What happens if you forget to engage the handbrake after parking?

1 Answers
DeJuliana
07/29/25 5:44pm
If you forget to engage the handbrake when parking on a flat road, there is no significant impact as long as you shift the gear into neutral or park. However, if you forget to engage the handbrake when parking on a slope, the vehicle may roll away. Additional information: 1. The purpose of the handbrake is to provide braking when parking on flat or inclined surfaces, preventing the vehicle from moving automatically when unattended, thereby avoiding traffic accidents. 2. When stuck in traffic on a slope, always remember to engage the handbrake. During daily driving, it is advisable to maintain a certain distance from other vehicles. If the vehicle starts to roll backward, immediate corrective measures such as stepping on the foot brake and engaging the handbrake should be taken. Additionally, during prolonged parking, remain vigilant and always remember to engage the handbrake. This not only allows your foot to rest but also eliminates the worry of accidentally releasing the foot brake due to distraction, which could lead to the vehicle rolling away.
Was this review help?
8
2
Share
More Forum Discussions

Can I Still Drive When the Car Reminds Me to Change the Oil?

Can I Still Drive When the Car Reminds Me to Change the Oil? You can still drive when the car reminds you to change the oil. Below are some relevant introductions about oil selection: 1. Engine Oil: The choice of engine oil should be based on the requirements of the engine. There is no need to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. 2. Multi-Grade Oil: Multi-grade oil should be chosen whenever possible. Due to its fuel-saving properties, long lifespan, and high efficiency, multi-grade oil provides better protection for the engine. Based on the characteristics of multi-grade oil, phenomena such as premature darkening and lower oil pressure compared to regular oil may occur during use, both of which are normal. 3. Oil Quality: Some domestic brand oils are of quite good quality and are priced significantly lower than similar imported products, making them a reliable choice.
7
5
Share

How long does it take to get a license plate for a motorcycle?

Motorcycle license plates are generally issued on the same day, but there are also cases where, if the number of new vehicle registrations is too high on that day and the plates cannot be produced, you will have to collect the license plate at the time specified by the traffic police. Below is an introduction to the relevant knowledge about motorcycle customs documents: 1. Definition: The shipping order is a document issued by the shipping company that accepts the shipper's application for shipment, commanding the captain to load the goods onto the ship. It serves as the basis for loading and is also the document used by the cargo owner to complete export customs declaration procedures, also known as the customs document. 2. Time to receive the customs document: The customs document for imported vehicles typically takes about 10 working days. From the start of customs declaration to the issuance of the customs document, it takes approximately 10 working days for imported vehicles. When purchasing parallel imported vehicles, it is essential to confirm that the customs document, inspection certificate, conformity certificate, and other relevant vehicle documents are complete before proceeding with the purchase transaction.
2
1
Share

Which Toyota model is referred to as the 'Little Overlord'?

It refers to the Toyota Fortuner. Below is relevant information about the Fortuner: 1. Vehicle appearance and configuration: The color scheme of dark upper and light lower sections paired with silver trim has always been Toyota's signature interior style, which the Fortuner's interior fully demonstrates. In terms of entertainment features, the Fortuner performs well, with the central control screen integrating multiple functions to provide passengers with a relatively diverse range of options. However, in terms of safety features, the Fortuner does not perform as well, only equipped with front airbags. 2. Interior space arrangement: The Fortuner's passenger space performance is good, with ample headroom and legroom in both the front and rear rows. However, the third-row seats are very impractical, as the excessively small legroom makes it very uncomfortable for adults to sit there. The Fortuner's front row has abundant storage space, and the cup holders near the air vents are thoughtfully placed. However, the storage space for rear passengers is disappointingly limited.
15
5
Share

What Does Tire Specification Indicate?

The tire specification indicates the tire's width, aspect ratio, type, and applicable size. Taking 225/60R17 as an example, 225 represents the tire section width of 225mm, 60 is the aspect ratio, meaning the tire sidewall height is 60% of the tire section width, R denotes that the tire is a radial tire, and 17 indicates that the tire is suitable for 17-inch rims. Below is an introduction to radial tires: 1. The crown part of a radial tire is reinforced with steel belts, allowing it to withstand greater internal pressure stress. It features characteristics such as less deformation of the tread, better ground grip, and stability, making it more suitable for high-speed driving. Nowadays, passenger cars commonly use radial tires. 2. Tires can be classified into approximately 8 types based on vehicle categories. Namely: PC — Passenger Car Tires; LT — Light Truck Tires; TB — Truck and Bus Tires; AG — Agricultural Vehicle Tires; OTR — Off-the-Road Tires; ID — Industrial Vehicle Tires; AC — Aircraft Tires; MC — Motorcycle Tires.
16
4
Share

What is the speed range for 3rd gear in a manual transmission?

The speed range for 3rd gear in a manual transmission corresponds to 25~90 kph. The higher the car's power, the higher the maximum speed for each gear. Below is more information about the gear ranges: 1. Speed ranges for each gear: 1st gear speed is 0~30 kph, 2nd gear 10~50 kph, 3rd gear 25~90 kph, 4th gear 35~120 kph, and 5th gear 45 kph and above. 2. Economical driving: If we want to drive economically, it is essential to upshift promptly when the engine speed reaches 2000 rpm. 3. Better power driving: If we want better power while driving, delaying the shift is the best option, but we should also consider the ride comfort inside the car. The engine speed should not be too high; generally, shifting between 2500 rpm~3000 rpm yields better results.
10
1
Share

Should You Start the Engine or Swipe the ID Card First in Subject Two?

In Subject Two, you should swipe your ID card first, and then begin the test after the voice prompt. Below is a relevant introduction to the content of the Subject Two test: 1. Large vehicles: Large buses, tractors, city buses, medium-sized buses, and large trucks are tested on pile parking, hill start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, narrow gate passing, continuous obstacle passing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. 2. Small vehicles: Small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and low-speed trucks are tested on reverse parking, hill start and stop (canceled from June 1, 2021), parallel parking, curve driving, and right-angle turning;
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.