What Happens If You Don't Change Transmission Fluid for 10 Years?

1 Answers
MaryLynn
07/28/25 3:39pm
Not changing transmission fluid for 10 years will cause friction-generated debris in the transmission, making the fluid turbid and reducing its performance. Here's an introduction to transmissions: 1. Overview: The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output and input shafts. 2. Structure: The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also including a power take-off mechanism. It can be categorized into stepped, continuously variable, and integrated transmissions, featuring functions such as enabling reverse driving, interrupting power transmission, and changing gear ratios. 3. Function: Changing the gear ratio to expand the range of torque and speed variations of the driving wheels, adapting to frequently changing driving conditions, while allowing the engine to operate under favorable conditions (higher power and lower fuel consumption).
Was this review help?
8
5
Share
More Forum Discussions

What Causes Hard Brakes in Cars?

There are several reasons for hard brakes in cars: 1. The car's vacuum booster pump is leaking or malfunctioning. The force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its assistance, making it difficult to press down; 2. If you encounter brake failure while driving, repeatedly pressing the brake pedal multiple times can apply pressure to the brake system with air in the oil lines. Repeated pressing may restore braking force; 3. Pressing the brakes after the engine is turned off is related to the brake booster pump. The brake booster pump only continuously generates vacuum when the engine is running. When the engine is off, it relies on the residual vacuum assistance, which is not a malfunction.
6
3
Share

Why Do Cars Experience Brake Failure?

Causes of brake failure: 1. Lack of necessary maintenance in the braking system, leading to excessive impurities in the brake master cylinder, poor sealing, failure of the vacuum booster pump, or contaminated brake fluid; 2. Severe overloading, which increases the vehicle's inertia due to gravitational acceleration; 3. Use of inferior brake fluid. Methods to deal with brake failure: 1. Slow down immediately upon detecting the problem; 2. Activate the vehicle's hazard warning lights to avoid harming others; 3. Continuously press the brake pedal to check if the car can regain braking function and gradually pull up the handbrake to slow the car down; 4. Use contact with nearby structures, railings, or large trees to bring the vehicle to a stop.
2
4
Share

Can I Replace Car Brake Pads Myself?

Car brake pads can be replaced by yourself. The replacement steps are as follows: 1. Lift the car and remove the tire for brake pad replacement; 2. Unscrew the brake caliper bolts, open the brake caliper, and remove the old brake pads; 3. Push the brake piston back in, then install the new brake pads; 4. Reinstall the brake caliper, tighten the caliper bolts to the specified torque (avoid over-tightening), and then reattach the tire. After replacing the brake pads, press the brake pedal several times to eliminate the gap between the pads and the brake disc, allowing the brake piston to reset. Then, check if the brake fluid pump is functioning properly. Once confirmed, the brake pad replacement is complete. Generally, new brake pads require a break-in period of approximately 200 kilometers. Only after this break-in period can the brakes perform more effectively and efficiently.
19
0
Share

Can Car Brakes Be Adjusted for Tightness?

Car brakes can be adjusted for tightness. The adjustment methods are: 1. Adjust the brake pedal travel: The nut below the pedal can be adjusted; 2. Adjust the clearance: The clearance is automatically adjusted and does not require manual adjustment. Car brakes are referred to as braking, which means the action of stopping or reducing the speed of running locomotives, vehicles, other transportation tools, or machinery. Reasons for car brake failure: 1. Severe overload: Under the effect of gravitational acceleration, the vehicle's movement inertia increases; 2. Improper operation: Improper operation leads to mechanical failure, such as prolonged downhill driving causing brake pads to generate heat through friction, brake drums to carbonize, and brake function to completely fail; 3. Lack of brake system maintenance: Excessive impurities in the brake master cylinder, poor sealing, failure of the vacuum booster pump, excessively dirty brake fluid or mixed use of several brake fluids leading to vapor lock when heated, leakage in the brake master cylinder or wheel cylinder, and air leakage from the air reservoir or pipeline connections.
17
0
Share

How to Adjust the Audio Tuning for the Best Effect in the Avalon?

The best effect for audio tuning in the Avalon can be achieved by maintaining the default settings. Here is a related introduction about the Avalon: 1. Overview: The fifth-generation Avalon North American version is an entry-level luxury sedan with two different styling designs, and the hybrid version features a multi-horizontal grille. 2. Interior Design: The fifth-generation Avalon offers a dual-tone interior design. It comes with a 9-inch multimedia touchscreen, a multifunction steering wheel wrapped in genuine leather; the instrument panel features traditional analog gauges on both sides, with a 7-inch HUD display in the center. Behind the gear shift are buttons for driving mode selection and an electronic parking brake.
15
0
Share

What does it mean when the PCS yellow light is on in a Toyota vehicle?

This indicates the Pre-Collision Safety System. Here are the details: 1. Introduction: Toyota's Pre-Collision Safety System is called Pre-Collision-System, abbreviated as PCS. Its luxury brand Lexus was one of the first to apply the pre-collision safety system to mass-produced vehicles and has always been at the world-leading level. 2. Development: The PCS Pre-Collision Safety System first appeared in the 2003 Lexus LX and RX models. The sensor for this system is a millimeter-wave radar installed at the front of the vehicle. This radar can automatically detect obstacles ahead and calculate the possibility of a collision. If the system determines that a collision is highly likely, it will sound an alarm to alert the driver to take evasive action. At this point, other active safety devices will also be integrated, and the Brake Assist (BA) will enter a ready state to assist the driver in braking the vehicle.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.