the rear wheels are about to pass the parking space, turn the steering wheel sharply to the left, commonly referred to as swinging the front of the car to the left. 3. Maintain a certain distance between the front of the car and the obstacle on the left: Most vehicle models have a front overhang (the distance from the center of the front wheels to the frontmost point of the car). Therefore, when moving forward to the left, do not get too close to the obstacle on the left, as this may cause the front of the car to scrape against the obstacle when reversing. For vehicles with a longer front overhang, it is especially important to leave more space to ensure sufficient room for the front of the car when reversing.
12
1
Share

How to Remove Adhesive Residue from a Car?

Methods to remove adhesive residue from a car are as follows: 1. Use a soft cloth soaked in alcohol to wipe; 2. Use a soft cloth soaked in gasoline to wipe; 3. Apply Wanhua oil or essential balm to the adhesive area, then wipe with a cloth; 4. Purchase a specialized adhesive remover for cleaning; 5. Use a hair dryer on the hot setting to blow air onto the adhesive area, and once the adhesive softens, peel it off or wipe it away. Methods to treat scratches on a car are as follows: 1. Hairline scratches: For hairline scratches, polishing or applying a rubbing compound is usually sufficient to remove them. Simply wiping gently can make the scratches disappear. 2. Light scratches: For light scratches, just prepare a tube of toothpaste. Toothpaste is very effective for shallow scratches that haven’t damaged the car’s primer, especially for removing residue from another vehicle’s paint or marks left by sticky products like adhesive tapes. Most of these marks can be wiped clean. 3. Moderate to deep scratches: Moderate and deep scratches cannot be repaired by polishing. For small dents not exceeding 5mm, they can be filled with putty to level the surface, followed by touch-up painting.
16
4
Share

How to Clean Fabric Seats in a Car?

Methods for cleaning fabric seats in a car: You can choose to use a long-haired brush or a vacuum cleaner for dust removal, and using both together yields better results. Below are some car maintenance tips: 1. Conduct tire pressure checks: Correcting tire pressure is one of the most important aspects of car safety checks. Low tire pressure can lead to abnormal wear or internal damage to the tire, while excessively high pressure can make the tire and wheel rim more susceptible to deformation from impacts on uneven road surfaces, and may even cause a blowout. Liu Song specifically reminds car owners to check tire pressure regularly, as tires expand with heat and contract with cold. With the recent cooler weather, all car owners are advised to perform tire pressure checks. 2. Wash your car even in rainy weather: Washing your car in the rain is not just because the car gets dirty, but more importantly to protect the car's paint. Many car enthusiasts frequently wash their cars to remove dirt, tar, resin, and other substances adhering to the paint surface, keeping the paint smooth.
14
0
Share

What car series does the Geely Meiri brand belong to?

It belongs to Geely's compact car series. Here are the specific details about the Geely Meiri: 1. Exterior: The Geely Meiri's exterior is not stingy, featuring a bold front face and headlights that look full of vigor, giving the car a lively appearance. The addition of a rear spoiler lends it a somewhat sporty 'character.' Unfortunately, Geely should put more effort into craftsmanship, as the paintwork and sheet metal quality are noticeably lacking. In well-lit environments, the brightness differences between paint surfaces are clearly visible. There are also noticeable gaps between the side and front chrome-plated rubbing strips and the body. 2. Interior: Geely appears quite generous with the interior, offering wood trim, a tidy dashboard, air conditioning, electric mirrors, power windows, and central locking—all in a light-colored interior that looks relatively fresh. However, the rough craftsmanship and component gaps large enough to fit a 'little finger' are quite 'disappointing.' 3. Braking: The braking system uses front disc and rear drum brakes, without ABS. However, it is equipped with a load-sensing proportioning valve, which adjusts braking force based on weight. This feature is not very effective in actual driving, as it cannot effectively prevent wheel lock-up. Given the Meiri's 870kg body weight, tailspin is highly likely during emergency braking, especially in poor conditions, making the lack of ABS a significant drawback.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.