What is a CASE excavator?

What is the biggest problem with flood-damaged cars?

The problems with flood-damaged cars are as follows: 1. Electronic system failure: Modern vehicles are equipped with various functions, and it's not an exaggeration to say they are collections of electronic components. Non-professional off-road vehicles generally have little waterproof treatment for their electronic equipment. After water exposure, the engine's related electronic modules are prone to short circuits due to rust and corrosion caused by water immersion. Additionally, car wiring is usually routed along the bottom edges of doors, making it easily soaked. If these modules and circuits malfunction, the consequences can range from a single function failure to vehicle destruction, or even fires caused by short circuits. 2. Engine failure: When the water level is higher than the engine's air intake, water naturally flows into the cylinders, forming a mixture of air and water. While air is compressible, water is not. When the crankshaft pushes the connecting rod to compress the piston, the incompressible water causes the connecting rod to deform and bend. If the owner attempts to restart the vehicle after the engine stalls due to water intake, the tremendous reverse force can cause the bent connecting rod to rub against the cylinder wall, instantly rupturing the engine block.

1

4

Share

Will switching from 5w40 to 5w30 engine oil cause oil consumption in Volkswagen Bora?

Switching from 5w40 to 5w30 engine oil in a Volkswagen Bora will not cause harm. The 40-grade oil is slightly more viscous than the 30-grade, resulting in slightly higher engine resistance during use, which may lead to a small increase in fuel consumption. However, the engine noise will be quieter and more subdued. During regular vehicle use, it is important to change the engine oil periodically and replace the oil filter along with each oil change. The oil filter functions to filter the engine oil; without it, the oil may become dirty after some use. Additional information: 1. Engine oil not only lubricates but also cleans, seals, buffers, prevents rust, and dissipates heat in the engine. When the engine is running, the oil forms a thin film on the surfaces of various engine components, preventing direct contact and friction between them. 2. If engine components directly contact and create friction, it will accelerate engine wear and cause the engine to overheat. Continuous operation in an overheated state can damage the engine. Over time, the performance of engine oil degrades, so it must be replaced regularly.

6

1

Share

What to Do When the Interior Light of Volkswagen Lavida Stays On?

If the interior light or dome light of the Lavida remains on, it indicates that the reading light switch inside the car has been activated. Simply turning it off can resolve this issue by pressing the switch on the ceiling. The specific steps are as follows: 1. Start the vehicle and wait for the entire electrical system to power up; 2. Press the switch next to the dome light to set the opening mode of the interior dome light switch. The options include the light turning on when the door is opened, the light staying on continuously, or the light remaining off. Alternatively, you can customize the settings based on your preferences. Additional Information: 1. Some car interior lights can be toggled by pressing them directly, a feature many car owners might not be aware of. You can check if your ceiling light supports this press operation. 2. If the interior light turns on abnormally, inspect the light switch, doors, and the lights themselves. Since interior lights are frequently used, they generally do not encounter issues. 3. If the light stays on continuously, it might be set to the always-on mode or the door-activated mode. In this case, simply check the related settings. Typically, the interior light will turn on once the car is powered. Therefore, ensure that the doors are properly closed and the dome light settings are correct.

18

5

Share

Does Lynk & Co have new energy vehicles?

Lynk & Co has new energy vehicles. Currently, there are four new energy models available for sale from Lynk & Co, namely the Lynk & Co 01 PHEV, Lynk & Co 05 PHEV, Lynk & Co 06 PHEV, and Lynk & Co 09 PHEV, covering small, compact, and mid-to-large SUV models. The Lynk & Co 01 PHEV and Lynk & Co 05 PHEV are both positioned as compact SUVs, with similar exterior and interior designs, though the Lynk & Co 05 PHEV features a coupe-style design. In terms of power, both models are equipped with a plug-in hybrid system consisting of a 1.5T engine, delivering a maximum engine power of 132 kW and a peak torque of 265 N·m, while the electric motor provides a maximum power of 82 horsepower and a peak torque of 160 N·m. The transmission system is matched with a 7-speed wet dual-clutch hybrid gearbox, featuring front-wheel drive and a pure electric range of 81 km. The Lynk & Co 06 PHEV is positioned as a small SUV. The new model is also equipped with a 1.5T engine, delivering a maximum power of 130 kW and a peak torque of 255 N·m, paired with a 7-speed wet dual-clutch gearbox. According to official data, the vehicle has a pure electric range of 84 km under NEDC conditions, supports 6.6 kW fast charging, and can be fully charged in as little as 2.5 hours. The Lynk & Co 09 PHEV is positioned as the brand's flagship model. In terms of power, it is equipped with a Drive-E 2.0TD-T8 + 8AT powertrain, with the system delivering a maximum output power of 317 kW and a peak torque of 659 N·m with the assistance of two electric motors. The official 0-100 km/h acceleration time is under 5.5 seconds, and the pure electric range is 80 km. Additionally, the PHEV version is equipped with a discharge function, allowing the power battery to release electricity through the charging port to power appliances such as induction cookers and electric kettles.

2

1

Share

Can China V vehicles be registered in Shenzhen?

Shenzhen no longer allows the registration of China V vehicles, as the city implemented the China VI emission standards on July 1, 2019. Both new and used vehicles that do not meet the China VI standards cannot be registered or transferred. Below are the implementation timelines for emission standards: 1. China I standard, implemented nationwide on July 1, 2001, primarily targeting restrictions on carbon monoxide, hydrocarbons, and particulate emissions. 2. China II standard, implemented nationwide on July 1, 2004, requiring a 30% reduction in carbon monoxide and a 55% reduction in hydrocarbons and carbon oxides. 3. China III standard, implemented nationwide on July 1, 2007, requiring a 40% reduction in total pollutant emissions compared to China II. 4. China IV standard, implemented nationwide on July 1, 2010, requiring a 50% to 60% reduction compared to China III. 5. China V standard, implemented nationwide on January 1, 2018, requiring a 25% reduction in nitrogen oxide emissions compared to China IV. 6. China VI standard, with China VIa implemented nationwide on July 1, 2020, and China VIb implemented nationwide on July 1, 2023.

1

0

Share

Where is the one-button start for Li Auto?

The start button for the Li ONE is located on the right side of the steering wheel, on the lower right panel. The one-button start is a part of the smart car's system, designed to simplify the ignition process with a single button that can also turn off the engine. In case of an emergency while driving, pressing the one-button start for more than 3 seconds can shut down the engine. The correct usage of the one-button start is as follows: 1. Turning off the engine while driving: In an emergency during driving, the engine can be shut down by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively, switching the power to ACC mode. 2. Restarting the engine while driving: If the engine stalls during driving, it can be restarted without pressing the brake pedal by shifting the gear lever to N (neutral position) and pressing the engine start/stop button. 3. Low battery or malfunction of the smart key: If the smart key battery is low or the smart key is not functioning properly, replace the battery promptly. If the vehicle needs to be used, the door can be opened with the mechanical key, and the smart key can be inserted into the smart key cylinder to start the engine. 4. Steering wheel lock: When the engine start/stop button is in OFF mode, the steering wheel is locked for anti-theft purposes. When the door is opened or the smart key is removed from the smart key cylinder, the steering wheel will automatically lock. Normally, when the engine start/stop button is in ACC mode, the steering wheel will automatically unlock. If the steering wheel does not unlock normally, turn it left and right while pressing the engine start/stop button to release tension and unlock the steering wheel.

20

3

Share

What is a CASE excavator?

What is the biggest problem with flood-damaged cars?

Will switching from 5w40 to 5w30 engine oil cause oil consumption in Volkswagen Bora?

What to Do When the Interior Light of Volkswagen Lavida Stays On?

Does Lynk & Co have new energy vehicles?

Can China V vehicles be registered in Shenzhen?

Where is the one-button start for Li Auto?

What Brand is the Teana Transmission?

What to Do When a Mazda Key Fob Battery Dies?

What does manual evaluation in Subject 2 mean?

Will the Geely Emgrand automatically lock if I forget to lock it?