What is a Fiat car?

Driving Speed and Distance in Foggy Conditions?

When driving in foggy conditions, remember to slow down. The thicker the fog, the shorter the visibility distance, and the lower the speed must be. When visibility is less than 200 meters but greater than 100 meters, the speed should not exceed 60 km/h; when visibility is less than 100 meters but greater than 50 meters, the speed should not exceed 40 km/h; when visibility is within 30 meters, the speed should be controlled below 20 km/h; if visibility is within 10 meters, it is recommended to stop by the roadside. Below is additional information: Precautions for foggy conditions: Maintaining a certain distance between vehicles is crucial when driving in foggy conditions, as the wet and slippery road surface increases the braking distance of vehicles. Therefore, it is essential to keep a safe distance from the vehicle in front to prevent rear-end collisions in case of sudden braking.

5

2

Share

Are Rear Wheels Used for Dynamic Balancing?

Rear wheels of a car are used for dynamic balancing. Situations that require dynamic balancing include: 1. After replacing new tires or repairing following a collision accident. 2. Unilateral wear of front or rear tires. 3. The steering wheel feels excessively heavy or shakes during driving. 4. The car veers to the left or right when driving straight. Below is relevant information about dynamic balancing: Wheel dynamic balancing involves adding counterweights to correct the balance of various edge parts of the wheel while in motion, aiming to maintain a balanced state after the wheel starts rotating. A car's wheel is an assembly consisting of a tire and a rim. However, due to manufacturing reasons, the mass distribution across different parts of the assembly cannot be perfectly uniform. When the car's wheels rotate at high speeds, this can lead to a dynamic imbalance, causing the wheels to shake and the steering wheel to vibrate during driving.

10

1

Share

How many points are deducted for driving in the wrong direction and crossing the line?

The penalty for driving in the wrong direction and then crossing the line is a deduction of 6 or 15 points along with a substantial fine. Below are the relevant details: 1. Penalty for wrong-way driving: If a motor vehicle driver commits any of the following violations, they will be penalized with a deduction of 3 points and a small fine: driving a motor vehicle on a regular road without following overtaking rules, yielding, or driving in the wrong direction. If a motor vehicle driver commits any of the following violations, they will be penalized with a deduction of 12 points and a fine: driving a motor vehicle in reverse, driving in the wrong direction, or crossing the central divider on a highway. 2. Penalty for crossing the line: Driving a motor vehicle over a solid line: a deduction of 3 points and a small fine.

3

2

Share

Must You Shift to First Gear Every Time You Stop?

Must you shift to first gear every time you stop? Below are the reasons why you should shift to first gear when stopping: 1. Starting in First Gear: When driving, starting in first gear is common because first gear provides the highest torque, making it ideal for moving a stationary vehicle. 2. Starting in Second Gear: If you start in second gear, the torque will be insufficient. Here is additional information about automatic transmission gear positions: 1. All Gear Positions: Automatic transmissions have the following gear positions: P, R, N, D, 2 or S, L or 1. 2. Parking Gear: P stands for Parking gear, also known as the Park position. 3. Other Gear Positions: R is Reverse, N is Neutral, and D is Drive, also known as the driving gear. 4. Sport Mode: S or 2 represents Sport mode. 5. Low Gear: L or 1 is Low gear, also referred to as first gear.

17

4

Share

Which manufacturer produces Lynk & Co sedans?

Lynk & Co 01/01 PHEV is produced at the Luqiao factory located in Taizhou. The Luqiao manufacturing base is invested by Zhejiang Geely Holding Group, constructed according to Volvo Cars' technology and standards, and managed and operated by Volvo Cars. This base also produces Volvo models such as the CX40, and the Lynk & Co 01 is produced on the same production line as the Volvo XC40. Details about Lynk & Co cars are as follows: 1. In terms of appearance, the front grille and headlights are integrated into a single design, spanning the entire front fascia, creating a strong visual impact. The horizontal slats of the grille give the front end a more stable appearance, while the LED daytime running lights are positioned above the headlights in a split layout, making it highly distinctive. 2. In terms of technology and features, the Lynk & Co 01 boasts four leading advantages: seamless connected car mobile internet technology, globally leading safety technology, a rich and forward-looking electrified powertrain system, and an exceptional driving experience. 3. The Lynk & Co 01 offers the most comprehensive powertrain combination in its class, featuring shared Volvo 1.5T and 2.0T turbocharged direct-injection engines, as well as a plug-in hybrid system based on the 1.5T engine and lithium-ion battery technology. It is paired with a 6-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission. Future models will also include a four-wheel-drive system to meet consumers' diverse power needs.

6

0

Share

What are the road markings in Subject 1?

Subject 1 road markings include solid and dashed lines, variable guide lane lines, and distance confirmation lines. Here are the specific details: 1. Solid and dashed lines: Dashed lines generally indicate that the road can be crossed, while solid lines indicate that the road cannot be crossed. Special attention should be paid to areas near traffic lights where the road markings change from dashed to solid. Once a vehicle crosses the dashed line, it must not cross further. 2. Variable guide lane lines: These are road lines with directional signs in front of pedestrian crossings. A single solid line with a directional sign is a guide lane line. Lines with zigzags and no directional signs are variable guide lane lines, indicating that there is more than one lane direction after entering the lane, such as intersections that allow right turns and straight driving. Variable guide lanes offer flexibility, unlike ordinary lane indicator lines, where entering a straight lane means going straight, and a left-turn lane means turning left. Such lanes are usually set up in areas with complex traffic conditions. 3. Distance confirmation lines: These are thick white parallel solid lines used to provide drivers with a reference for maintaining a safe driving distance, and they are used in conjunction with distance confirmation signs. They are set up in areas where overtaking frequently occurs, where accidents are prone to happen, or in other necessary sections. The purpose of highway distance confirmation markings is to remind drivers to maintain a safe distance from the vehicle in front when they see these markings to avoid traffic accidents.

4

0

Share

What is a Fiat car?

Driving Speed and Distance in Foggy Conditions?

Are Rear Wheels Used for Dynamic Balancing?

How many points are deducted for driving in the wrong direction and crossing the line?

Must You Shift to First Gear Every Time You Stop?

Which manufacturer produces Lynk & Co sedans?

What are the road markings in Subject 1?

What is the service life of a car?

Why has smart been discontinued?

What happens if a motorcycle's insurance is expired and caught by traffic police?

What should be considered when choosing engine oil for turbocharged cars?