What is a Passenger Car Quota?

1 Answers
DelLena
07/29/25 9:34pm
Here is the relevant introduction about passenger car quotas: 1. Quota: It refers to the meaning of a slot, similar to queuing for a number when dining or buying a house is in high demand. Only with this number can one qualify to purchase. 2. Car quota: It carries the same meaning. Due to the current oversupply of cars, car quotas have emerged. Only with a quota can one buy a car; without it, even if you purchase a car, you cannot get it licensed. 3. Ordinary minibus quota: There are a total of 2,353,439 valid individual application codes and 66,116 valid unit codes. 4. Ordinary passenger car quota: Individual and family quotas account for 95.5% of the annual ordinary passenger car quota allocation, totaling 38,200, with individuals and families participating in the lottery simultaneously; unit quotas account for 4% of the annual quota allocation, totaling 1,600; operational passenger car quotas account for 0.5% of the annual quota allocation, totaling 200.
Was this review help?
17
2
Share
More Forum Discussions

What's the reason for hearing a clicking sound when starting the car but it doesn't start?

The reasons for hearing a clicking sound when starting the car but it doesn't start are: 1. Lack of fuel; 2. Spark plug failure; 3. Incorrect gear position—automatic transmissions need to be in P or N gear to start, while manual transmissions won't start if the clutch isn't pressed; 4. Battery issues or complete depletion of power; 5. Carbon buildup in the engine cylinders. As a wearable part that requires regular replacement, a car battery typically lasts 3 to 4 years, with some higher-performance batteries lasting even longer. Damage to the battery's charge is often caused by the owner's long-term incorrect usage habits, such as using electronic devices in the car for extended periods without starting the engine, which significantly reduces the battery's lifespan.
18
5
Share

How to Start and Turn Off a Car with One-Button Start?

Starting method for a car with one-button start: 1. After the driver sits in the driver's seat, press the start button once to turn on the ACC light, then press it again for the vehicle to perform a self-check; 2. Press the brake and push the one-button start key to ignite and start the engine; 3. Release the foot brake, and you can choose to warm up the car in place; 4. Press the foot brake again, shift to D gear, and release the handbrake; 5. Slowly release the foot brake, press the accelerator slightly, and the car will start moving. Method to turn off a car with one-button start: 1. Press the brake to bring the vehicle to a smooth stop; 2. Shift the gear from D to N; 3. Tighten the handbrake; 4. Release the foot brake but do not turn off the power; 5. Continue pressing the foot brake and shift the gear from N to P; 6. Release the foot brake and press the one-button start key to turn off the power and complete the shutdown.
16
3
Share

Does the Breeze have one-touch power window functionality?

The Breeze features one-touch power windows, but this function is only available for the driver and front passenger windows, not the rear windows. One-touch power windows refer to a system where the car's window glass can be fully opened or closed with a single press of a button. Vehicles equipped with this function have a two-stage window control switch. The first stage operates like a regular power window, while the second stage allows the window to automatically open or close completely with a single press and release. The Breeze is a compact SUV launched by GAC Honda, with dimensions of 4634mm in length, 1855mm in width, and 1679mm in height, and a wheelbase of 2661mm. It is powered by a 1.5T turbocharged engine with a maximum power output of 142kW, paired with either a CVT transmission or a 6-speed manual transmission.
14
3
Share

How to resolve the low engine oil level warning in Magotan?

The method to resolve the low engine oil level warning in Magotan: After adding engine oil, restart the vehicle to reset the warning. If the oil level reset does not resolve the issue, professional equipment at a repair shop or 4S dealership is required for elimination. Steps to check engine oil level: 1. Park the vehicle on level ground, turn off the engine, and wait for 15 minutes to allow the oil to drain back into the oil pan; 2. First, remove the dipstick, wipe it clean, and slowly reinsert it, ensuring it reaches the bottom of the oil pan; 3. Remove the dipstick again to check the oil level. If the level is between the upper and lower marks on the dipstick, it is normal. If it is above the upper mark, some oil needs to be drained. If it is below the lower mark, the appropriate amount of oil should be added. The Magotan, closely related to the Passat B6, is built on the new MQB B platform. It features not only a fashionable and sporty design but also a series of intelligent technologies surpassing its class, with several high-end configurations exclusive to C-segment vehicles being introduced for the first time.
11
5
Share

What is the fuel tank capacity of the Prado 2700 in liters?

The fuel tank capacity of the Prado 2700 is 87 liters, which is quite decent for a mid-to-large-sized SUV. Fuel tank capacity refers to the volume of the fuel tank and indicates a vehicle's capability to carry fuel. The fuel tank capacity determines the driving range - for two vehicles with identical engines, the one with a larger fuel tank can travel farther. The Prado 2700 is the new 2.7L model in Toyota's Land Cruiser series, representing a completely new generation of SUV. It comes equipped with Toyota's newly developed four-cylinder electronic fuel injection 2TR-FE engine, with a displacement of 2694cc. It delivers excellent power performance and meets the latest Euro III emission standards, making it highly environmentally friendly.
12
1
Share

What is the correct procedure for starting an automatic transmission car?

The correct procedure for starting an automatic transmission car is: 1. After sitting in the driver's seat, the driver does not need to press the brake pedal. Simply press the start button once to activate the ACC light, then press it again for the vehicle to perform a self-check; 2. Press the brake pedal and press the start button once more to ignite and start the engine; 3. Release the foot brake. You may choose to warm up the car in place, with the duration depending on environmental conditions; 4. Press the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly); 5. Before moving, check the road conditions clearly through the rearview mirror to ensure it is safe to start, and also sound the horn and turn on the turn signal to alert other vehicles and pedestrians.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.