What Impact Does Ethanol Gasoline Have on Car Engines?

1 Answers
OJulia
07/30/25 5:53am
Ethanol gasoline affects the engine by reducing the vehicle's power performance, fuel economy, and cold start capability, which is detrimental to acceleration. It also has a corrosive effect on automotive metals, especially copper. Below is relevant information about ethanol gasoline: 1. Advantages of ethanol gasoline: High octane number and good anti-knock properties. Ethanol has an oxygen content as high as 34.7%, and the use of ethanol gasoline can effectively reduce vehicle exhaust emissions and improve the energy structure. 2. Shortcomings in power performance and corrosion resistance: Ethanol has a large heat of vaporization, and the evaporation temperature under the theoretical air-fuel ratio is higher than that of conventional gasoline. Ethanol produces acetic acid during combustion, which has a corrosive effect on automotive metals.
Was this review help?
14
3
Share
More Forum Discussions

What to Do When the Car's Water Temperature is Too High in Summer?

First, slow down and then drive the car to a shaded area by the roadside. Since many drivers are not familiar with the structure and principles of the cooling system, it is still recommended to turn off the engine. If the inspection reveals a water pipe leak and the leak is not severe, and there is still a large amount of coolant in the radiator, you can add coolant promptly. If the inspection reveals that the water pipe or radiator is cracked, the method mentioned earlier will not be useful. Instead, it will cause more coolant loss and a faster rise in water temperature. Once damaged, it will cut off the cooling water circulation. You can touch the upper and lower thick rubber hoses of the radiator with your hand to check for any noticeable temperature difference.
5
0
Share

Where to Add Engine Coolant for BMW 5 Series?

Open the hood, there is a black reservoir on the left side of the engine. You can add coolant by opening the reservoir cap. Here are some precautions for adding coolant to a BMW 5 Series engine: 1. The coolant for BMW 5 Series should generally be replaced annually, or every two years or 30,000 kilometers for vehicles with shorter operating times. 2. When adding coolant to a BMW 5 Series, the fluid level should be between the MAX and MIN marks. 3. Be careful not to mix different types of antifreeze. Different types of antifreeze have different freezing points due to their varying compositions, so choose according to the temperature conditions of your vehicle's operating environment.
20
1
Share

How to Remove the Rear Seat Cushion of the Buick Verano?

The method to remove the rear seat cushion of the Buick Verano is as follows: 1. There are clips on both sides at the front of the rear seat cushion. Shake it back and forth and pull it upwards forcefully. Once the clips on both sides are released, pull the cushion backwards firmly. There are three metal hooks at the back; releasing them will allow the cushion to be removed. 2. If you lack manual dexterity, it is recommended to have it removed at a 4S shop or a car wash service. 3. Additional note: If any seat back is not locked, it may move forward during emergency braking or a collision, potentially causing injury to passengers seated there. Always push and pull the seat back to ensure it is in the locked position.
20
4
Share

Can the Odyssey use 95 octane gasoline?

Odyssey can use 95 octane gasoline, but it is not recommended for long-term use. Methods to check gasoline octane rating: Refer to the car's user manual, which records what octane gasoline the car should use. The fuel cap will indicate the fuel octane rating and recommend which octane gasoline to use, specifying the optimal choice. Odyssey's gasoline octane rating: The official recommendation is to use 92 octane gasoline. Blindly choosing a higher octane gasoline will alter the vehicle's ignition timing, leading to carbon deposits in the cylinders, and over time, it may affect the engine's lifespan. However, occasionally using higher octane gasoline is acceptable.
9
2
Share

Do You Need to Replace a Pair of Shock Absorbers If One is Broken?

If one shock absorber is broken, it is necessary to replace the pair, as replacing only one can affect the vehicle's handling and balance. How Car Shock Absorbers Work: In the suspension system, elastic components generate vibrations when impacted. To improve ride comfort, shock absorbers are installed in parallel with the elastic components in the suspension to dampen vibrations. Most shock absorbers used in automotive suspension systems are hydraulic shock absorbers. Their working principle involves the piston inside the shock absorber moving up and down when relative motion occurs between the frame (or body) and axle due to vibrations. This causes the oil in the shock absorber chamber to repeatedly flow from one chamber to another through various orifices.
7
1
Share

How to Shift from S Mode to D Mode?

Method for shifting from S mode to D mode: You can directly switch between them while driving without needing to press the accelerator or brake. S mode stands for Sport mode, which is a gear setting characterized by high RPM, late upshifting, and early downshifting. It enhances the vehicle's power performance, making it suitable for climbing hills or overtaking when extra power is needed. Switching between S mode and D mode can generally be done at any time, but it is advisable to avoid shifting from D to S when the vehicle speed and engine RPM are high. In automatic transmission models, S mode and D mode are essentially the same gear position and use the same shifting mechanism. The difference lies in the tuning of the engine and throttle response, as well as the timing of gear shifts by the transmission, providing drivers with distinct driving experiences.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.