What happens if you turn the steering wheel too early or too late when reversing into a parking space?

2 Answers
SanAva
07/30/25 2:18am
Turning the steering wheel too early will cause the left edge line of the parking space to be pressed, and if it's too early, the car won't be able to enter the garage. Turning the steering wheel too late will cause the right edge line of the parking space to be pressed, and if it's too late, the car won't be able to enter the garage. Below is an introduction to reversing into a parking space: 1. Introduction: Reversing into a parking space is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the car in a specific area. Reversing into a parking space is a key assessment point in the driver's test, which involves correctly reversing the vehicle into the garage from both sides while in motion. 2. Methods: There are three most common methods for reversing. The first is the "non"-shaped reversing into a parking space, commonly seen in large shopping malls. The second is the roadside "one"-shaped reversing into a parking space, also known as parallel parking. 3. Content: Reverse from starting point A into garage B and park correctly. Proceed to the return area C and stop steadily. Reverse from the return area into garage B, stop steadily, and then return from garage B to A.
Was this review help?
5
2
Share
Grant
08/15/25 8:22am
I remember last time when I was backing into the parking space, I turned the steering wheel too early. The car hadn't fully positioned yet when I started turning, causing the rear wheel to scrape against the nearby concrete pillar, leaving a scratch. Turning too early means the steering wheel is turned too quickly or prematurely, leading to the car body deviating too soon and making the wheels prone to scraping the edge of the parking space or adjacent vehicles. Conversely, if you turn too late, the delayed steering action may cause the car to back straight into the rear wall or obstacle, possibly resulting in a skewed and stuck position that prevents smooth entry. This is a common mistake for novice drivers, but with more practice, they can find the right timing, such as judging the distance through the rearview mirror and turning slowly.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

How much engine oil should be added to the Mondeo Zhisheng 2.3?

The Mondeo Zhisheng 2.3 requires 4 liters of engine oil. When adding oil, ensure the oil level is between the min and max marks on the dipstick, otherwise it may affect the engine's normal operation. The Mondeo Zhisheng 2.3 has the following dimensions: length 4854mm, width 1886mm, height 1495mm, wheelbase 2850mm, fuel tank capacity 70 liters, trunk capacity 450 liters, and curb weight 1586kg. The front suspension is MacPherson strut independent suspension, and the rear suspension is a multi-link independent setup. It produces a maximum horsepower of 160ps, maximum power of 117kw, maximum torque of 205nm, and is paired with a 6-speed automatic transmission.
1
5
Share

How Often Should Carbon Deposits Be Cleaned?

Carbon deposits should be cleaned every 20,000 to 40,000 kilometers. Excessive carbon buildup can reduce the engine's lifespan. Methods for handling carbon deposits include: 1. Cleaning the throttle body—remove the engine cover, detach the throttle body, clean it with carburetor cleaner, dry it with a cotton cloth, and reinstall it; 2. Cleaning internal engine carbon deposits—add an engine internal cleaner into the oil filler port, let the engine idle for 10 minutes, then replace the oil and oil filter; 3. Cleaning the fuel system, injectors, combustion chamber, spark plugs, throttle valve, intake tract, and intake manifold. The effects of carbon deposits on a vehicle: reduced engine power, severe cases may cause engine knocking, acceleration noise, damage to pistons and crankshafts, and even cylinder scuffing.
1
0
Share

What Are the Types of Manual Transmission Fluid?

Manual transmission fluids come in types such as Dexron, Dexron II, Dexron III, and ATFF. Manual transmission fluid helps keep the gear system clean and lubricates to extend the lifespan of the transmission components. Effects of overfilling manual transmission fluid: 1. Increased internal operating resistance of the transmission, leading to abnormal oil leaks; 2. Agitation of the fluid by rotating components can cause air bubbles; 3. Abnormal oil pressure may lead to air blockages in the control valve's oil drain holes, causing poor drainage; 4. May result in gear shifting shocks. Precautions for changing manual transmission fluid: 1. Choose the appropriate viscosity when changing the fluid to avoid power loss; 2. Do not mix different types of transmission fluids to prevent adverse effects on the vehicle; 3. Avoid using low-quality transmission fluid; 4. Ensure no contaminants are introduced during the fluid change process.
7
2
Share

What Are the Solutions When a Car Battery Dies and the Car Won't Start?

When a car battery dies and the car won't start, the solutions are: 1. Push-starting the car manually; 2. Replacing the car battery; 3. Charging the battery; 4. Using jumper cables, ensuring positive connects to positive and negative to negative; 5. Using another vehicle to tow-start the car. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the car's electrical equipment when the engine is off or at low idle; 3. Assisting in power supply when the electrical demand exceeds the alternator's capacity; 4. Stabilizing voltage to protect the car's electronic devices.
2
4
Share

Is Renault a Joint Venture Car?

Renault is a joint venture car, and the types of vehicles it produces include racing cars, compact cars, mid-size cars, recreational vehicles, and large cars. Taking the 2019 Renault City K-ZE as an example, it belongs to the small SUV category, with body dimensions of 3735mm in length, 1579mm in width, and 1484mm in height, a wheelbase of 2423mm, and a curb weight of 921kg. The 2019 Renault City K-ZE features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a permanent magnet electric motor, delivering a maximum power of 33kW and a maximum torque of 125Nm, paired with a single-speed fixed gear ratio transmission.
17
2
Share

Do You Need to Disconnect the Wires When Charging a Car Battery?

You do not need to disconnect the wires when charging a car battery. Disconnecting the positive and negative terminals of the battery may cause partial data loss in the ECU. Steps for charging a car battery without disconnecting it: 1. Connect the positive terminal of the charger to the positive terminal of the battery; 2. Connect the negative terminal of the charger to the negative terminal of the battery to begin charging. Precautions for charging a car battery: 1. In cold weather, check if the electrolyte is frozen before charging. Do not charge a frozen battery as it may cause an explosion; 2. Before charging, check the electrolyte level. Do not charge if the electrolyte is insufficient; 3. During charging, measure the density and voltage of the electrolyte every hour and monitor the temperature.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.