What is a pedal?

Where to Clean the Air Conditioning Evaporator of BMW X5?

To clean the air conditioning evaporator of BMW X5, start from the ventilation inlet of the evaporator. Insert the nozzle of the cleaning gun into the evaporator through the ventilation inlet, spray the cleaning agent onto the evaporator to decompose the dirt inside, wait for about 3 minutes, then rinse the evaporator with the cleaning agent. After rinsing, use compressed air to dry the moisture on the evaporator. The BMW X5 is the first four-wheel-drive SUV model of the BMW brand, with a wheelbase of 2975mm, a weight of 2200 kg, a top speed of 243 km/h, front-engine four-wheel drive, and a displacement of 2.0 or 3.0L.

8

5

Share

Is the front axle of the Toyota Corolla a drive axle?

The Toyota Corolla does not have a front axle. The front suspension is a MacPherson independent suspension, and front-wheel drive is achieved through left and right drive shafts (connected with CV joints and ball joints in the middle). The MacPherson suspension is one of the most widely used front suspensions for sedans, consisting of a coil spring, shock absorber, and lower control arm. The Corolla is the tenth-generation straight-line upgrade product of the Toyota COROLLA, with a body length, width, and height of 4540mm, 1760mm, and 1490mm respectively. The vehicle is equipped with an inline four-cylinder 1.8L engine featuring dual VVTi technology. Paired with either a 6-speed manual transmission or a 4-speed automatic transmission, the maximum power output reaches 103kw.

16

4

Share

Is it okay to store alcohol in the car?

Alcohol can be stored in the car, but it is not recommended for car owners to place medical alcohol inside the vehicle. This is because medical alcohol typically has an alcohol concentration of 75%, making it a dangerous flammable and explosive substance. If the temperature inside the car becomes too high, it may lead to combustion. If disinfection is necessary, it is advisable to find an open area to wipe the car interior with alcohol for disinfection, while ensuring proper ventilation inside the car for a period of time. If alcohol must be stored in the car, the owner should take adequate safety precautions beforehand. Use a leak-proof, pressure-resistant, and impact-resistant sealed container to package the alcohol, and avoid storing it for too long to prevent accidental safety incidents.

10

1

Share

Where is the oil dipstick located on the BYD Qin?

The BYD Qin does not have a traditional oil dipstick. Instead, it is equipped with an electronic oil dipstick. An oil level sensor is installed at the oil pan to measure the oil level. You can find the oil dipstick display by using the up and down buttons on the steering wheel. The oil level should be maintained at three-quarters between the MAX and MIN marks on the display. It is recommended to check the engine oil level every time you refuel. For an accurate reading, the engine oil should not be cold, and the vehicle should be parked on a level surface. The BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd. as part of its second-generation DM series. The vehicle measures 4740mm in length, 1770mm in width, and 1480mm in height, with a wheelbase of 2670mm.

3

1

Share

What Causes the Zizzing Sound When Pressing the Accelerator in a Car?

The reasons for the zizzing sound when pressing the accelerator in a car: 1. It could be the sound from the fuel pump or related components; 2. Damaged clutch release bearing: If the abnormal sound comes from the clutch area, pay attention to the wear of the clutch. Try pressing the accelerator. If the car runs normally but does not accelerate, it is a clear sign of slipping, possibly due to worn clutch plates. If there is a sand-like sound, the clutch release bearing may already be damaged; 3. Loose engine belt: A slipping belt will produce a zizzing sound, causing friction and high temperatures, which in turn make the belt stretch further, leading to more severe slipping and a vicious cycle. It is recommended to visit a repair shop to adjust or replace the belt.

13

2

Share

What is the cause of heel and toe wear on tires?

Tire heel and toe wear is a type of localized wear that often occurs on tires with lateral tread patterns and block tread patterns. The blocks on the tread surface experience diagonal wear, eventually becoming jagged. Causes of wear: The tires on non-driven wheels are only affected by braking force and not by driving force, which often leads to heel and toe wear. For example, repeated use and release of the brakes can cause the tires to slide short distances each time, resulting in wear. If the tires are on driven wheels, the wear caused by driving force will appear in the opposite direction of the wear caused by braking force, so heel and toe wear is rare on driven wheel tires. For buses and large trucks, much greater friction is generated during braking, so tires with lateral tread patterns will exhibit heel and toe wear similar to that on non-driven wheels.

17

1

Share

What is a pedal?

Where to Clean the Air Conditioning Evaporator of BMW X5?

Is the front axle of the Toyota Corolla a drive axle?

Is it okay to store alcohol in the car?

Where is the oil dipstick located on the BYD Qin?

What Causes the Zizzing Sound When Pressing the Accelerator in a Car?

What is the cause of heel and toe wear on tires?

What is the length of the 2019 Camry?

Is the Buick Excelle equipped with a three-cylinder engine?

What to do when the first maintenance time is up but the mileage is not?

What does a major car maintenance refer to?