···
Log in / Register

What Happens If You Don't Change the Car Filter?

4 Answers
SanKennedy
08/30/2025, 04:17 AM

Not changing the car filter will affect the engine's air intake, leading to weak vehicle acceleration. The car filter refers to an accessory that uses filter paper to remove impurities or gases. Filters are categorized into: oil filters, air filters, and fuel filters. The method for replacing an oil filter is: 1. Remove the drain plug to drain the engine oil; 2. Clean the drain plug and tighten it; 3. Loosen the oil filter with an oil filter wrench and remove it; 4. Apply engine oil to the O-ring of the oil filter; 5. Screw on the new oil filter.

Was this review help?
3
4
Share
VonAlexandra
09/12/2025, 01:12 AM

As a car owner, I've personally experienced the consequences of forgetting to replace filters. That time when the air filter hadn't been changed for too long, dust completely clogged the mesh. While driving, I clearly felt the engine struggling, poor acceleration, and fuel consumption inexplicably skyrocketed. When I finally took it to the repair shop, the mechanic said restricted airflow was damaging the engine piston rings, nearly requiring a major overhaul costing thousands. Since then, I've strictly followed the manual's recommendation to replace the air filter every 10,000 km or six months to avoid bigger troubles later. Additionally, not changing the oil filter allows contaminants to accumulate in the oil, accelerating engine wear - in severe cases, it might even cause engine seizure. A clogged fuel filter can also lead to poor fuel delivery, causing frequent stalling. These are no trivial matters - don't lose big by skimping on small things.

Was this review help?
1
0
Share
Expand All
Susan
10/26/2025, 02:01 AM

In my years of dealing with cars, I've observed the chain reactions caused by neglecting filters. A failed air filter allows dust to enter the engine directly, affecting combustion efficiency, reducing power output, and increasing exhaust emissions that pollute the environment. Not replacing the oil filter for a long time leads to impurities circulating and wearing components, shortening engine life and resulting in costly and time-consuming repairs. Fuel filter issues are even more serious, potentially causing fuel pump burnout or nozzle clogging, which will definitely double the repair bill. I advise friends to follow the manufacturer's manual for regular maintenance. Replacing filters costs only around a hundred yuan each time but can prevent major issues. Also, check the cabin air filter, as it affects the air quality inside the car. Not replacing it timely can lead to bacterial growth, and even opening the windows won't easily disperse the odor.

Was this review help?
19
4
Share
Expand All
EllianaAnn
12/09/2025, 01:20 AM

Neglecting filter replacement can cause significant harm. A clogged air filter allows impurities to enter the engine, resulting in reduced power and increased fuel consumption. Failure to replace the oil filter leads to internal component damage and potential burnout. A malfunctioning fuel filter may cause fuel line blockage and engine stalling. Ignoring the cabin air filter deteriorates interior air quality, potentially triggering allergies or unpleasant odors. Don't underestimate these issues - prolonged neglect creates major problems. I routinely inspect filters myself, replacing them when dirty. It's an easy DIY task with low cost that protects your health.

Was this review help?
9
4
Share
Expand All
More Forum Discussions

What to Do When the Brake System Warning Light Comes On?

The solutions for when the brake system warning light comes on are: 1. Check if the handbrake is fully released; 2. Replace the brake fluid; 3. Replace the brake pads. The functions of the brake system are: 1. To ensure the vehicle slows down or stops as required by the driver; 2. To ensure the vehicle is parked securely; 3. To guarantee the safety of the vehicle and the driver. The components of the brake system include: 1. The energy supply device: Various parts that supply, regulate the energy required for braking, and improve the state of the transmission medium; 2. The control device: Parts that generate braking action and control braking effects; 3. The transmission device: Components that transmit braking energy to the brakes, such as the master cylinder and wheel cylinders; 4. The brake: Parts that generate resistance to the movement or tendency of movement of the vehicle.
18
0
Share

Is the Chevrolet Orlando an SUV?

Chevrolet Orlando is not an SUV; it is a compact sedan under the Chevrolet brand. Taking the 2020 Chevrolet Orlando as an example, its body dimensions are: length 4684mm, width 1807mm, height 1628mm, wheelbase 2796mm, fuel tank capacity 45L, trunk capacity 467L, and curb weight 1470kg. The 2020 Chevrolet Orlando features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 230Nm, paired with a 6-speed automatic transmission.
7
4
Share

What is the lifespan of a CVT transmission?

The lifespan of a CVT transmission is approximately 400,000 kilometers. Types of transmissions include manual transmission, semi-automatic transmission, CVT continuously variable transmission, CVT transmission with gears, dual-clutch transmission, AMT transmission, and sequential transmission. The functions of a transmission are: 1. To change the transmission ratio and expand the range of torque and speed changes of the driving wheels, adapting to frequently changing driving conditions and allowing the engine to operate under favorable working conditions; 2. To enable the vehicle to reverse while maintaining the same rotation direction of the engine; 3. To interrupt power transmission using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output.
16
4
Share

When Can I Register for Subject 4?

Generally, you can schedule Subject 4 one week after passing Subject 3, or up to 15 days in some cases. Here are the details about Subject 4: 1. Exam Content: Subject 4 is more challenging than Subject 1. The exam includes single-choice questions (including true/false questions) and multiple-choice questions. The first 45 questions are single-choice, and the last 5 are multiple-choice. 2. Exam Duration: The test lasts for 30 minutes. If you make mistakes totaling 12 points (or 6 questions), the exam will be terminated. 3. Question Types: The questions are complex, including animation-based questions, image-based questions, scenario recognition questions, and text-based questions. The question types are divided into true/false (questions 1-22), single-choice (questions 23-40), and multiple-choice (questions 41-50).
20
0
Share

What's the reason for the Chevrolet Cruze not engaging into gear?

The reasons why the Chevrolet Cruze cannot engage into gear are: 1. Insufficient oil level; 2. Weak battery; 3. Incorrect gear position; 4. Fuel quality issues; 5. Lack of antifreeze; 6. Faulty P-gear locking solenoid valve; 7. Internal failure of the gear lever assembly; 8. Incomplete clutch disengagement. Taking the 2018 Chevrolet Cruze as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 114ps, a maximum power of 84kw, a maximum torque of 146nm, and is matched with a 6-speed manual transmission.
19
2
Share

How to Apply a Roof Wrap?

Here are the steps to apply a roof wrap: 1. Clean the car body: First, clean the car body and ensure it is dry. Remove the decorative strips on the roof. 2. Positioning: Determine the exact position where the wrap will be applied. Generally, apply it slowly while using a tool to smooth it out and peel off the backing paper simultaneously. 3. Applying the wrap: If the design is relatively small, you can peel off both the transparent transfer film and the wrap entirely before applying. However, be careful to avoid accidental adhesion. 4. Smoothing: After application, repeatedly smooth it out several times. Remove the transparent transfer film. Use a utility knife to make a cut at the door and seam areas, then fold it inward for a snug fit. Ensure there are no separations or bulges between the wrap and the car body.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.