What is a Green License Plate Vehicle?

What Are the Reasons Why a Sagitar Car Won't Start?

The possible reasons why a Sagitar car won't start are as follows: 1. Dead battery; If the power switch has no electricity, the house will lose power, and the same goes for a car. When the car battery is dead, the car will fail to start. There are many reasons for a dead car battery, such as lack of water in the battery, battery failure, or prolonged use of the air conditioning. When the car fails to start, the first step is to check if there is an issue with the car battery, identify the specific problem, and then take it to a 4S shop for repair. 2. Ignition system failure; The function of the car ignition system is to provide high-voltage electricity to the spark plugs at the right time to ensure the normal operation of the car. If the car won't start and the battery is ruled out as the cause, it is highly likely that the car's ignition system is faulty. Poor connection of low-voltage circuit wires or leakage in high-voltage wires can cause ignition system failure, affecting the car and making it difficult to start. 3. Low temperature; In cold winter weather, cars often fail to start. This is because, in low-temperature environments, the viscosity and rotation speed of car engine oil decrease, leading to reduced ignition energy from the battery and decreased molecular activity. As a result, flammable gases cannot form, making it difficult to start the car.

5

1

Share

What does the wrench symbol on the Sagitar dashboard mean?

The small wrench symbol displayed on the dashboard indicates that the vehicle has reached its scheduled maintenance interval, serving as a reminder for required maintenance. The appearance of the "small wrench" on the car dashboard does not signify a vehicle malfunction; it is merely a maintenance reminder indicator. The maintenance cycle is preset during the vehicle's manufacturing, so the "small wrench" symbol will appear at certain mileage intervals to prompt the driver to perform timely maintenance. There are three methods to reset the "small wrench" indicator (code 4102). Therefore, if the vehicle undergoes regular maintenance, you can easily reset the "small wrench" indicator yourself by following these steps: 1. Insert the key into the ignition, but do not turn it (code 1653); 2. Press and hold the trip meter reset button for 5-10 seconds, then turn the ignition to the "ON" position; 3. After another 5-10 seconds, start the engine. Keep holding the reset button throughout this process. Generally, following these steps will clear the small wrench symbol. If it doesn't clear, repeat the process a few times. Note that the reset method may vary depending on the vehicle model, as some models require specialized diagnostic equipment to clear the indicator. If you encounter this symbol, don't panic. Try the above methods first. If unsuccessful, you can visit a repair shop for a free reset.

19

0

Share

Where to Find the Civic's Engine Number?

The Civic's engine number is located on a vehicle identification plate on the right side of the engine compartment. The engine model is marked by the manufacturer in accordance with relevant regulations or industry practices to indicate engine-related information. This includes the engine's manufacturer, specifications, performance, features, technology, intended use, and production batch. The Civic's engine number is found in the engine compartment, with the identification plate displaying the information. Below are the components of the engine number: 1. Prefix: Represents the product series and generation symbols, chosen by the manufacturer with approval from relevant authorities. 2. Middle section: Consists of symbols for the number of cylinders, stroke type, cylinder arrangement, and bore diameter. 3. Suffix: Denotes structural and usage characteristics, represented by letters. 4. Tail: A distinguishing symbol used by the manufacturer to differentiate between products in the same series due to improvements or other reasons.

19

4

Share

Where is the engine of the Territory from?

The engine of the Territory is independently developed with the participation of Jiangling Motors. The Territory is a compact 5-door, 5-seat SUV with body dimensions of 4580mm in length, 1936mm in width, 1674mm in height, a wheelbase of 2716mm, and a fuel tank capacity of 52 liters. The Territory is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 103 kW at 4500-5200 rpm and a maximum torque of 225 N·m at 1500-4000 rpm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.

2

5

Share

How many cylinders does the Ford Territory engine have?

Ford Territory is equipped with a 1.5-liter four-cylinder turbocharged engine. The Ford Territory is a compact SUV under the Ford brand, with dimensions of 4580mm (length), 1936mm (width), 1674mm (height), and a wheelbase of 2716mm. The Ford Territory is a five-door, five-seat SUV model. Here is an introduction to the Ford Territory: 1. The 1.5-liter turbocharged engine of the Ford Territory has a maximum power of 103kW and a maximum torque of 225 Nm. The engine's maximum power is achieved at 4500 to 5200 rpm, and the maximum torque is available from 1500 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The front suspension of the Ford Territory uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension is an improved version based on the double-wishbone suspension, where the two wishbones are replaced with separate links. The multi-link independent suspension enhances the tire's contact with the road.

18

2

Share

What causes the ABS yellow light to illuminate on the dashboard?

There are multiple states in which the ABS light may illuminate, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal quality due to loose system wiring connections or poor contact in the ABS relay, leading to system failure. Solution: Check wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off when the engine speed increases and voltage rises. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: The ABS warning light stays on after engine startup and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also be a factor. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage down to its limit, then release the pedal to complete self-positioning. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.

19

1

Share

What is a Green License Plate Vehicle?

What Are the Reasons Why a Sagitar Car Won't Start?

What does the wrench symbol on the Sagitar dashboard mean?

Where to Find the Civic's Engine Number?

Where is the engine of the Territory from?

How many cylinders does the Ford Territory engine have?

What causes the ABS yellow light to illuminate on the dashboard?

How to Use the Skoda Wiper?

How to Open the Fuel Tank Cap on a Jaguar?

Is the Oil Burning Issue in the Jeep Cherokee Engine Serious?

Is Chevrolet a Domestic or Joint Venture Car?