What is a reflector light?

1 Answers
KaydenDella
07/30/25 8:48am
A light that uses a reflector to concentrate intense illumination, primarily used on stages or tall buildings. Introduction to reflector light troughs: A reflector light trough consists of one or a group of lights, with multiple units forming a light strip. Function of reflector light troughs: They can be installed on ceilings or walls, utilizing reflections from these surfaces to create even and soft indoor lighting, while also serving as decorative elements within architectural features. Lateral reflective suspended ceiling: This technique uses wall reflections to create lateral surface lighting, reducing wall shadows and enhancing spatial structure perception. Parallel reflective suspended ceiling light troughs are commonly used in theaters, with the light trough openings aligned with the audience's line of sight, producing soft light that increases perceived ceiling height and prevents glare. Semi-indirect reflective suspended ceiling light troughs employ translucent or diffusive materials, allowing reduced distance between the trough and ceiling.
Was this review help?
12
3
Share
More Forum Discussions

Why does only one reversing light on the Hongqi H5 illuminate?

This is a normal phenomenon because when reversing, the driver's side visibility is hardly affected, and the brake lights and width marker lights are generally sufficient for clear observation. Precautions for reversing a car are as follows: 1. Adjust the interior rearview mirror properly. Due to differences in height, the rearview mirror needs to be adjusted in a timely manner to avoid obstructed visibility when looking directly behind. 2. Pay attention to both left and right side mirrors simultaneously. When reversing, in addition to checking the interior rearview mirror, also monitor the left and right side mirrors to prevent the vehicle from hitting other cars or objects on either side. 3. Control the vehicle speed. Novice drivers must control the speed when reversing, as this is the prerequisite for safety. Otherwise, excessive speed increases the likelihood of accidents.
20
3
Share

Why won't the motorcycle start after overheating?

Due to high summer temperatures, after the engine shuts down, the motorcycle remains stationary with the engine temperature very high. The temperature around the engine is significantly higher than the ambient air temperature. Excessive temperature accelerates the vaporization of gasoline, resulting in an overly rich combustible mixture, making the engine difficult to start. Troubleshooting: Before parking, choose a cool and well-ventilated location. Alternatively, temporarily reduce the size of the main jet to prevent an overly rich combustible mixture during startup. Below are relevant details: Check the spark plug: After encountering this issue, it is advisable to inspect the spark plug. If the spark plug is faulty, it should be replaced immediately, as a damaged spark plug can affect engine ignition. Generator damage: If there are no issues with the ignition system, the problem may lie in the power supply system. If the generator is damaged, it needs to be replaced immediately.
4
2
Share

What is the correct way to depress the clutch?

The correct way to depress the clutch: 1. Quick release: Quickly release the pedal at the beginning, then slow down the release speed when the clutch reaches the semi-engagement point; 2. Slow release: During the process from engagement to full connection, gradually release the pedal; 3. Accelerator application: While releasing the clutch pedal, gradually press the accelerator pedal according to the engine resistance to ensure smooth vehicle starting. The clutch pedal should be controlled using the ball of your foot. When depressing the clutch pedal, place the ball of your foot on the pedal with your heel touching the ground. Keep your knees slightly bent when the clutch is fully depressed. Avoid using your toes to press the pedal or lifting your heel off the ground to prevent insufficient force or slipping.
3
3
Share

What is the purpose of adding urea to trucks?

Trucks use urea primarily to reduce harmful nitrogen oxides in exhaust gases into nitrogen and water. Below is a detailed introduction to vehicle urea: 1. Principle: The main harmful substances in exhaust are nitrogen oxides and particulate matter. While particulate emissions can be reduced through technical means inside the engine, nitrogen oxides remain predominant in the exhaust. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia gas under high temperatures. In the presence of a catalyst, the ammonia reacts with nitrogen oxides to produce harmless nitrogen and water. This system is called the SCR (Selective Catalytic Reduction) after-treatment system. 2. Urea consumption: Vehicles are equipped with a dedicated urea tank. As long as the vehicle is running, urea will be consumed, so it needs to be replenished regularly. Generally, about 4 liters of urea are consumed per 100 liters of diesel. The exact consumption depends on factors such as engine displacement, model, manufacturer, etc. Different road conditions and varying loads can also affect urea consumption.
19
0
Share

Can the steering gear be repaired?

The steering gear can be repaired. If the steering gear is damaged, it must be repaired. It is best to repair it if possible; if not, replace the entire assembly directly. It is advisable to use original equipment manufacturer (OEM) parts for replacement to ensure quality, as this directly affects driving safety. Hazards of a damaged steering gear: If the steering gear is damaged, it may lead to difficulty in steering, failure of power steering, the steering gear locking up and preventing turning, and indirectly causing abnormal tire wear. Precautions for the steering gear: Regularly check the oil level in the oil reservoir to ensure it does not fall below the lower mark on the dipstick. If the power steering system runs out of oil, the pressure pump may be ruined. Change the oil periodically, avoid turning the steering wheel to its extreme limits, and try not to turn the steering wheel while the vehicle is stationary.
20
3
Share

How to activate the voice control function in Lavida Plus?

The intelligent voice control function of Lavida Plus is located on the steering wheel, and can be activated by following the prompts. Here is an introduction to Lavida Plus: 1. Interior: The comfort of Lavida Plus well meets the needs of most families. The suspension is soft, and the sound insulation is excellent. Engine noise is minimal inside the cabin across the entire RPM range. 2. Powertrain: Lavida Plus is equipped with a new engine from the EA211 series, a 1.5L naturally aspirated engine with a maximum horsepower of 116 HP and a maximum torque of 150 Nm, paired with a 5-speed manual or Aisin 6-speed automatic transmission. 3. Features: Lavida Plus comes standard with an automatic start-stop system and Auto-Hold function. However, the base model does not include a multimedia screen; instead, there is only a phone holder in place of the touchscreen.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.