What Insurance Do You Need to Buy for Vehicle Inspection?

1 Answers
PenelopeDella
07/29/25 8:57pm
You need to purchase compulsory traffic accident liability insurance for vehicle inspection. More information about compulsory traffic accident liability insurance is as follows: 1. The full name of compulsory traffic accident liability insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles". It is a mandatory liability insurance provided by insurance companies to compensate for personal injury, death, and property losses of victims (excluding passengers and the insured) caused by road traffic accidents involving the insured motor vehicle, within the liability limits. 2. Compulsory traffic accident liability insurance is China's first mandatory insurance system implemented by national law. The insurance premium follows a nationally unified standard, as stipulated by the state, but the price varies depending on the vehicle model, with the main influencing factor being the "number of car seats".
Was this review help?
15
5
Share
More Forum Discussions

What to Do When Car Window Glass is Difficult to Raise or Lower?

Reasons and solutions for difficult window glass operation: 1. Window lift motor damage or poor contact in the wiring harness: If there is a burnt smell when holding down the window button or strange noises inside the door panel, it is likely that the window lift motor components are damaged. In this case, it is recommended to directly replace the window lift motor. 2. Motor overheating protection: To protect the power supply circuit, most window lift motors have an overheating protection mechanism. If components overheat for some reason, the motor will enter a protection state, causing the window to stop functioning. In this situation, simply wait for the motor to cool down. 3. Excessive resistance in the glass guide channel: The door glass guide channel is an often-overlooked detail. Over time, dust can accumulate in the guide channel, increasing resistance and making it harder to raise the glass. Regularly clean debris from the window glass guide rails or use lubricating grease for lubrication. 4. Loss of computer data: Disconnecting the battery, interrupting power or ground lines to the window control module during maintenance of other systems, or severe power loss when starting the engine can cause the initialization data for the windows to be lost, preventing them from operating. In this case, the window lift function needs to be reset.
5
3
Share

How Long Does It Take to Replace Brake Pads?

Replacing a set of brake pads alone takes about 1 hour, which is both time-consuming and labor-intensive. The specific steps are as follows: 1. When replacing brake pads, the car needs to be lifted and the tires removed. 2. Remove the screws of the brake caliper, take off the brake caliper, and remove the old brake pads. 3. Push the brake piston back in and install the new brake pads. 4. Reinstall the brake caliper, tighten the caliper screws to the required torque, and then reinstall the tire. Precautions: 1. After replacing the brake pads on both sides, you may notice brake fluid overflowing from the brake fluid reservoir. In this case, you need to press the brake pedal several times to keep the fluid level between max and min. 2. Pressing the brake pedal is to eliminate the gap between the brake pads and the brake disc and to reset the wheel cylinder piston. 3. Generally, new brake pads require a break-in period. Only after this period can they perform their braking function more effectively.
20
1
Share

What does the exclamation mark light on the dashboard mean?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general faults, automatic transmission faults, braking system faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these five situations: General Faults: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor faults, fuel cutoff system intervention or failure, external light faults, or engine oil pressure sensor faults. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission fault or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Braking System Fault: A circle with parentheses and an exclamation mark in the middle represents a braking system warning, typically indicating a braking system malfunction or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light. This light illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
8
1
Share

Can Auto Hold and Auto Start-Stop Be Used Simultaneously?

Auto Hold is used to stabilize the vehicle after parking, while Auto Start-Stop is used for stopping and starting the engine. These are two completely different functions and can be used together. Below are detailed introductions to the Auto Hold and Auto Start-Stop functions: 1. Auto Start-Stop: When the vehicle comes to a temporary stop during driving, the engine automatically shuts off. When it's time to move forward, the engine automatically restarts. Working Principle: When the driver stops the vehicle by pressing the brake pedal and shifting to neutral, the Auto Start-Stop system automatically detects that the engine is idling and not in gear. The wheel speed sensor of the locking system shows zero, and the electronic battery sensor indicates sufficient energy for the next start. Once these three conditions are met, the engine automatically shuts off. When the driver releases the brake or turns the steering wheel, the engine automatically restarts. 2. Auto Hold: This is an automatic braking function. When activated, it automatically applies the handbrake for the driver at traffic lights to prevent rolling back. Working Principle: During driving, temporary braking and long-term braking after stopping are integrated, and parking braking is achieved through electronic control.
19
3
Share

What brand is the car brand DS?

The car brand DS is a high-end luxury car brand under the French PSA Group. Taking the DS6 as an example, its body dimensions are: length, width, and height of 4553mm, 1858mm, and 1610mm respectively, with a wheelbase of 2732mm. It is equipped with a 1.6L turbocharged engine, paired with a 6AT transmission, delivering a maximum power of 123kW and a maximum torque of 240Nm. The DS6 features full-body damping pads made of PVC materials or butyl rubber, eliminating the use of asphalt materials. It is equipped with an AQS air quality control system and an ion generator to provide a fresh and clean driving environment. High-tech configurations include a multi-road adaptation system, blind spot monitoring system, electric tailgate, and active tire pressure monitoring system.
8
3
Share

What does Driving SOS mean?

Driving SOS refers to the vehicle self-rescue system. Below is more information about it: 1. SOS is the international Morse code distress signal, not an abbreviation of a single word. Nowadays, vehicles are generally equipped with a one-touch SOS call button. The SOS system in cars is a vehicle self-rescue system. It is an emergency system designed to quickly seek rescue assistance when the vehicle encounters a malfunction, an accident, or faces a dangerous and sudden situation. 2. In case of an emergency, pressing the SOS button for more than 2 seconds will automatically activate the in-vehicle connected system. The system uses the manufacturer's built-in emergency alert feature, which can only be triggered by the connected system to send an emergency alert and locate the vehicle. For example, if a malfunction occurs, you can contact roadside rescue services through Driving SOS to seek appropriate help and services.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.