What is 2.4 tire pressure in psi?

1 Answers
LydiaFitz
07/29/25 11:00am
Tire pressure of 2.4 is 240 psi. Car tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a crucial role in the performance and power of the vehicle. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to deviations, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing excessive rolling and abnormal heating of the tire; Reduces the functionality of the cord and rubber, leading to delamination or cord breakage, excessive friction with the rim causing damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout; Increases tire body deformation, making the tire side prone to cracks, while generating flexing movement, leading to excessive heating, promoting rubber aging, cord fatigue, and breakage, and also increases the tire's contact area with the ground, accelerating shoulder wear. Methods to address insufficient tire pressure: If no damage is visible, simply inflate to normal tire pressure and reset the tire pressure system; If a puncture is found upon inspection, promptly drive to a tire shop for repair and then reinflate; If the tire pressure warning reappears after inflation without any puncture, it may be due to air leakage caused by rim deformation. It is recommended to check the rim and replace it if necessary.
Was this review help?
19
5
Share
More Forum Discussions

Does the Jetour X70 support CarPlay?

Jetour X70 supports CarPlay. You can use it by clicking on CarPlay in the car. CarPlay connection method: If the vehicle supports connecting to CarPlay via a USB cable, simply connect your iPhone to the car's USB port using a USB cable. If the vehicle supports wireless CarPlay, first turn on the Bluetooth on the central control screen, then on your iPhone go to "Settings" > "General" > "CarPlay", tap "Available Cars", and select your car. Note that wireless CarPlay requires the phone's WiFi and Bluetooth to be turned on. Function of CarPlay: The function of CarPlay is to build a bridge between iPhone applications and the car's digital system, making it easier to control the device. CarPlay allows drivers to use their iPhone in the car with minimal distraction.
20
1
Share

Why doesn't the new generation ix35 have navigation?

The new generation ix35 doesn't have navigation probably because the purchased configuration doesn't include it. The top trim naturally comes with navigation, but you can always ask the 4S store to include navigation as a gift when purchasing the car. New generation ix35 exterior: The exterior design is avant-garde and stylish, with a sharp and domineering large grille in the front, clearly defined body lines on the side that exude strength, and blackened D-pillars that add a sporty touch. The rear is full and upright, very aesthetically pleasing. New generation ix35 interior: The overall layout is relatively simple, with a 9.6-inch display screen in the center that adds a touch of class. This standard model comes with a one-button start function, but the braking system still uses a handbrake.
6
4
Share

Which is better after ten years: Japanese or German cars?

Under normal circumstances, Japanese cars will not experience any major issues after ten years of use, while German cars may develop some electronic faults and oil seepage from rubber seals. More details are as follows: Introduction 1: Most Japanese cars use naturally aspirated engines, with only a small portion adopting turbocharged engines. Naturally aspirated engines are more stable than turbocharged ones, and their rubber seals rarely develop oil leaks over time. Additionally, Japanese car engines operate at relatively lower temperatures and have moderate maximum RPM limits. Introduction 2: In contrast, German cars prioritize performance and cutting-edge technology, resulting in numerous advanced but complex electronic systems that tend to malfunction over time. Furthermore, German cars push their engines to higher performance limits, subjecting engine seals to prolonged high temperatures and pressures, which eventually leads to oil leaks.
5
2
Share

What are the photography standards for yielding to pedestrians?

The photography standards for yielding to pedestrians are introduced as follows: The first category: Automatic capture through electronic eyes. Generally, systems for photographing failures to yield to pedestrians are installed at major urban road entrances and exits. Through camera video surveillance, automatic photography of failures to yield to pedestrians is conducted, and the data is retained. A violation notification SMS will be sent to the user within 3-10 working days. The second category: Manual capture by traffic police through monitoring video. Traffic police in the video monitoring hall will assign officers to monitor video feeds from major intersections and manually capture violations. This is also an irregular and non-directional spot check. If any failure to yield is found, relevant photos and video data will be retained. This method is more flexible than automatic electronic capture, allowing for analysis based on special circumstances, but it is also more labor-intensive. The third category: On-site manual photography by traffic officers directing traffic or the general public.
7
3
Share

What is the normal tire pressure range for a Mercedes-Benz C-Class?

The normal tire pressure for a Mercedes-Benz C-Class should be maintained between 2.3bar and 2.5bar. Hazards of overinflated or underinflated tires: For tires, the pressure should neither be too high nor too low. Overinflation reduces the contact area between the tire and the road, leading to poor grip, which affects the vehicle's handling and driving stability. Underinflation can cause wave-like deformation of the tire during high-speed driving, shortening the tire's lifespan and increasing the risk of a blowout. Introduction to standard tire pressure: According to the international GBT2978-2008 standard, the recommended tire pressures are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar.
12
5
Share

What Does Subject 3 Test Include?

Subject 3 examination consists of road driving skills test and safe & civilized driving knowledge test. Below are the detailed contents: Road Driving Skills: Vehicle preparation, lighting simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, passing through intersections straight, left turns at intersections, right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, U-turns, and nighttime driving. Safe & Civilized Driving Knowledge: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident disposal knowledge.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.