What happens if the aspect ratio difference between front and rear tires is 5?

What is a front bumper reinforcement?

Front bumper reinforcement refers to the structure that provides support and fixation for the bumper cover. Component function: Automobile bumpers (impact beams), located in most areas at the front and rear of the vehicle, are designed to prevent external damage from affecting the vehicle's safety systems. These components have the capability to reduce injuries to occupants during high-speed collisions and are increasingly being designed for pedestrian protection. Definition origin: Automobile bumpers are safety devices that absorb and mitigate external impacts, protecting the front and rear of the vehicle body. Twenty years ago, car bumpers were primarily made of metal materials, using steel plates over 3mm thick pressed into U-shaped channels, with chrome-plated surfaces. They were riveted or welded to the frame longitudinal beams with a relatively large gap from the vehicle body, appearing as an additional component.

9

0

Share

What is the Daqi car?

Daqi refers to the Luxgen 7 SUV, a mid-size SUV with body dimensions of 4845mm in length, 1876mm in width, and 1768mm in height, and a wheelbase of 2910mm. The Luxgen 7 SUV is a fashionable and intelligent high-end urban SUV under Taiwan's Yulon Motor. Here is some information about the Luxgen 7: The Luxgen 7 SUV is equipped with two engines, one being a 2.0-liter turbocharged engine and the other a 2.2-liter turbocharged engine. The 2.0-liter turbocharged engine delivers 163 horsepower and a maximum torque of 250 Nm, with maximum power output at 5200 rpm and maximum torque output between 2500 and 3000 rpm. The 2.2-liter turbocharged engine produces 201 horsepower and a maximum torque of 295 Nm, with maximum power output between 5000 and 5500 rpm and maximum torque output between 2400 and 4000 rpm.

1

3

Share

Does the CRH380BL have charging ports?

CRH380BL has charging ports. Detailed introduction: The CRH380B(L) train model is equipped with two power sockets per row, located under the backrest of seat C (aisle side) and between seats D and F (also under the backrest). If charging is inconvenient from your seat (e.g., seat A), it is recommended to directly go to the dining car upon boarding. The dining car is more comfortable than second-class seats and, most importantly, offers convenient charging with power sockets available at all window-side seats. Interior layout: The CRH380B EMU train offers various seating classes including first-class, second-class, sightseeing, and VIP seats. Second-class cars feature a 2+3 seating arrangement; first-class cars have a 2+2 layout. VIP seats are located in the business car (also known as the VIP car) with a 1+2 arrangement, featuring high-grade reclining seats similar to first-class airline seats. Like the CRH3 EMU, the CRH380B also has compartments at the rear of both end cars, known as the sightseeing area, where passengers can observe the cockpit operations through transparent glass walls.

16

4

Share

Should You Engage the Handbrake or Shift Gears First When Starting a Car?

When starting a car, you should shift gears first and then engage the handbrake. Here is some additional information about shifting gears: 1. Once you are familiar with the car and the driver's operation is sensitive, it is also possible to release the handbrake first and then shift gears. However, before releasing the handbrake, you need to step on the brake, then shift gears, release the brake, press the accelerator, and start the car. 2. Before starting the vehicle, ensure that either the handbrake or the brake is in working condition. This is because, in actual driving, it is often difficult for the driver to determine whether the road has a slope from inside the cabin. This operation can prevent the vehicle from rolling backward or sliding forward. When starting, remember to quickly accelerate the car and shift to second gear to avoid affecting the vehicles behind.

11

3

Share

How to Install the Headlight Bulb of Vios?

Vios headlight bulb installation method is as follows: 1. Unplug the power socket of the bulb. When unplugging the bulb power socket, apply moderate force to avoid loosening the socket wiring or damaging the bulb plug. 2. After disconnecting the power interface, remove the waterproof cover behind the bulb. The material of the headlight waterproof cover is mostly soft rubber, and some models are equipped with soft plastic waterproof covers, which are no different. Just apply a little force to remove the waterproof cover. 3. Remove the bulb from the reflector. When removing the bulb, use your fingers to pinch the steel wire clips on both sides. Once the bulb is loosened, pull it out. 4. Place the new bulb into the reflector, aligning the fixed slots on the bulb base. There are several fixed slots on the bulb base. Install the new bulb by reversing the steps of removing the old bulb: pinch the steel wire clips to insert the bulb into the reflector, align the installation position, and then release the clips to secure the bulb. 5. When covering the waterproof cover, ensure that the edge of the waterproof cover is completely fitted with the fixed position. Finally, connect the headlight power socket, and the operation of replacing the headlight is completed.

8

3

Share

What is Fatigue Driving?

Fatigue driving refers to the phenomenon where a driver experiences physiological and psychological dysfunction after prolonged continuous driving, resulting in an objective decline in driving skills. Here are some preventive methods: 1. Control speed: High-speed driving can easily make the driver nervous. Driving slightly below the normal speed without affecting traffic can reduce mental stress and fatigue. Additionally, minimizing overtaking and emergency braking during driving can also alleviate fatigue. 2. Ventilate more while driving: When feeling drowsy during driving, opening the window for ventilation, playing different styles of music, chewing gum, or applying some essential oil to the philtrum and taking deep breaths can help keep the mind clear and reduce fatigue. 3. Take more breaks: For long-distance driving, it is advisable to pull over every two hours, get out of the car, and rest for 10 to 15 minutes. Look into the distance, stretch the body, and relax the ankles. 4. Adjust the seat: Slightly tilting the seat backward can help maintain body balance while driving and relieve pressure on the neck and back. For vehicles without lumbar support, adding a lumbar cushion between the back and the seat can make long-distance driving more comfortable.

12

0

Share

What happens if the aspect ratio difference between front and rear tires is 5?

What is a front bumper reinforcement?

What is the Daqi car?

Does the CRH380BL have charging ports?

Should You Engage the Handbrake or Shift Gears First When Starting a Car?

How to Install the Headlight Bulb of Vios?

What is Fatigue Driving?

Is it normal for the tire temperature to display 40℃?

What is the fuel consumption of the 3.0L GL8?

Do Canadians drive on the left or right side of the road?

What are the differences between the Yaris and the Vios?