What is a DSP in cars?

Is a Tiptronic Transmission the Same as an AT Transmission?

A Tiptronic transmission is not the same as an AT transmission. A Tiptronic transmission combines manual and automatic functions, simulating a manual mode that operates similarly to an AMT (Automated Manual Transmission) when in manual mode, whereas an AT transmission is purely automatic. Below are further details on AT transmissions versus Tiptronic transmissions: 1. AT stands for Automatic Transmission, which translates to hydraulic automatic transmission in Chinese. Hydraulic automatic transmissions achieve shifting through a combination of hydraulic drive and planetary gears, typically consisting of components such as a torque converter, planetary gear mechanism, shift actuators, shift control system, and shift operation mechanism. 2. A Tiptronic transmission is a gear-shifting device that integrates both manual and automatic functions, allowing drivers to freely adjust gears and engine speed based on their preferences.

16

1

Share

How to Deal with Windshield Glare?

Here are solutions to reduce glare: 1. Replace the front windshield film with one that has higher light transmittance. According to national standards, the visible light transmittance of films for the front windshield and other areas within the driver's line of sight must be ≥70%. Mirror-reflective films are prohibited on all car windows. Films with low transmittance tend to cause more glare. When purchasing, check the labeled transmittance and reflectivity. 2. Purchase an anti-glare dashboard mat online and place it on the dashboard to minimize reflections. However, this solution has pros and cons, and whether to use it depends on personal preference. Advantages of anti-glare dashboard mats: 1. They reduce dashboard reflections by absorbing sunlight instead of reflecting it. 2. They prevent dust accumulation on the dashboard, making cleaning easier. 3. They protect the dashboard from sun exposure, reducing the risk of cracks and aging. 4. They are affordable and effective.

7

3

Share

What is the flashing red light after locking the car?

Locking the car after the red light is the anti-theft light, usually located at the lower part of the front windshield, at the intersection with the A-pillar. Generally, when the owner presses the lock button on the smart key, the car's anti-theft system is activated, and then the anti-theft light will flash. The anti-theft light is not only red; some models have blue lights. The power consumption of the engine anti-theft light is very minimal, almost negligible, so there is no need to worry about battery drain. The engine anti-theft technology works by shutting down or deactivating all systems in the car before unlocking. Even if someone forcibly starts the starter motor in the engine, the EFI system will not inject fuel, and the ignition system will not work, making it impossible to steal the vehicle.

7

2

Share

What is the maximum speed limit for non-motor vehicles?

Non-motor vehicles must not exceed a speed of 15 kilometers per hour. Additional information: 1. Non-motor vehicles: Non-motor vehicles refer to vehicles that are driven by human or animal power and operate on roads, as well as vehicles with power devices but designed with maximum speeds, empty vehicle weights, and dimensions that comply with relevant national standards, such as motorized wheelchairs for the disabled. This includes trailers, freight handcarts, and animal-drawn vehicles. 2. Traffic regulations: Adhere to safety regulations and drive in designated lanes. When riding a bicycle or tricycle and needing to cross a motor vehicle lane, the rider should dismount and push the vehicle. If there is a crosswalk or pedestrian crossing facility, it should be used; if there is no crosswalk, no pedestrian crossing facility, or it is inconvenient to use such facilities, proceed straight after ensuring safety. Non-motor vehicles that cannot travel in their designated lane due to obstruction may use the adjacent motor vehicle lane in the affected section and must return to the non-motor vehicle lane promptly after passing the obstructed area. Motor vehicles encountering such situations should slow down and yield.

11

2

Share

What is the wading depth of the Hongguang Mini?

The wading depth of the Hongguang Mini is 125mm. The wading depth of the Hongguang Mini is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Hongguang Mini is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at low speed, avoiding sudden acceleration or deceleration; For roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to judge the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.

20

1

Share

How to Set Memory for Power Seats?

Method for setting memory on power seats: After ignition starts, adjust the seat to a comfortable position and the desired preset location. Press the SET button on the door panel and hold for approximately 3 seconds until the SET light illuminates. Then select to store the position to memory 1 or 2. Upon hearing a beep sound, the seat position is memorized. When driving again, simply press the preset 1 or 2 to recall the position. In some mid-to-high-end models with advanced configurations, the driver's seat generally features a memory function, and this feature key is highly convenient and practical. The power seat memory integrates the power seat with the vehicle's computer system, adding memory functionality to the seat and enabling intelligent management of various seat information parameters.

13

0

Share

What is a DSP in cars?

Is a Tiptronic Transmission the Same as an AT Transmission?

How to Deal with Windshield Glare?

What is the flashing red light after locking the car?

What is the maximum speed limit for non-motor vehicles?

What is the wading depth of the Hongguang Mini?

How to Set Memory for Power Seats?

How to Operate the Remote Start Feature on the Honda Inspire?

How to Deal with the Coolant Warning in BMW 5 Series?

How to Turn on the Air Conditioning in the Octavia?

What happens if you forget to engage the handbrake after parking?