What is a Clean Energy Vehicle?

Why are lithium batteries prone to explosion?

Lithium batteries are prone to explosion for the following reasons: 1. Insufficient anode capacity in lithium batteries: When the anode capacity in the positive electrode area is insufficient, the lithium atoms generated during charging cannot be inserted into the layered structure of the anode graphite and will precipitate on the surface of the anode, forming crystals. Long-term crystal formation in lithium batteries can lead to short circuits, causing the cell to discharge rapidly and generate a large amount of heat, which burns the separator. High temperatures can decompose the electrolyte into gas, and when the pressure becomes too high, the cell will explode. 2. Excessive moisture content: During charging, moisture can react with lithium to form lithium oxide, causing capacity loss in the cell and making it prone to overcharging, which generates gas. The decomposition of moisture lowers the voltage, making it easier to decompose into gas during charging. The series of gases generated will increase the internal pressure of the cell, and when the cell's casing cannot withstand it, the cell will explode. 3. Internal short circuit: An internal short circuit in the cell causes high-current discharge, generating a large amount of heat that burns the separator, leading to a more severe short circuit. This also decomposes the electrolyte into gas, creating excessive internal pressure and causing the cell to explode. 4. Overcharging of lithium batteries: During overcharging, excessive release of lithium from the positive electrode can alter its structure, and the excess lithium may not be inserted into the anode, leading to lithium precipitation on the anode surface. When the voltage exceeds 4.5V, the electrolyte decomposes, producing a large amount of gas and causing an explosion. 5. External short circuit: An external short circuit may occur due to incorrect connection of the positive and negative electrodes. The high discharge current from an external short circuit causes the cell to heat up. High temperatures can shrink or completely damage the internal separator, leading to an internal short circuit and subsequent explosion.

2

1

Share

What is the correct way to use the Honda Civic's one-button start?

Honda Civic's one-button start correct usage is to perform self-check when the driver sits in the cockpit, press the brake pedal, press the one-button start button to ignite, then release the handbrake after engaging D gear with the foot brake pressed. Here are relevant introductions about the Civic: 1. Body specifications: The Civic is a compact 5-door 5-seat hatchback with body dimensions of: length 4517mm, width 1799mm, height 1434mm, and wheelbase 2700mm. 2. Engine configuration: The Civic is equipped with a 1.5T turbocharged engine and CVT continuously variable transmission, delivering maximum power of 130kW and maximum torque of 220N·m. It uses MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.

2

3

Share

How Long Does It Usually Take to Buy and Pick Up a Car?

Due to differences in the purchased vehicle models and configurations, the time from purchase to pickup is not a fixed value. For some popular models, it may take about a month to pick up the car, while for less popular models, the pickup time may be shorter. Below are some common misconceptions when buying a new car: 1. SUVs are better than sedans: Car purchases should not be made blindly, especially when choosing the vehicle type. Although SUVs are larger in size, they also tend to have higher fuel consumption. Consumers should make reasonable purchase decisions based on their needs. 2. Bigger space means better: When comparing five-seat SUVs and seven-seat SUVs, many might opt for the latter, assuming that seven-seat SUVs offer more space. However, in actual usage, five-seat SUVs may be more convenient and provide better comfort for passengers.

14

3

Share

How to Replace the Fuel Filter of Baojun 730?

To replace the fuel filter of Baojun 730, first, drain the oil, clean or replace it, then tighten the new air filter, and add engine oil to complete the replacement. Here is the relevant introduction about the fuel filter: 1. Replacement Interval: The replacement interval for the Baojun 730 fuel filter is 20,000 kilometers. 2. Function of the Fuel Filter: The fuel filter's function is to remove water and impurities from the gasoline. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases, heavier water and impurity particles settle at the bottom of the bowl. Lighter impurities flow with the fuel towards the filter element, while clean fuel passes through the fine pores of the filter element into its interior and then flows out through the fuel pipe.

6

2

Share

Can I Get a Car Loan in Another City?

Yes. You can also finance a car purchase in another city, but you need to provide the relevant documents. When financing a car purchase, consumers should prepare the necessary documents in advance and consult beforehand to avoid any mistakes during the purchase process, which could delay vehicle use. Considerations for car loans: 1. Loan amount: The loan amount may vary depending on personal credit. It is recommended that consumers understand the loan amount in advance. 2. Repayment methods: There are different repayment options for car loans. Consumers can choose the most suitable repayment method based on their actual situation. Generally, there are two methods: equal principal and interest payments and equal principal payments.

16

0

Share

Are Car Steering Wheel Covers Universal?

Car steering wheel covers are not universal for all vehicle models. The specific explanation is as follows: Different manufacturers have their own design elements for steering wheels, meaning the outer diameter, length, and thickness may vary. Therefore, it is necessary to purchase a steering wheel cover that matches your specific vehicle model. Using a cover designed for another model may pose safety hazards. The installation method for steering wheel covers is as follows: 1. Confirm the position: Determine the relative position and direction of the steering wheel cover. 2. Fit the cover onto the steering wheel: Start by fitting the top of the cover onto the steering wheel, then gradually pull it down from both sides. 3. Apply reasonable force: When the cover is halfway on, resistance may increase. Do not worry; applying a bit more force will help fully fit the cover. 4. Check: Re-examine the relative position of the cover and the steering wheel. If it is misaligned, adjust it accordingly.

3

4

Share

What is a Clean Energy Vehicle?

Why are lithium batteries prone to explosion?

What is the correct way to use the Honda Civic's one-button start?

How Long Does It Usually Take to Buy and Pick Up a Car?

How to Replace the Fuel Filter of Baojun 730?

Can I Get a Car Loan in Another City?

Are Car Steering Wheel Covers Universal?

Is there a toll fee on highways during the Mid-Autumn Festival?

Can a Family Sedan Tow a Trailer?

What Are the Hidden Features of the New Audi A4L?

In which year was the ninth-generation Accord launched?