What is a jetour car?

1 Answers
DiEmilio
07/24/25 11:03pm
jetour is a JETOUR vehicle, and its models include JETOUR X70, JETOUR X90, JETOUR X70S, JETOUR X70M, JETOUR X95, etc. Taking the 2020 JETOUR X95 as an example, it belongs to a midsize SUV with body dimensions of 4875mm in length, 1925mm in width, and 1780mm in height, a wheelbase of 2855mm, and a fuel tank capacity of 57L. The 2020 JETOUR X95 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 230Nm, paired with a 6-speed manual transmission.
Was this review help?
16
4
Share
More Forum Discussions

Is ETC Required for Free Toll During Holidays?

During legally designated free holidays, passing through highway toll stations is free for all vehicles, regardless of whether they have ETC or not. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, coupled with computer networking technology for backend settlement processing with banks, ETC enables vehicles to pass through highway or bridge toll stations without stopping to pay fees. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes green and low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost reduction: Saves on expenses by minimizing vehicle acceleration and braking frequency, thereby reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
11
0
Share

How to Replace the Air Conditioning Filter in the New BMW 5 Series?

The new BMW 5 Series has two sets of air conditioning filters, and the replacement methods are as follows: 1. One set is located on the passenger side in the engine compartment. Use specialized tools to remove the old filter and replace it with a new one. 2. The other set is in the area outside the passenger's left leg, secured by clips. Use tools to pry it open, remove the old filter, and replace it with a new one. Below are the detailed steps for removing and installing the air conditioning filters: (1) Replacing the filter in the glove compartment: ① Locate the fixing device, usually found below the glove compartment. ② Remove the protective panel, ensuring to loosen the fastening device first. ③ Unscrew the screws on the curved cover, remove the cover, and pull out the air conditioning filter. ④ The filter can be reused if it's not too dirty; cleaning it is also an option. ⑤ Install the new filter. Installation tip: The end with letters usually faces you for correct installation. (2) Replacing the filter in the engine compartment: ① Carefully remove the waterproof rubber strip along the groove, then locate and remove the clips to take off the plastic cover smoothly. ② Now you can see the external filter. Remove the old air conditioning filter and install the new one in the correct direction.
18
1
Share

Can Antifreeze Be Added?

Antifreeze can be added, but it is not recommended to add it directly. Before adding antifreeze to your car, it is necessary to thoroughly clean the engine cooling system, especially during seasonal transitions when the antifreeze should be inspected. If the antifreeze level is insufficient, it should be replenished promptly. Cleaning before adding antifreeze is primarily to prevent chemical reactions between scale deposits in the engine and the antifreeze, as the detachment of scale can affect the normal performance of the antifreeze. Antifreeze is designed to prevent the coolant from freezing during cold winter parking, which could otherwise cause the radiator to crack or the engine cylinder block to freeze. Its full name is antifreeze coolant.
16
5
Share

Is Repose Exhaust Made in China?

Repose exhaust is not domestically produced; it is a brand of exhaust systems based on German technology, headquartered in Munich, Germany. Repose specializes in professional exhaust modifications for major automotive brands such as Mercedes-Benz, BMW, Audi, Volkswagen, Porsche, Jaguar, Maserati, and Land Rover. All Repose exhaust systems can be installed in original positions, and the exhaust tuning for turbocharged models ushers in Repose's unique T-era. Repose tailors its products to the performance characteristics of each model from these major brands, offering the sexy sports car sound of the Ra and Rb series to meet different customers' performance and sound preferences.
4
3
Share

What is the function of car headlights?

Car headlights are used for illumination during night driving. Also known as car front lights or car LED daytime running lights, they serve as the 'eyes' of a vehicle. They not only relate to the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. The use and maintenance of car lights should not be overlooked. There are various lights on a car: the width indicator lights are mainly used at night to display the vehicle's width and length, alerting other drivers and pedestrians to your presence. When visibility is poor through the rearview mirror or during rainy or foggy conditions, turning on the width indicator lights enhances driving safety.
19
5
Share

What are the causes of car steering deviation?

Reasons for car steering deviation: 1. Unequal tire pressure, mainly caused by inconsistent tire pressure in the driving wheels. If the left and right tire pressures are unequal, it will result in different degrees of wear between the driving wheels and the ground, and different friction forces will directly cause steering deviation; 2. Abnormalities in the car's steering system can also lead to steering deviation, such as bending or deformation of the steering knuckle arm or steering knuckle, which generally causes the car to deviate to one side; 3. The use of tires with different tread patterns on both sides or uneven wear on both sides can also result in different friction forces between the tires and the ground, leading to braking deviation.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.