What is a Central Locking System in a Car?

1 Answers
McHector
07/30/25 9:42am
Central locking system in a car refers to a control switch located next to the driver's seat that can simultaneously control the locking and unlocking of all vehicle doors. This "central door lock" control device was first installed in cars as early as the 1970s, and after more than two decades, it has become relatively common. The central locking switch is usually installed on the door or the center console. The functions of the central locking system in a car are as follows: 1. Central control. When the driver locks the door next to them, all other doors are simultaneously locked. The driver can use the door lock switch to open all doors at once or open a specific door individually. 2. Speed control. When the vehicle reaches a certain speed, all doors can automatically lock to prevent passengers from accidentally opening the doors by operating the door handles.
Was this review help?
19
1
Share
More Forum Discussions

How to Turn On and Off the Rear Wiper of a Volkswagen?

To operate the rear wiper of a Volkswagen, push the wiper lever towards the dashboard and then flip it upwards to activate the rear wiper. To turn it off, simply return the lever to its original position. The wiper, also known as a windscreen wiper, is a device used to remove rain and dirt from the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. In terms of suspension, this model features a McPherson strut independent front suspension and a torsion beam non-independent rear suspension.
9
5
Share

How to reset the tire pressure warning on a 2019 CR-V?

The method to reset the tire pressure warning on a 2019 CR-V: 1. Press the arrow button on the lower right side of the steering wheel, and the central round screen will display the setting interface; 2. Press the sel or reset button, and the central round screen will enter the tire pressure monitoring system interface, then it's done. The 2019 CR-V is a compact SUV under Honda, with exterior dimensions of 4585mm in length, 1855mm in width, 1689mm in height, and a wheelbase of 2660mm. The 2019 CR-V is equipped with a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
1
4
Share

What does m3 mean?

m3 refers to the BMW M3. Taking the 2021 BMW M3 Competition Edition as an example, its body dimensions are 4803mm in length, 1903mm in width, and 1447mm in height, with a wheelbase of 2857mm. The body structure is a 4-door, 5-seater sedan, and the minimum ground clearance is 120mm. The BMW M3 is equipped with a 3.0T twin-turbocharged engine, delivering a maximum horsepower of 510PS, a maximum power of 375kW, and a maximum torque of 650Nm. It is paired with an 8-speed automatic manual transmission, and the drive system is front-engine, rear-wheel drive. The front suspension type is a double-joint spring strut front axle, and the rear suspension type is a five-link independent suspension.
14
0
Share

What is the difference between 185 and 195 tires?

185 tires and 195 tires differ in width by 10 millimeters. Tires, commonly referred to as such, are typically made of wear-resistant rubber materials and can be classified into solid tires and pneumatic tires, with pneumatic tires consisting of an inner tube and an outer tire. Tires are one of the crucial components of a vehicle, serving several key functions: 1. Supporting the entire weight of the vehicle and bearing its load; 2. Transmitting traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations and premature damage to vehicle components, thereby ensuring driving safety, handling stability, comfort, and fuel efficiency.
14
4
Share

How to Clear the Maintenance Reminder for the 2015 Sagitar?

Method to clear the maintenance reminder for the 2015 Sagitar: 1. Turn off the ignition switch and shut off the engine; 2. Press and hold the right adjustment button on the instrument panel; 3. While keeping the right button pressed, turn on the ignition switch; 4. Release the right button and press the left menu button once to complete the process. The 2015 Sagitar is a compact car with exterior dimensions of 4655mm in length, 1780mm in width, and 1453mm in height, a wheelbase of 2651mm, and a minimum ground clearance of 113mm. It is equipped with a 1.6L naturally aspirated engine and paired with a 6-speed AT automatic manual transmission.
17
4
Share

What is the standard for gear backlash?

3ml~4ml. Below is relevant information about gear backlash: 1. Introduction: Gear backlash refers to the circumferential play of one gear when the other gear in a meshed pair is fixed, measured as arc length along the pitch circle. In rotary mechanism transmissions, the pinion is installed with the rotary bearing as a standard component whose tooth thickness cannot be altered. To meet heavy load requirements, the pinion's thickness cannot be reduced. 2. Design principle: To ensure proper lubricating oil film formation between tooth surfaces and prevent gear seizure caused by thermal expansion during operation, appropriate gear backlash must be maintained during meshing.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.