What Happens When You Press the Accelerator in Neutral Gear?

Where is the start-stop switch for the Mercedes-Benz E260?

The automatic start-stop function is located in the functional control area in front of the center armrest, using a mechanical button. To turn it off, simply press the button. 1. Notes: Some models are equipped with both automatic parking and automatic start-stop functions to achieve fuel savings (automatic start-stop) and effort savings (automatic parking). The automatic start-stop temporarily shuts off the engine. Without the automatic parking function, you cannot release the brake pedal. The engine will automatically restart when it detects your foot leaving the brake pedal. Automatic parking helps the driver by automatically applying the brakes. Pressing the accelerator pedal is the signal to release, at which point the vehicle will start moving again. 2. Usage Tips: Turning off the automatic start-stop function is not permanent; the driver needs to disable it each time they drive. Alternatively, it can be permanently disabled by professional coding. Vehicles without hill-start assist should disable this function when starting on a slope to avoid rolling backward.

11

0

Share

What are the reasons for the sluggish acceleration of BYD S6?

The main reasons for the sluggish acceleration of BYD S6 may include incorrect ignition timing, low fuel pressure, air leakage in the intake system, malfunction of the throttle position sensor or mass air flow sensor, poor injector performance, or issues with the EGR system. 1. Troubleshooting: After starting the engine, check if the "Check Engine" warning light turns off; if it does not turn off, inspect the fault code to determine the cause and location of the issue. If the warning light turns off, check the fuel pressure in the supply system, the performance of the injectors, and the quality of the gasoline. Verify if the ignition timing is excessively delayed; if it is, check the knock sensor and the ECU for normal operation. 2. Engine Configuration: The four-speed automatic transmission is paired with a 4G69 2.4L engine from Mitsubishi, with performance parameters of 118kW (160 horsepower)/5800rpm maximum power and 215Nm/3500-4500rpm maximum torque. The 2.0L engine uses the BYD483QB model developed by BYD, with maximum power and torque of 103kW (140 horsepower)/6000rpm and 186Nm/4000-4500rpm, respectively.

10

5

Share

What does the exclamation mark mean in a Mercedes-Benz?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light, and wiper fault indicator light. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the vehicle's general performance, components, or functions. Common issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a brake system warning, primarily indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below it. This represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors, yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system, but the issue is not very serious. Reduce speed and proceed to the nearest repair point to eliminate potential safety hazards. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unforeseen risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic self-check. After the check is completed, they will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit, or lights up while driving, it indicates a fault in the corresponding system. In such cases, seek professional help promptly to inspect and eliminate potential safety hazards.

15

1

Share

What is the weight of the Buick Envision?

Buick Envision weight is divided into: 1610kg and 1800kg. The following is its related introduction: 1. Dimensions: The length, width, and height dimensions are 4686mm/1839mm/1691mm, with a wheelbase of 2750mm. 2. Vehicle positioning: The Buick Envision is positioned as a midsize SUV, with a relatively large body size and ample interior space. 3. Exterior design: The new wing-shaped chrome trim runs through the LED wing-shaped headlights, widening the horizontal visual effect; the dynamic bumper surfaces and three-dimensional silver lower guard create a full and powerful front end. The rear also adopts a three-dimensional wing-shaped design, with the chrome trim connected to the taillights, paired with integrated dual exhaust pipes to enhance the sporty feel.

17

3

Share

Can I Still Drive When Buick Displays 'Service Vehicle Soon'?

You should not continue driving. Here are the relevant details: 1. Possible Causes: When the car dashboard displays 'Service Vehicle Soon', it could be due to missed scheduled maintenance or an engine malfunction. It requires inspection at a repair shop. 2. Vehicle Maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing. 3. Maintenance Items: Modern vehicle maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, among others.

19

4

Share

What is the reason why Toyota cars do not rust?

Toyota cars do not rust because they have full-body sheet metal anti-rust coating. The following are the relevant introductions about the Toyota Corolla: 1. Appearance: It adopts the family design language, retaining the iconic large front grille, which is quite visually impactful. The headlight design is still very sharp, connected to the middle trim strip, creating a certain fierce atmosphere. There are still C-shaped fog light areas on both sides of the grille, enhancing the overall design sense. The rear of the car has a more solid feel, with rich curve designs giving it a strong sense of layering. 2. Power: The new Corolla fuel version offers two engines, a 1.5L three-cylinder and a 1.2T four-cylinder. The new 1.5L three-cylinder engine has a compression ratio as high as 13:1, with a maximum power of 121 horsepower and a peak torque of 148 Nm, and a thermal efficiency of up to 40%; the 1.2T four-cylinder engine has a maximum power of 116 horsepower and a peak torque of 185 Nm; the transmission system is matched with a 6-speed manual or CVT continuously variable transmission.

9

2

Share

What Happens When You Press the Accelerator in Neutral Gear?

Where is the start-stop switch for the Mercedes-Benz E260?

What are the reasons for the sluggish acceleration of BYD S6?

What does the exclamation mark mean in a Mercedes-Benz?

What is the weight of the Buick Envision?

Can I Still Drive When Buick Displays 'Service Vehicle Soon'?

What is the reason why Toyota cars do not rust?

What Causes the Power Window Regulator of the Buick LaCrosse to Fail to Operate?

What are the reasons why the Peugeot 307 won't start?

What is the reason for the BYD S7's turn signal not lighting up and the horn not working?

What is the normal power generation output of a Mercedes-Benz generator?