···
Log in / Register

What Happens If Traffic Violation Points and Fines Are Not Handled Within a Month?

4 Answers
ElainaFitz
07/29/25 12:24pm

The consequences of not handling traffic violation points and fines within a month are as follows: 1. On-site enforcement: Usually, the fine should be paid promptly, with a deadline typically set at 15 days. Therefore, the vehicle owner must pay the fine in full within 15 days through methods such as banks, online payment, or postal agency points. If the fine is not paid within 15 days, a late fee of 3% of the fine amount will be charged daily. 2. Electronic enforcement (e.g., traffic cameras): The violation needs to be confirmed and the fine paid. The violation can be confirmed online or at the vehicle management office. Once confirmed, the fine must be paid in full within 15 days. However, if the violation is not confirmed, there is no issue even if more than 30 days pass, as long as it is handled before the annual vehicle inspection. Therefore, electronic violations do not need to be processed within 30 days.

Was this review help?
8
5
Share
LaElizabeth
08/13/25 11:27pm

I've been driving for over ten years and have seen plenty of traffic violations. If fines and penalty points aren't handled within a month, the trouble can escalate. Late fees accumulate daily, reportedly increasing by 20% to 50%, leading to a lot of unnecessary extra costs. If accumulated penalty points aren't addressed and reach the full 12 points, the traffic management bureau will require you to retake the written test (Subject One) and undergo re-education. What's even more troublesome is the impact on your personal credit record, which might make it harder to get loans for buying cars or houses in the future. My neighbor once forgot to handle a small ticket, and by the time he remembered, the late fees had nearly matched the original fine, leaving him extremely frustrated. In short, don’t procrastinate—pay the fine as soon as you receive it via the app, saving time, effort, and peace of mind.

Was this review help?
2
5
Share
Expand All
DelLucy
10/09/25 3:33am

As a driver who frequently takes long-distance trips, I believe that ignoring traffic violations is a very dangerous habit. If a fine is not paid within a month, late fees can skyrocket, not only wasting money but also causing penalty points to accumulate to a critical level if not cleared. I personally experienced this once—delaying payment for three weeks resulted in additional fees and nearly affected my annual vehicle inspection. This can also trigger a chain of problems, such as leaving a blemish on your credit report or even having your license temporarily suspended if caught driving with unresolved violations. In the long run, developing a good habit of handling violations promptly is more important. I always remind myself to resolve issues quickly through the 12123 platform to prevent minor issues from escalating. Safety comes first when driving—don’t let these hassles get to you.

Was this review help?
14
0
Share
Expand All
VanLayla
11/22/25 4:49am

I just got my driver's license not long ago and got penalized for running a red light once. My friend warned me that not handling it would lead to bad consequences. If you don't pay the fine within a month, late fees will pile up quickly, possibly costing you hundreds more. The demerit points hanging over your head could accumulate to 12 points, forcing you to attend classes and retake the test—a real headache. At the time, I was worried it might affect my car loan application, so I quickly paid the fine through Alipay. Remember, don't be lazy—delaying will only make things more troublesome and expensive. Handling it promptly makes driving much easier.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

How to Solve Fogging on the Front Windshield?

Solutions for fogging on the front windshield: 1. Cold air defogging: The principle is similar to convection defogging, keeping the inside and outside temperatures the same so that fog does not adhere to the glass; 2. Hot air defogging: Uses the principle of evaporating fog with hot air, which takes less time than cold air defogging; 3. Physical defogging: Use the wiper to clear fog on the outside of the front windshield, and roll the window up and down to clear fog on the side glass. The defogging function has two buttons, for the front and rear respectively. The front windshield defogging icon is fan-shaped, while the rear windshield defogging icon is rectangular. Power windows refer to windows that can be automatically raised or lowered using power. The driver or passenger operates a switch to connect the window lift motor circuit, which generates power to drive a series of mechanical transmissions, allowing the window glass to be raised or lowered as needed.
7
2
Share

What are the functions of a dash cam?

Automobile driving recorders have functions such as identity recognition, recording vehicle driving time, speed, mileage, overtime driving (fatigue driving) alarm and recording. They also include management software, providing a good human-machine interface to achieve vehicle information input, modification, query statistics, and report printing functions. When using a dash cam, secure the recorder to the car's rearview mirror with a clip, place a power supply device in the glove box, and connect it to the central control cigarette lighter. At this point, the dash cam, portable navigation, and radar detector can all be powered by the power supply device. Finally, tuck any excess wiring behind the glove box. Generally, dash cams do not have built-in memory and rely on memory card expansion or mobile digital hard drives. For SD card expansion, capacities vary from 2G, 4G, 8G, 16G, to 32G. For mobile digital hard drives, capacities can be 250G, 500G, 1000G, etc., meeting users' greater video storage needs.
3
2
Share

How many kilometers can a new car run on the highway?

For a brand-new car just off the lot, it's best not to drive on the highway during the break-in period. In principle, within the first 2,500 kilometers, the engine speed should not exceed 2,500 rpm. Most new cars during the break-in period are advised not to exceed 100 km/h in speed, keep the engine speed below 3,000 rpm, and avoid aggressive driving, sudden acceleration, or hard braking. Maintain a steady speed: The key during the break-in period is to drive at a steady speed, avoiding rapid acceleration or braking, and high-speed rotations. Once the break-in period is over, it's necessary to take the car for a highway run. Watch for component damage: Pay attention to any unusual noises, as they may indicate installation or configuration issues with certain components. Remember to address these issues for free during the first maintenance service, as some parts may not be covered for free repairs if damaged after this period.
12
1
Share

Does Car Wheel Hub Modification Affect Vehicle Inspection?

If not approved by the traffic management department, the modified car wheel hubs will fail the annual inspection. The law prohibits arbitrary changes to tire sizes, as it may affect the vehicle's performance and comfort, and in severe cases, jeopardize driving safety and lead to traffic accidents. Additional information is as follows: 1. Regulations: According to the relevant provisions of the current "Motor Vehicle Registration Regulations," any changes to the body color, model, performance, purpose, or structure of a licensed motor vehicle, including replacement of the frame, body, or engine, require the owner to apply for modification registration with the vehicle management office. Installing spoilers, extensive body kits, or modifying exhaust pipes are generally not allowed. 2. Vehicle Inspection: Vehicle inspection refers to the mandatory annual check-up required for all vehicles with official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the "Safety Technical Conditions for Motor Vehicle Operation." Vehicle inspections help promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents.
16
5
Share

What is the correct sequence for engaging P gear and applying the handbrake?

For automatic transmission vehicles, you should first engage the P gear and then apply the handbrake when parking. Alternatively, you can apply the handbrake first and then engage the P gear, but in this case, you must not release the foot brake until the P gear is engaged. Precautions for applying the handbrake: Do not pull the handbrake too tightly, as overstretching the metal cable or keeping it stretched for a long time can accelerate deformation and aging, leading to a loosened handbrake or cable breakage. Avoid applying the handbrake after driving on snowy or icy roads in winter, as accumulated snow may freeze the handbrake, making the vehicle unable to move. Additionally, when washing the car in winter, avoid using the handbrake; instead, use a gear or bricks to secure the vehicle. Do not park on a slope with the handbrake engaged for extended periods. Precautions for gear shifting: Do not look down at the gear lever when shifting gears. Coordinate the clutch properly when shifting gears. Control the speed before shifting gears. Avoid skipping gears when shifting.
15
1
Share

How to Distinguish Good and Bad Car Paint Jobs?

Methods to distinguish good and bad car paint jobs are as follows: 1. Check the drying quality of the paint film: Press the painted surface firmly with your finger to see if there are obvious fingerprints. If fingerprints appear, it indicates poor drying of the paint film. The car needs to be re-baked in a paint booth. 2. Check if the color of the paint matches the original paint: Under good lighting conditions, carefully observe the repainted area and the adjacent body of the car for 7-10 seconds. Cross-check by looking directly at it and then at an angle (30-45 degrees) to see if there is any noticeable color difference. Note that dark-colored cars should be compared against the light, while light-colored cars should be compared with the light behind them. 3. Check the fullness of the paint film and the uniformity of the paint texture: Look directly at the fullness of the paint film. If the paint film is too thick, it will appear cloudy and dull; if it is too thin, the surface will lack brightness and appear dark. A well-full paint film will have a glossy, oily appearance.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.