What is a C1D driver's license and how to obtain it?

2 Answers
VonKennedy
07/24/25 4:24am
C1D is a combined driver's license for motor vehicles and motorcycles, which adds the motorcycle driving category to the motor vehicle driver's license. The C1D driver's license cannot be obtained directly. You need to pass the C1 driver's license test first and then add the D driver's license. You can apply for the D license if you have held the C1 driver's license for more than one year and have not accumulated 12 penalty points in the current scoring cycle and the most recent scoring cycle before application. Classification of driver's licenses: Motor vehicle driver's licenses are divided into 16 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, C5, D, E, F, M, N, P. C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The driving scope of the C1 driver's license includes small and mini passenger cars, light and mini cargo trucks; light, small, and mini special operation vehicles; and small passenger cars with a seating capacity of 9 or fewer people.
Was this review help?
18
1
Share
ElianaLee
08/11/25 12:01am
C1D might be a misunderstanding, friends. In China's driver's license system, there are actually two separate categories: C1 and D. C1 refers to a small car license that allows you to drive small cars and light trucks, while D is a three-wheeled motorcycle license that permits you to ride three-wheeled motorcycles. To obtain these licenses, you need to take the tests separately. I recently got my C1 license, and the process was quite straightforward: first, you must be at least 18 years old and pass a health check. Then, you register at a driving school, pay the tuition fees, and start learning theoretical knowledge. Next, you take the written test for Subject 1. After passing, you practice field driving skills like reverse parking for Subject 2, followed by road testing for Subject 3. Finally, there's a safety and civilized driving test for Subject 4. The whole process takes about three to four months and costs around four to five thousand yuan. The motorcycle D license test is similar but requires better balance skills. Taking both tests together can save time, but remember to practice more and prioritize road safety—this way, driving for travel becomes both convenient and exciting. Common issues like failing the theory test can be resolved by practicing more questions and staying calm during the test.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Is the Mazda6 Ruiyi produced by Changan Mazda or FAW Mazda?

Mazda6 Ruiyi is produced by FAW Mazda, and it is a mid-size car. Taking the 2015 Mazda6 Ruiyi as an example, its body dimensions are: length 4755mm, width 1795mm, height 1440mm, wheelbase 2725mm, fuel tank capacity 64L, and curb weight 1413kg. The 2015 Mazda6 Ruiyi features a double-wishbone torsion bar independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 147PS, maximum power of 108kW, and maximum torque of 184Nm, paired with a 5-speed automatic transmission.
20
4
Share

Where is the cabin air filter located in the Nissan Livina?

The cabin air filter in the Nissan Livina is located beneath the glove compartment on the passenger side. You can access it by removing the glove box. Taking the 2015 Livina model as an example, its body dimensions are: length 4249mm, width 1699mm, height 1577mm, with a wheelbase of 2600mm. It has a fuel tank capacity of 52 liters and a trunk capacity of 371 liters, with a curb weight of 1174kg. The 2015 Livina is equipped with a 1.5L naturally aspirated engine producing maximum horsepower of 124PS, maximum power of 91kW, and maximum torque of 153Nm, paired with a continuously variable transmission.
18
3
Share

Does a New Car Still Need a Break-in Period?

New cars require a break-in period. The break-in period refers to the initial driving phase after a new car leaves the factory, during which the engine components gradually wear in smoothly. The recommended break-in mileage is approximately 1,000 to 3,000 kilometers, with the first maintenance due around 5,000 kilometers. Precautions for using a new car during the break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Prevent overloading; 4. Avoid long-distance trips; 5. Do not drive at high speeds; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears promptly; 9. Properly adjust the ignition and fuel supply systems.
17
0
Share

Which Cars Have Night Vision Systems?

Cars equipped with night vision systems include the Mercedes-Benz S-Class and the BMW 760Li. Night vision systems utilize infrared technology to illuminate darkness, allowing drivers to see farther and more clearly at night. This technology significantly reduces the adverse visual stimulation caused by the strong headlights of oncoming vehicles and enhances the driver's ability to discern objects while driving in fog. The structural components of a night vision system consist of: 1. An infrared camera; 2. A light display system on the windshield. Taking the 2021 Mercedes-Benz S-Class Business model as an example, it is a full-size sedan with the following dimensions: length 5290mm, width 1921mm, height 1503mm, wheelbase 3216mm, fuel tank capacity 76 liters, and trunk capacity 550 liters.
10
0
Share

How to Remove and Install the Fog Lights on a Nissan Sylphy?

The steps to remove and install the fog lights on a Nissan Sylphy are as follows: 1. Use a flathead screwdriver to pry from the back of the fog light grille to release the clips inside; 2. Use a flathead screwdriver to pry the clips securing the grille to the front bumper from the front gap; 3. Remove the fog light grille and spline; 4. Unscrew the two screws; 5. Hold the side where the screws were removed and pull upwards to take out the fog light for disassembly. The functions of fog lights are: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear and to alert oncoming drivers; 2. Rear fog lights help vehicles behind to spot your car in low-visibility conditions.
17
1
Share

What is the normal tire pressure for the Geely Vision S1?

The normal tire pressure for the Geely Vision S1 is 2.2 mpa, and the spare tire pressure is 4.2 mpa. Tire pressure refers to the air pressure inside the tire, which is the blood pressure of the car. The level of tire pressure plays a crucial role in the performance and power of the car. Tire pressure is an indicator of the car's load capacity, and the size of the car's load depends on the level of tire pressure. Taking the 2019 CVT Luxury Geely Vision S1 as an example, its body dimensions are: length 4465mm, width 1800mm, height 1535mm, wheelbase 2668mm, and the body structure is a five-door five-seat SUV.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.