What is a Driving License?

1 Answers
MacAdeline
07/29/25 10:57pm
A driving license, short for motor vehicle driving license, is equivalent to the ID card of a vehicle. Only those who have acquired safe driving skills and obtained a driving license are permitted to drive on the road. Below is detailed information about the driving license: 1. Definition in China: A motor vehicle driving license is a legal certificate issued by the administrative department after a person who is legally allowed to learn to drive a motor vehicle has studied, mastered the knowledge of traffic regulations and driving skills, and passed the examination. It permits the holder to drive a certain type of motor vehicle. 2. Renewal: To renew a new version of the driving license, citizens need to bring two copies of their ID card, two 1-inch color passport photos without hats, the original ID card, the original driving license, and a medical examination certificate from a county-level or above hospital (free physical examination is also available at the vehicle management office) to the vehicle management office. After filling out the 'Motor Vehicle Driving License Application Form', the renewal is free of charge. 3. Replacement: Citizens who need to replace a lost driving license must also bring the above-mentioned materials to the vehicle management office, fill out the 'Motor Vehicle Driving License Application Form' and the 'Motor Vehicle Driving License Replacement Application Form', and pay the fee before receiving the new version of the driving license.
Was this review help?
15
4
Share
More Forum Discussions

What are the symptoms of engine cylinder scuffing?

The symptoms of engine cylinder scuffing are: 1. The car will experience difficulty driving during operation; 2. The engine's water temperature rises; 3. Unstable engine speed or stalling of the car. The causes of engine cylinder scuffing are: 1. Insufficient lubrication between the piston and cylinder or incorrect engine oil selection; 2. Abnormal operation of the piston rings; 3. Incorrect repair or assembly; 4. The gap between the piston and cylinder is too small; 5. Failure of the engine cooling system. Methods to prevent engine cylinder scuffing include: 1. Regularly replace the air filter; 2. Monitor the engine water temperature while driving; 3. Use the engine properly.
16
5
Share

What is the size of the Prado steering wheel?

Toyota Prado steering wheel diameter is 40CM. The function of the Toyota Prado steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Precautions for steering: Do not cross your hands, and do not change your grip position due to changes in the steering wheel position. Do not look down at the steering wheel while turning it; instead, observe the road conditions and rearview mirrors to the left and right. Correct steering wheel grip posture: Imagine the steering wheel as a clock, corresponding to the one o'clock, two o'clock, three o'clock directions... The left hand should grip at the nine o'clock position, and the right hand at the three o'clock position, with the thumbs naturally pointing upwards and the other four fingers pointing downwards.
5
2
Share

What is the difference between 20A and 32A?

Here are the differences between 20A and 32A: 1. Different current sizes: The former is 32 amps, while the latter is 20 amps. If the charger input value is large, the latter has greater charging power. For the same battery capacity, the latter requires a shorter time to charge. 2. Different energy storage capacities: The 32A capacity is 10Ah larger than the 20A capacity. Under normal conditions, two fully charged batteries discharged at 2A until the end, the 20A can discharge for 10 hours, while the 32A can discharge for 16 hours. 3. Different power levels: 60V 20A provides stronger power, allowing electric vehicles to run faster, whereas 48V 32A provides weaker power, making electric vehicles run slower.
6
5
Share

What is the Dual Clutch Driving Skills Tutorial?

Correct starting method for dual clutch: When starting, make sure to press the brake, then shift into N gear to start. After starting, shift into D gear, release the brake, press the accelerator, and the vehicle will start moving. More details are as follows: 1. The dual clutch transmission has a noticeable jerk during starting, which is caused by the structure of the transmission and its shifting logic. The solution is to switch to manual mode when starting to delay the upshift timing, which can effectively reduce the jerk. 2. Correct parking method for dual clutch: When parking, make sure to press the brake first, wait until the car comes to a complete stop, then shift into N gear, turn off the engine, and shift into P gear to park.
16
2
Share

What is the fuel consumption of the Venucia Star Little Bear?

The fuel consumption range of the Venucia Star Little Bear is approximately between 6.2L/100KM and 9.45L/100KM. Factors affecting fuel consumption: The driver's driving habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, can all affect the vehicle's fuel consumption. Ways to reduce fuel consumption: Start in a low gear, gently press the accelerator, and gradually increase speed; avoid prolonged idling or low-speed driving; avoid excessive vehicle load and a full fuel tank; avoid using high-viscosity engine oil; try to control speed with the accelerator rather than the brake.
1
3
Share

How to Maintain a White Car?

White car maintenance methods include: 1. Timely removal of dust from the car body before use; 2. Promptly washing the car after rain; 3. Avoiding washing the car under direct sunlight; 4. Using dedicated neutral running water for car washing; 5. Wiping in the direction of water flow, gently from top to bottom; 6. Timely removal of contaminants such as asphalt and bird droppings; 7. Avoiding frequent car paint polishing. Maintenance tasks include: 1. Replacing engine oil, oil filter, transmission fluid, and spark plugs; 2. Inspecting air filters, fuel filters, and tires; 3. Refilling antifreeze and power steering fluid. The purpose of maintenance is: 1. To keep the car clean and in normal technical condition, eliminating potential hazards and preventing faults; 2. To slow down the deterioration process of components and extend their service life.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.