What height is suitable for a motorcycle with a 790mm seat height?

1 Answers
DeMaci
07/30/25 1:08am
A motorcycle with a 790mm seat height is suitable for riders over 170cm tall. Generally, a 700mm seat height fits riders around 160cm, 770mm for 170cm riders, and 810mm for 180cm riders. For riders under 160cm, we recommend using scooters as other motorcycle types may not be suitable. Motorcycle seat heights typically vary by model: cruiser bikes usually have 720-770mm seats, street bikes 770-800mm, adventure bikes 800-900mm, and off-road bikes around 900mm. Different manufacturers may have varying designs. A 165cm rider can typically handle cruiser bikes and street bikes with about 770mm seat height. Some adventure bikes have adjustable seat heights, and lower seat options are also available. Methods to adjust motorcycle seat height: Suspension adjustment: Most motorcycles can be adjusted for height by modifying the suspension. Lowering the suspension can reduce overall height, but adjustments shouldn't be made to the suspension alone - front adjustments are also necessary. The suspension's stiffness can also be adjusted. Wheel modification: Different motorcycles have different hubs. Switching to smaller hubs or flatter tires can help lower the seat height.
Was this review help?
12
0
Share
More Forum Discussions

How to Dispose of Replaced Tires?

Generally, scrap stations or repair shops will recycle them, and you can sell them for money, but the prices are usually low. It is recommended to hand over the old tires to reliable professional organizations for purchase, as these institutions have relatively complete mechanisms. Do not discard old tires randomly by the roadside or burn them casually. Tires are made of rubber, and if left exposed to the sun for a long time, they will emit unpleasant odors. Burning them is even more unfeasible, as they have a high melting point and produce thick smoke when burned, which often contains a large amount of harmful substances.
9
1
Share

What is the normal tire pressure for the 2021 Corolla?

The tire pressure for the 2021 Corolla is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. For the 2021 Corolla, you can check the tire pressure by switching left and right on the buttons located on the left side of the steering wheel. First, press the left or right button on the steering wheel, and then the tire pressure numbers for all four wheels will be displayed on the right side of the instrument panel. Generally, a tire pressure above 2.8 bar is considered too high, and below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear on the central tread of the tire, shortening its lifespan; increases body vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
10
2
Share

Where is the fuel tank cap switch of Geely and how to open it?

First, enter the driver's seat and then turn off the car. After the car is turned off, shift into the parking gear and then take the key out of the car. Walk to the driver's side of the car, which is the left side, and the fuel tank cap is located there. After approaching the fuel tank cap, gently press the fuel tank cap with your hand, and you will hear a pop sound, and the fuel tank cap will automatically pop open. If you want to refuel, you can proceed to do so. Except for refueling, please do not make any modifications to the fuel tank, otherwise, it may easily cause problems.
9
4
Share

What is the correct way to handle a tire blowout?

First, the driver needs to remain calm and grip the steering wheel firmly, while avoiding pressing the accelerator. Next, the driver should ease off the throttle and downshift to gradually slow down the vehicle, while checking the rearview mirror to monitor traffic behind and prevent rear-end collisions. When the driver confirms that the traffic behind is clear, they should seize the opportunity to safely steer the vehicle out of the traffic lane. After pulling over, the driver should park the car, turn on the hazard warning lights, set up warning signs in the direction of oncoming traffic, and quickly move all passengers to a safe location before calling for assistance.
9
4
Share

How to Determine the Most Accurate Parking Point for Reverse Parking?

When visually estimating that the front hood is about to touch the front boundary line, immediately turn the steering wheel all the way to the right. When the car body is about to level out, adjust the steering wheel to straighten the vehicle. Move forward, align the car body straight, keeping about 2 meters from the boundary line, and stop when the wheels reach the control line ahead: the parking point can be determined by the window or your shoulder position. Reverse straight, observing the left mirror: when the lower edge of the left mirror aligns with the control line, immediately turn the steering wheel all the way to the right. When the handle is approximately 30cm away from the corner of the line, turn the steering wheel half a turn to the left. Continue reversing while watching the right mirror; when the corner of the line rises to the upper edge of the mirror frame, turn the steering wheel all the way. When the car body is about to align parallel with the parking space lines, adjust the steering wheel to straighten the vehicle: stop when the lower edge of the left mirror aligns with the garage boundary line, at which point the car is perfectly parked.
17
5
Share

How to Adjust the Lock Beep Sound for Honda XRV?

Sit in the driver's seat of the Honda XRV, press the brake pedal, shift the gear lever to P position, and release the brake pedal; Press the one-touch start button twice in succession with a short interval, and lock all four doors. Hold down the lock button on the driver's side door with your left hand for more than 10 seconds to set the lock beep sound for the Honda XRV.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.