What happens if you forget to bring your vehicle license and get caught by traffic police

2 Answers
MacRonan
08/30/25 6:16am
You can provide the electronic vehicle license and driver's ID to the traffic police. The following is an introduction about the driver's license: 1. According to China's "Road Traffic Safety Law": Drivers must carry their driver's license with them when driving, otherwise they will be fined and receive 1 demerit point, and the vehicle may even be impounded. With an "electronic driver's license", you can travel without carrying the original, and showing the electronic license will not result in penalties. 2. Definition of a motor vehicle driver's license: It refers to the legal certificate issued by the management department to individuals who are legally allowed to learn to drive motor vehicles, after they have mastered traffic regulations and driving skills and passed the relevant tests. 3. Subjects of the motor vehicle driver's license test: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
Was this review help?
20
5
Share
Lauren
09/12/25 3:20am
A friend of mine actually experienced this! That day, he was in a hurry to pick up his child when he was pulled over by traffic police for not carrying his vehicle license. The officers verified the vehicle information on the spot using their equipment, confirmed it wasn't an illegal vehicle, but still issued him a ticket—a warning plus a 50-yuan fine (amounts may vary by region). The officer explained that the vehicle license is like an ID card, and not having it on hand constitutes 'failing to carry required documents,' which could legally result in temporary vehicle impoundment. Fortunately, he had the electronic version on the traffic management 12123 app, so after some lecturing, they let him go. However, it's worth noting that electronic documents aren't universally accepted nationwide, so it's best to keep a paper copy. If stopped, maintaining a cooperative attitude and promptly arranging for someone to deliver the documents or presenting the electronic version can help minimize penalties.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What is the difference between a car DSP and an amplifier?

The differences between a car DSP and an amplifier are as follows: 1. Connectivity with a computer: A DSP can be connected to a computer for better management of the amplifier, whereas an amplifier cannot be connected to a computer. 2. Functionality: A DSP can perform active frequency division and delay processing, while an amplifier lacks the processing capabilities of a DSP. Below is additional information: 1. A DSP is a microprocessor designed to process large amounts of information using digital signals. Its working principle involves receiving analog signals, converting them into digital signals of 0s and 1s, then modifying, deleting, or enhancing these signals before translating them back into analog data or real-world formats in other system chips. 2. An amplifier, or audio power amplifier in a car audio system, selects and preprocesses input audio signals, amplifies their power, and enables the electrical signals to drive speakers.
13
2
Share

How many liters of fuel can a Toyota Prado hold?

Toyota Prado can hold 90 liters of fuel. Precautions for the Toyota Prado fuel tank: (1) The fuel tank storage location must be safe to prevent fires. The fuel tank or oil drum should be placed separately in a visible location, appropriately far from the diesel generator set, and smoking is strictly prohibited; (2) If Toyota Prado users make their own fuel tanks, they should note that the backup diesel generator set fuel tank should be made of stainless steel or steel plates. Do not paint or galvanize the inside of the fuel tank, as these can chemically react with diesel, producing impurities that may damage the diesel generator set and reduce the quality, cleanliness, and combustion efficiency of the diesel; (3) After placing the fuel tank, the highest oil level should not exceed 2.5 meters above the base of the diesel generator set. If the oil level in a large oil depot is higher than 2.5 meters, a daily fuel tank should be added between the large oil depot and the diesel generator set to ensure that the direct fuel delivery pressure does not exceed 2.5 meters. Even when the diesel generator set is shut down, fuel is not allowed to flow into the diesel engine via gravity through the fuel inlet or injection lines; (4) The resistance at the fuel port must not exceed the specified value for using a clean filter element as stated in all diesel generator set performance data sheets. This resistance value is based on the fuel tank being half full.
6
5
Share

What is the trunk capacity of the CRV?

CRV trunk capacity is 520L. How to open the Honda CRV trunk: 1. The car doors need to be unlocked to open the trunk. 2. Go to the trunk, locate the trunk switch (usually above the license plate frame), and pull it to automatically open the trunk. 3. To close, simply pull the handle and shut it. Several methods to open the trunk in Honda models: 1. Gently lift the trunk button to open the trunk lid. 2. If the button doesn’t work, you can use the key to unlock it directly. Many models allow direct trunk unlocking via the key—just press the trunk unlock button on the key. 3. Some models have two additional buttons on the trunk for closing the trunk and closing the trunk while locking the car. Use these buttons to close the trunk.
9
5
Share

How to Turn on High Beam and Low Beam?

The control for high beam and low beam is located on the lever on the left side of the steering wheel. The middle position is for low beam, while the first and third positions are for high beam. The high beam icon is blue with a straight line shape, while the low beam icon is green with a downward-sloping line. Press the corresponding button to turn on the high or low beam, and the lever is moved up and down to switch between them. Here are some relevant details: 1. There is a lever on each side of the steering wheel. The right one is mostly for wiper control, while the left one is for light control, including switching between high and low beams, turn signals, etc. 2. The lever for controlling the light group moves up and down for high and low beams, and forward and backward for turn signals. 3. Both high beam and low beam are part of the headlights, mainly used for nighttime driving illumination. The high beam has a higher angle and longer range, suitable for poorly lit or low-visibility road conditions. The low beam has a lower angle and shorter range, mostly used for well-lit roads with good visibility.
12
3
Share

Is it normal to hear a ticking sound when the engine is warm?

It is normal to hear a ticking sound when the engine is warm. This sound is usually produced by the high-pressure fuel pump or the valves. Many engines equipped with direct injection technology have a high-pressure fuel pump, which can produce a ticking sound during operation. The sound from the valves is caused by increased clearance due to wear between the camshaft and the valve lifters, which is also a normal phenomenon. Here is some relevant information: 1. As the mileage of the car increases, some components inside the engine may experience wear. Direct injection technology has been widely used in car engines. Because the injection pressure of direct injection is very high, direct injection engines also have a high-pressure fuel pump. 2. In a direct injection engine, the fuel injector is installed on the cylinder head and directly injects fuel into the combustion chamber, where the fuel mixes with air. Direct injection technology can improve engine power and fuel economy. The fuel atomization in the engine is better, allowing for more thorough mixing of fuel and air.
19
0
Share

How often should the Tharu be serviced?

The Volkswagen Tharu comes with two turbocharged engine options: 1.4T and 2.0T. For regular maintenance, it is recommended to use at least semi-synthetic oil, but full-synthetic oil is the best choice as it offers superior quality in all aspects. With full-synthetic oil, you can schedule a routine service once a year or every 10,000 kilometers. Here are the five key points for engine maintenance: 1. Use the appropriate grade of engine oil and change it along with the oil filter regularly (every 5,000 kilometers); 2. Maintain the air filter frequently and replace it periodically (every 20,000 kilometers); 3. Clean the fuel system regularly and replace the fuel filter (every 30,000 kilometers); 4. Service the radiator cooling mesh periodically (every 30,000 kilometers); 5. Replace the spark plugs (every 40,000 kilometers or based on driving conditions).
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.